Canon projector LVWX300ST User Manual
Here you can view all the pages of manual Canon projector LVWX300ST User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
71 ENGLISH Supported timing for HDMI (HDCP) input Supported PC timings *Supported timing for 3D signal in Frame Sequential, Top-Bottom and Side-By-Side formats. **Supported timing for 3D signal in Frame Sequential format. ***Supported timing for 3D signal in Top-Bottom and Side-By-Side formats. Resolution ModeVertical Frequency (Hz)Horizontal Frequency (kHz)Clock (MHz) 720 x 400 720 x 400_70 70.087 31.469 28.3221 640 x 480VGA_60* 59.940 31.469 25.175 VGA_72 72.809 37.861 31.500 VGA_75 75.000 37.500...
Page 72
72 Supported Video timings *Supported timing for 3D signal in Frame Sequential format. **Supported timing for 3D signal in Frame Packing and Top-Bottom formats. ***Supported timing for 3D signal in Side-By-Side format. Supported timing for Component-YPbPr input Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Timing ResolutionHorizontal Frequency (kHz)Ve r t i c a l Frequency (Hz)Dot Clock Frequency (MHz)...
Page 73
73 ENGLISH Control Commands You can control this projector by sending commands via CONTROL port or LAN port. System Requirement CONTROL port LAN port Control Command Connection Cable 9-pin RS-232-C Cable (Crossover) Communication Mode RS-232-C asynchronous, half-duplex communication Baud Rate 19200 bps Character Length 8 bit Parity Check None Stop Bits 2 bit Flow Control None Connection System TCP/IP Connection Port 33336 FunctionRead/ WriteOperationCommand (ASCII)Note PowerW Power On POWER=ONEnable...
Page 74
74 Image ModeW Presentation IMAGE=PRESENTATION W Standard IMAGE=STANDARD W sRGB IMAGE=SRGB W Movie IMAGE=MOVIE W User1 IMAGE=USER_1 W User2 IMAGE=USER_2 R Image Mode GET=IMAGE AspectW Aspect 4:3 ASPECT=4:3 W Aspect 16:9ASPECT=16:9 W Aspect Auto ASPECT=AUTO W Aspect RealASPECT=TRUE W Aspect 16:10ASPECT=16:10 R Aspect Status GET=ASPECT Image Flip H/VW Front Table IMAGEFLIP=NONE W Rear Table IMAGEFLIP=REAR W Front Ceiling IMAGEFLIP=CEILING W Rear Ceiling IMAGEFLIP= REAR_CEIL RImage flip H/V...
Page 75
75 ENGLISH Control Response OperationW Blank On BLANK=ON W Blank Off BLANK=OFF R Blank Status GET=BLANK W Freeze On FREEZE=ON W Freeze Off FREEZE=OFF R Freeze Status GET=FREEZE W Menu On MENU=ON W Menu Off MENU=OFF W Auto PC RC=AUTOPC W Up RC=UP W Down RC=DOWN W Right RC=RIGHT W Left RC=LEFT W OK RC=OK High AltitudeWHigh Altitude mode OnHIGHALT=ON WHigh Altitude mode OffHIGHALT=OFF RHigh Altitude mode statusGET=HIGHALT Read/ WriteConditionResponseExample W Success i:OK< BLANK=ON > i:OK WIllegal format :...
Page 76
76 • If the projector didn’t receive to finish a command within 5 seconds, it will timeout and you need to resend the command. • No case sensitive.RUnsupported item: this command parameter cant supporte:000A INVALID_PARAMETER< GET=INVALID > e:000A INVALID_PARAMETER
Page 77
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada For...