Canon projector LV7296 User Manual

31

Computer	Input
PC	System	Menu
PC	System	Menu
Computer	System	Selection
This projector automatically tunes to various types of computers with it\
s Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatical\
ly detects the signal format and tunes to project a proper image without any additional settings. (Signal formats\
 provided in this projector are shown on page 76.)
One of the following messages may appear when:
When the projector cannot...

3

Computer	Input

Auto PC Adjustment function is provided to automatically adjust Fine	sync, Total	dots, Horizontal	position and Vertical position to conform to your computer.
PC	adjust	Menu
Auto	PC	Adjustment
To	store	adjustment	parametersThe adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode	(1–10) in the PC System Menu (p.31). See also “Store” on page 34.
Note: • Fine	sync, Total	dots,...

Computer	Input

33

Computer	Input

PC	adjust	Menu
Manual	PC	Adjustment
Some computers employ special signal formats which may not be tuned by M\
ulti-scan system of this projector.  Manual PC Adjustment enables you to precisely adjust several parameters to match t\
hose signal formats. The projector has 10 independent memory areas to store those parameters manu\
ally adjusted. It allows you to recall the setting for a specific computer. 
1
2
Use the Point ◄► buttons to adjust the value, eliminating a...

34

Computer	Input

Store
To store the adjusted data, select	Store	and then press the Point ► or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button.
Mode	free
To clear the stored data, select Mode	free and then press the Point ► or the OK button. Move the highlight to the Mode that you want to clear and then press the OK button.
Note: • Display	area	(H/V)	cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected...

Computer	Input

35

Computer	Input

Image	select	Menu
IMAGE	button
Presentation
High	contrast
User 1
User 2
User 3
Image	Mode	Selection	
User 4
Blackboard(Green)
Standard
Remote	control	unit
IMAGE	button
Select the desired image mode among Presentation, Standard, High	contrast, Cinema, Blackboard	(Green), Colorboard, User 1, User 2, User 3 and  User 4 by pressing the IMAGE button on the remote control unit.
Standard
Picture mode with improved halftone for graphics.
High	contrast
Blackboard	(Green)
User...

36

Computer	Input

Image	Adjust	Menu
Image	Adjustment
Reset
Press the MENU button to display the On-Screen Menu.  Use the Point ▲▼ buttons to select Image	adjust and then press the Point ► or the OK button.
1
2Use the Point ▲▼ buttons to select the desired item and then press the OK button to display the adjustment dialog box.  Use the Point ◄► buttons to adjust the setting value.
Note:• When White balance Red, Green or blue is    adjusted, Color	temp. will change to User.• When Blackboard(Green) or...

Computer	Input

37

Computer	Input

Aspect	Setting		(for	LV-7290,	LV-7295,	LV-7390)
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Aspect and then press the Point ► or the OK button.
Use the Point ▲▼ buttons select the desired item and then press the OK button .
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Aspect	Menu
Provide the image to fit the screen size.Normal
True
Provide  the  image  in  its...

38

Computer	Input

Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit. 
To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, OK and Point buttons.
Digital	zoom	+
Select...

Computer	Input

39

Computer	Input

Aspect	Setting		(For	LV-8225)
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Aspect	Menu
Provide the image to fit the screen size.Normal
True
Provide the image in its original size. When the original  image size is larger or smaller than the screen size (180 x 800), the projector enters to the panning  mode  automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red....

40

Computer	InputVIDEO	Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit. 
To exit the Digital zoom +/- mode, press any button except the D.ZOOM +/- buttons, OK and Point buttons.
Digital	zoom...