Canon projector LV7296 User Manual

71

Appendix
	 No	image – Check the connection between your computer or video               equipment and the projector. See pages 17-19.    – See if the input signal is correctly output from your computer.            Some laptop computers may need to change the setting for                                                                monitor output\
 when connecting to a projector. See your            computer’s instruction manual for the setting.     – It takes about 30 seconds to display an image...

7

Appendix

	 The	image	is	distorted	or	runs	off.	– Check PC	adjust menu or Screen menu and adjust them.          See pages 33-34, 38-40.
	 PIN	code	dialog	box	appears – PIN code lock is being set. Enter a PIN code (the “134” or numbers    at	start-up.   you have set). See pages , 60-61.
	 The	Remote	control	unit	does  – Check the batteries.  not	work.  – Make sure no obstruction is between the projector and remote      control.     – Make sure you are not too far from the projector...

Appendix

73

Appendix

Menu Tree
Computer	Input/VIDEO	Input
VolumeMuteOn/OffSound0-63
ANALOG PCCOMPONENT
S-VIDEO
ANALOG PC
SCART
Input
VIDEO
COMPUTER 1
COMPUTER 
MICOn/OffMIC GAIN0-63STANDBY MIC OUTOn/Off
Presentation
CinemaBlackboard (Green)
User 1
Image	selectStandard
ColorboardRed/Blue/Yellow/Green
User 4
High contrast
InformationInput Source Information Display
LanguageSetting0 languages provided.
Blue/User/BlackOff /On/Countdown offLogo select
Standby
On/Off
Code 1–Code ...

74

Appendix

VIDEO	Input
Auto1080i1035i70p575p480p575i480i
0–630–63
Off
System	()AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
System	(3)
Image	AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
User 1
Aspect
Yes/No
OffNoise reductionL1L
0–630–63
User 4
LL1
Film
Color temp.
Scale
Reset
H/V
H/VYes/NoYes/No
Custom adj.On/OffH&V
MidLowXLow
UserHigh
PositionCommon
Auto irisOff/On
SVGA 1Mode 1Mode  - - - -
Total dotsHorizontal...

Appendix

75

Appendix

Check the indicators for projector condition.                                   
• • • green.• • • red• • • off
• • • blinks green.
 When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.     When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 6,68)
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER button to turn on the projector.
Projector...

76

Appendix

Compatible	Computer	Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock.  When selecting these modes, PC adjustment can be limited.
ON-SCREEN	DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)VGA 1640 x 48031.4759.88VGA 70 x 40031.4770.09VGA 3640 x 40031.4770.09VGA 4640 x 48037.8674.38VGA 5640 x 48037.867.81VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60MAC 13640 x...

Appendix

77

Appendix

Technical	Specifications
Mechanical	InformationProjector TypeMulti-media ProjectorDimensions (W x H x D) 13.13" x 3.98" x 9.7" (333.5mm x 101.0mm x 47.0mm) (Not including protrusions)Net Weight6.57 lbs (.98 kg)Foot Adjustment0˚ to 10˚
Panel	Resolution
LCD Panel SystemLV-790, LV-795: 0.55”;   LV-7390: 0.63”;   LV-85: 0.59"TFT Active Matrix type, 3 panelsPanel ResolutionLV-790, LV-795, LV-7390: 1,04 x 768...

78

Appendix

     Model No.
COMPONENT-VGA	Cable	 		 :	LV-CA3
S-VIDEO-VGA	Cable	 		 :	LV-CA33
Soft	Carrying	Case	   : LV-SC01
Remote	controller		    : LV-RC03   
Projector	Attachment	    : LV-CL17
Ceiling	Attachment                                       : LV-CL18 
High	Ceiling	 Attachment                              : LV-CL19
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales dealer.
Accessories User’s Manual (CD-ROM)...

Appendix

79

Appendix

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the user’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Pj	Link	Notice
Projector Input
ANALOG PC
COMPUTER ...

80

Appendix

COMPUTER	IN	1	/	S-VIDEO	IN/	COMPONENT	IN	
Terminal:	Analog	RGB	(Mini	D-sub	15	pin)
512341096781514131112
Configurations	of	Terminals
Red/Cr/S-C Input   
Ground (Horiz.sync.)
Green/Y/S-Y Input
-----
Blue/Cb/--- Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data
Ground
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
RX –
TX +
TX –
RX +
2
3
4
5
6
7
8
1
LAN	TERMINAL
-----
-----
----------
CONTROL...