Canon projector LVWX300ST User Manual

61
ENGLISH
Timing of replacing the lamp
When the lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, 
please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector 
and in some instances the lamp may explode.
The LAMP indicator light and TEMPerature indicator light will light up if the lamp becomes too hot. 
Turn the power off and let the projector cool for 45 minutes. If the Lamp or LAMP indicator light still 
lights up...

62
Replacing the lampSpare lamp: LV-LP38 (LV-X300ST)/LV-LP40 (LV-WX300ST)
• Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. 
Contact your dealer for purchase of the lamp.
• To reduce the risk of electrical shock, always turn the projector off and disconnect the power 
cord before changing the lamp.   
• To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before 
replacing the lamp.
• To reduce the risk of injuries to...

63
ENGLISH
3. Remove the lamp cover from the projector.
,
Pull up the lamp cover, pushing up the allow parts of the front 
panel.
• Do not turn the power on with the lamp cover removed.
• Do not insert your fingers between the lamp and the 
projector. The sharp edges inside the projector may 
cause injuries.
4. Remove and dispose of the lamp protection film.
5. Loosen the screw that secures the lamp.
6. Lift the handle so that it stands up. Use the handle to slowly 
pull the lamp out of the projector.
•...

64
13. Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
14. After the startup logo, open the On-Screen Display (OSD) 
menu. Go to the SYSTEM SETUP: Advanced > Lamp 
Settings menu. Press OK/IMAGE. The Lamp Settings 
page is displayed. Press   to highlight Reset lamp timer 
and press OK/IMAGE. A warning message is displayed 
asking if you want to reset the lamp timer. Highlight Reset 
and press OK/IMAGE. The lamp time will be reset to 0.
Do not reset if...

65
ENGLISH
Indicators
LightStatus & Description
POWERTEMPLAMP
Power events
Orange Off Off
Stand-by mode.
Green
FlashingOff OffPowering up.
Green Off OffNormal operation.
Orange
FlashingOff OffNormal power-down cooling.
Red Off OffFW Download.
Green Off RedColor Wheel start fail.
Red
FlashingOff OffScaler shutdown fail (data abort).
Lamp events
Off Off Red
Lamp error in normal operation.
Off OffRed 
FlashingLamp is not lit up.
Thermal events
Red Red Off
Fan 1 error (the actual fan speed is +25% outside...

66
Troubleshooting
The projector does not turn on
No picture
Blurred image
Remote control does not work
The password is incorrect
The LAN function cannot be used
CauseRemedy
There is no power from the power cable.Plug the power cord into the AC inlet on the projector, and 
plug the power cord into the power outlet. If the power 
outlet has a switch, make sure that it is switched on.
Attempting to turn the projector on again 
during the cooling process.Wait until the cooling down process has completed....

67
ENGLISH
Specifications
Projector specifications 
All specifications are subject to change without notice. 
Model name LV-WX300ST LV-X300ST
Display system 1-CHIP DLP™
Optical system Time division color extraction, sequential display
Ty p e D M D
Size / Aspect ratio 0.65 x 1/16:10 0.55 x 1/4:3
Drive system DLP™ x 1 chip
Number dots / Total number dots 1,024,000 (1280 x 800) x 1 
panel/1,024,000786,432 (1024 x 768) x 1 
panel/786,432
Focal length /F value 6.9mm /F2.60
Focusing system Manual
Lens shift V:...

68
•*1 Compliance with ISO21118-2012
• Note that using the projector continuously for a long period of time may make the optical 
components deteriorate faster.
Model name LV-WX300ST LV-X300ST
HDMI terminal Digital PC, digital video input
ANALOG PC / COMPONENT 
terminalAnalog PC, Component (mini D-sub 15-pin)
Mini-DIN4 S video input
RCA terminal Video input
LAN terminal Network connection (100BASE-TX / 10BASE-T)
USB Port Service port
CONTROL terminal RS-232C (D-sub 9-pin)
AUDIO IN terminal Audio signal...

69
ENGLISH
Dimensions
282 mm (W) x 117.9 mm (H) x 267.5 mm (D) / 11.1 in (W) x 4.6 in (H) x 10.5 in (D) (including the 
protrusion)
282 mm (11.1”) 267.5 
mm 
(10.5”)
117.9 
mm 
(4.6”)
Tolerance:±2 mm (0.08 in) 91 mm 
(3.6”) 

70
Timing chart
Supported timing for PC input
*Supported timing for 3D signal in Frame Sequential, Top-Bottom and Side-By-Side formats.
**Supported timing for 3D signal in Frame Sequential format.
***Supported timing for 3D signal in Top-Bottom and Side-By-Side formats. Resolution Mode Refresh Rate (Hz)Horizontal 
Frequency (kHz)Clock (MHz)
720 x 400 720 x 400_70 70.087 31.469 28.3221
640 x 480VGA_60* 59.940 31.469 25.175 
VGA_72 72.809 37.861 31.500 
VGA_75 75.000 37.500 31.500 
VGA_85 85.008 43.269...