Canon projector LV7296 User Manual

							
MULTIMEDIA PROJECTOR
User’s Manual 
						

							


Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display (LCD) technology.
♦	 Compact	Design
 This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use.
♦	 Simple	Computer	System	Setting
 The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.31). Up to WUXGA resolution can be accepted.
♦	 Useful	Functions	for	Presentations
 - The digital zoom function allows you to focus on the crucial information during a presentation (pp.38,40) 
  - The MIC function and 10W audio output allows you to make a presentation without any external audio equipment (p.7).
♦	 Lamp	mode
  Brightness of the projection lamp can be selected (pp.8, 59).
♦	 Direct	Power	Off	Function
 With the Direct Power Off function, you can disconnect the power cord from the wall outlet or turn off the breaker even during projection (p.3).
♦	 Logo	Function
 The Logo function allows you to customize the screen logo (pp.53-55). You can capture an image for the screen logo and use it for the starting-up display or between presentations.
♦	 Multilanguage	Menu	Display
 Operation menu is available in 0 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Turkish, Kazakh, Vietnamese, Chinese, Korean, Japanese and Thai (p.51).
♦	 Security	Function	
 The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top 
control or remote control unit (p.60). PIN code lock function prevents unauthorized use of the projector (pp., 60-61).
♦ Helpful	Maintenance	Functions
 Lamp and filter maintenance functions provide for better and proper maintenance of the projector.
♦	 LAN	Network	Function	
 This projector is loaded with the Wired LAN network function. You can operate and manage the projector via network. For details, refer to the user’s manual of “Network Set-up and Operation.”
♦	 Auto 	Setup 	Function 	
 This function enables Auto input, Auto Keystone correction and Auto PC adjustment by simple pressing the AUTO SET button on the top control (p.5).
♦	 Colorboard 	Function 	
   At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
♦	 Switchable	Interface	Terminal
 The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently (p.56).
♦	Power	Management	Mode
 The Power management mode function reduces power consumption and maintains the lamp life (p.56).
♦	 Closed 	Caption
    This is a printed version of the program sound or other information displayed on the screen. You can turn on the feature and switch the channels. (p.58) 
						

							
3

Table	of	Contents
TrademarksEach name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table	of	Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To	the	Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety	Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation 8
Installing the Projector in Proper Position 8
Moving the Projector 8
Compliance .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .9
Part	Names	and	Functions  .  .  .  .  .  .  .  .10
Front  10
Back 10
Bottom 10
Rear Terminal   11
Top Control 1
Remote Control Unit 13
Remote Control Unit Battery Installation 14
Remote Control Unit Operating Range  14
Remote Control Code 14
Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .15
Positioning the Projector  15
Adjustable Foot 16
Connecting to a Computer 17
Connecting to VIDEO Equipment 18
Connecting to COMPONENT VIDEO 
and SCART Equipment 19
Using the ferrite core 0
Connecting the AC Power Cord  0
Basic	Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .21
Turning On the Projector  1
Turning Off the Projector 3
How to Operate the On-Screen Menu  4
Main Menu 5
Zoom and Focus Adjustment  6
Auto Setup Function 6
Keystone Correction 6
Sound Adjustment 7
Remote control unit Operation  8
Computer	Input	  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .30
Input Source Selection (ANALOG PC: 
COMPUTER 1/COMPUTER )  30
Computer System Selection 31
Auto PC Adjustment 3
Manual PC Adjustment 33
Image Mode Selection  35
Image Adjustment 36
Aspect Setting  
(for LV-790, LV-795, LV-7390) 37
Aspect Setting  (For LV-85) 39
VIDEO	Input .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .41
Input Source Selection 
(VIDEO, S-VIDEO)  41
Input Source Selection 
(COMPONENT, SCART) 4
VIDEO System Selection 43
Image Mode Selection  44
Image Adjustment 45
Aspect Setting 
(for LV-790, LV-795, LV-7390) 47
Aspect Setting (for LV-85) 49
Setting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .51
Setting  51
Information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .64
Input Source Information Display  64
Maintenance	and	Cleaning  .  .  .  .  .  .  .  .65
WARNING indicator  65
Replacing the Filter 66
Resetting the Filter Counter 66
Attaching the Lens Cap 67
Cleaning the Projection Lens 67
Cleaning the Projector Cabinet 67
Lamp Replacement 68
Appendix .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .70
Troubleshooting  70
Menu Tree 73
Indicators and Projector Condition 75
Compatible Computer Specifications 76
Technical Specifications 77
Optional Parts 78
PJ Link Notice 79
Attaching the Filter Cover to the Projector 79
Configurations of Terminals 80
PIN Code Protection 81
Dimensions 8 
						

							
4

To	the	Owner
CAUTION:				TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	BACK).	NO	USER-SERVICEABLE	PARTS	INSIDE	EXCEPT	LAMP	REPLACEMENT.	REFER	SERVICING	TO	QUALIFIED	SERVICE	PERSONNEL.
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	ARE	IMPORTANT	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	THE	USER'S	MANUAL	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before installing and operating this projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section on pages 70-7 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.
     Safety	Precaution
DO	NOT	SET	THE	PROjECTOR	IN	GREASY ,	WET,	OR	SMOKY	CONDITIONS	SUCH	AS	IN	A	KITCHEN	TO	PREVENT	 A	BREAKDOWN	OR	
A	DISASTER.	IF	THE	PROjECTOR	COMES	IN	CONTACT	WITH	OIL	OR	CHEMICALS,	IT	MAY	bECOME DETERIORATED .
READ	 AND	KEEP 	THIS	USER'S	MANUAL 	FOR	LATER	USE.
WARNING:		
  		THIS	APPARATUS	MUST	BE	EARTHED.
  		TO	REDUCE	THE	RISK	OF	FIRE	OR							ELECTRIC	SHOCK,	DO	NOT	EXPOSE	 							THIS	 APPLIANCE	TO	RAIN	OR			MOISTURE.
–  This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.–  Install the projector in a proper position. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.–  Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.
–  Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.–  If the projector is unused for an extended time, unplug the projector from the power outlet.–  Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.
SIDE and TOPREAR
0.7’(20cm)
1.5’(50cm)3’(1m)3’(1m)
20cm
50cm1m1m
CAUTIONNot for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
NOTE	FOR	CUSTOMERS	IN	THE	US Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. 
						

							
5

To	the	OwnerSafety	Instructions
All  the  safety  and  operating  instructions  should be read before the product is operated.
Read all of the instructions given here and retain them  for  later  use.  Unplug  this  projector  from AC  power  supply  before  cleaning.  Do  not  use liquid  or  aerosol  cleaners.  Use  a  damp  cloth  for cleaning.
Follow  all  warnings  and  instructions  marked  on the projector.
For  added  protection  to  the  projector  during  a lightning storm, or when it is left unattended and unused  for  long  periods  of  time,  unplug  it  from the  wall  outlet.  This  will  prevent  damage  due  to lightning and power line surges.
Do  not  expose  this  unit  to  rain  or  use  near water...  for  example,  in  a  wet  basement,  near  a swimming pool, etc...
Do  not  use  attachments  not  recommended  by the manufacturer as they may cause hazards.
Do  not  place  this  projector  on  an  unstable  cart, stand,  or  table.  The  projector  may  fall,  causing serious  injury  to  a  child  or  adult,  and  serious damage  to  the  projector.  Use  only  with  a  cart or  stand  recommended  by  the  manufacturer,  or sold  with  the  projector.  Wall  or  shelf  mounting should  follow  the  manufacturer ’s  instructions, and  should  use  a  mounting  kit  approved  by  the manufacturers.
A n   a p p l i a n c e   a n d   c a r t combination  should  be  moved with  care.  Quick  stops,  excessive force,  and  uneven  surfaces  may c a u s e   t h e   a p p l i a n c e   a n d   c a r t combination to overturn.
Slots  and  openings  in  the  back  and  bottom of  the  cabinet  are  provided  for  ventilation,  to ensure  reliable  operation  of  the  equipment  and to protect it from overheating.
The  openings  should  never  be  covered  with cloth or other materials, and the bottom opening should  not  be  blocked  by  placing  the  projector on a bed, sofa, rug, or other similar surface. This projector  should  never  be  placed  near  or  over  a radiator or heat register.
This  projector  should  not  be  placed  in  a  built-in installation  such  as  a  book  case  unless  proper ventilation is provided.
Never push objects of any kind into this projector t h r o u g h   c a b i n e t   s l o t s   a s   t h e y   m a y   t o u c h dangerous  voltage  points  or  short  out  parts  that could result in a fire or electric shock. Never spill liquid of any kind on the projector.Do  not  install  the  projector  near  the  ventilation duct of air-conditioning equipment.This  projector  should  be  operated  only  from  the type  of  power  source  indicated  on  the  marking label.  If  you  are  not  sure  of  the  type  of  power supplied,  consult  your  authorized  dealer  or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow  anything  to  rest  on  the  power  cord.  Do not  locate  this  projector  where  the  cord  may  be damaged by persons walking on it.
Do  not  attempt  to  service  this  projector  yourself as opening or removing Covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug  this  projector  from  wall  outlet  and  refer servicing  to  qualified  service  personnel  under the following conditions:a. When the power cord or plug is damaged or      frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or   water.d.  If  the  projector  does  not  operate  normally  by following  the  operating  instructions.  Adjust only  those  controls  that  are  covered  by  the operating instructions as improper adjustment of  other  controls  may  result  in  damage  and will often require extensive work by a qualified technician  to  restore  the  projector  to  normal operation.e. If  the  projector  has  been  dropped  or  the cabinet has been damaged.f.  When the projector exhibits a distinct change    in performance-this indicates a need for    service.
When  replacement  parts  are  required,  be  sure the  service  technician  has  used  replacement parts  specified  by  the  manufacturer  that  have the  same  characteristics  as  the  original  part. Unauthorized  substitutions  may  result  in  fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,  ask  the  service  technician  to  perform routine  safety  checks  to  determine  that  the projector is in safe operating condition. 
						

							
6

Safety	Instructions

Immediately turn the power off, unplug the projector, and contact your dealer under the following conditions, otherwise a fire or an electric shock may result. –  If smoke comes out from it.–  If it emits a strange odor, or makes a strange noise.–  If lamp goes out with a loud bang.–  If water or any other liquid gets into it.–  If metal or foreign objects get inside it.–  If it is knocked down or dropped and the cabinet is broken.
	WARNING
Follow the instructions below when using the power cable, otherwise a fire, an electric shock, or injury may result. –  Do not place heavy objects on the power cord or position the power cord under the projector. Doing so may damage the power cord.–  Do not run the power cord under a carpet. As it goes unnoticed, excessive load may be applied on the cord unintentionally. –  Do not modify, bend forcibly, twist, or pull the power cord. –  Do not place the power cord near heat generating equipment or heat it.–  Do not bend, wind, or bind excessively the power cord when using it.–  Be sure to connect the projector to a grounded outlet. Failure to do so may result in an electric shock.–  Do not continue to use a damaged power cord. If the power cord is damaged, take it to your dealer and have it replace. –  Use only the supplied power cord.
Follow the instructions below when handling the power plug or connector, otherwise a fire, an electric shock, or injury may result.–  Use the projector within the voltage range specified on the projector (AC 100 V– 40 V). –  Insert the power plug or connector into the power outlet firmly. Do not use a damaged or loosen power plug or connector.–  Be sure to hold the power cord plug or connector when disconnecting it from the power outlet. If the power cord itself is pulled, it may be damaged. –  Do not plug or unplug the power cord with wet hands.–  Disconnect the power cord from the power outlet before cleaning the projector.–  Do not stick metal objects into the electrical contacts of the power plug or connector.
Follow the instructions below to install or handle the projector. Otherwise, a fire, an electric shock, or injury may result. –  Do not touch the projector, power cord, or cables when lighting begins.–  Do not use the projector in a bathroom or shower room.–  Do not expose the projector to rain, snow, or use near water.–  Do not insert metal objects into the projector through the air vents.–  Do not place the containers with water on the projector.–  Do not install in the locations exposed to oily vapors or smoke (e.g., near a cooking table or humidifier).–  Before moving the projector, turn the power off and disconnect the power cord and all cables.–  Do not put spray cans in front of the exhaust vent. When spray cans are exposed to heat, the pressure in them will increase and explode.–  Do not open nor remove the cabinet. There are high voltage components inside the projector. Contact your dealer for inspection, adjustment, and service. –  Do not attempt to disassemble the projector (including expendable parts) or remote control unit.–  Do not look into the lens while the projector is used. Strong light may hurt your eyes. Be especially careful that small children do not look into the lens.
–  When an extension cord is necessary, be sure that the total current load of all equipment connected to the extension cord does not exceed the specified rating of the extension cord.–  Periodically unplug the power cord and remove the dust that builds up on the power cord or connector.
Follow the instructions below when handling the batteries. Failure to do so may cause explosion, heat generation, a fire, or leakage of the battery fluid. –  Do not heat or disassemble the batteries, or throw them into fire.–  Do not attempt to recharge the batteries.
Follow the instructions below when the lamp is replaced or breaks.–  Always unplug the power cord before replacing the lamp.–  When the lamp breaks, shards of glass may scatter in the lamp housing. Contact your dealer for cleaning or inspecting the projector, or replacing the lamp.
	WARNING
	WARNING
	WARNING
	WARNING
	WARNING 
						

							
Safety	Instructions

7

Safety	Instructions

–  Remove the batteries when they have been exhausted or not in use for an extended period of time.–  Be sure to replace both batteries at the same time. Do not mix batteries of different types.–  Insert batteries correctly according to the “+” and “-“ markings.–  If a fluid from a battery leaks and comes in contact with your skin, rinse the affected skin thoroughly as soon as possible.
–  Do not place heavy objects or step on the projector. Be especially careful that small children do not step on the projector. If not, the projector may drop or break, causing injury.–  Disconnect the power cord from the power outlet if the projector is left unused for a long period of time. Failure to do so may result in a fire. –  Do not bring your hands to the peripheral part of the exhaust vent on the cabinet. This area becomes hot during use. Be especially careful that small children do not touch the area. Failure to do so may result in burn. –  Do not put metal objects in front of or near the exhaust vent. They will become hot while projector is being used.–  Do not place the projector on top of unstable or slanted surfaces. The projector may fall down and cause injury.–  Do not attach the lens cover while the projector is being used or place any objects in front of the lens. Failure to do so may result in a fire. –  A buildup of dust inside the projector can cause a fire or damage. Consult your dealer for cleaning. –  When installing the projector to a ceiling, consult your electrician or dealer. If the projector is not fixed securely, accidents may result. 
–  Never take out the lamp soon after the projector is used. Let the projector cool for at least 1 hour before taking out the lamp, as burns may result.–  If the lamp replacement icon appears or the LAMP REPLACE indicator lights orange, immediately replace the lamp with a new one. Otherwise, the lamp may burst. –  If the lamp burns out, the gas or dust (containing mercury) inside the lamp may escape from the air vents. Immediately open the windows and ventilate the room. If you inhale the gas or the gas gets into your eyes or mouth, see a doctor at once.–  Dispose of a lamp containing mercury in the same manner as fluorescent lamps according to local regulations.
–  This projector is a precision machine. Do not subject the projector to strong shocks or vibrations or knock it down. Remove the lens, close the lens mounting hole with the front cover, and retract the adjustable feet before placing the projector into the carrying case. The projector may be damaged if you place it in the case without retracting the adjustable feet. –   Place the projector into the specified case when transporting it by courier or any other transportation service. Consult your dealer for the case.–  Keep space of 1 m or more at the sides of the projector between the intake/exhaust vents and walls. Poor ventilation may cause malfunction.–  Do not install the projector in the locations with heavy dust, high humidity, oily vapors, or cigarette smoke.   A buildup of dust on the optical elements such as lens or mirror may degrade image quality. –   Directly touching the lens may cause poor image quality. –  If the projector is carried from a cold place to a warm place or the room temperature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture. Wait until condensation evaporates and normal picture is shown.–  Do not install the projector in the locations with great difference in temperature. Doing so may cause malfunction. The ranges of the operating and storage temperatures are as shown below:Operating temperature: 41˚F–95˚F [5˚C–35˚C]Storage temperature: 10˚F–140˚F (-10˚C–60˚C)–   Do not install the projector near high-voltage electric power lines or power sources.–  Do not place the projector on a carpet or bed. The internal temperature will rise, causing malfunction.–   To avoid increase in the internal temperature, do not block the intake/exhaust vents.–  Position the projector at a proper angle. Incorrect positioning may cause troubles and accidents. Do not roll the projector more than 0 degrees from the horizontal.–  Do not place any heat-sensitive objects on the projector. 
Precaution	During	Use
	CAUTION
	CAUTION 
						

							
8

Safety	Instructions
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. 
–   Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.–   Keep the exhaust vent at least 3’ (1 m) away from any objects.–   Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.–  Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.–  Make sure that there is no object under the projector to prevent from covering the bottom openings.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
Moving	the	Projector
When moving the projector, retract the adjustable foot to prevent damage to the cabinet and use a suitable carrying case.When this projector is not in use for an extended period, put it into a suitable case to protect the projector.
Air	Circulation
Exhaust Vent(Hot air exhaust)
Do not pitch the projector more than 30 degrees from above and below.
Do not point the projector up to project an image.
Do not point the projector down to project an image. 
Do not put the projector on either side to project an image. 
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
Do not roll the projector more than 0 degrees from side to side.20°
20°
30°
30°
CAUTION	IN	CARRYING	OR	TRANSPORTING	THE	PROjECTOR
–  Do not drop or bump the projector, otherwise damages or malfunctions may result.–   When carrying the projector, use a suitable carrying case.–   Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.–  Do not put the projector in a case before the projector is cooled enough.
Air Intake Vent
Air Intake Vent (Filter)
Installing	the	Projector	in	Proper	
Position 
						

							
Safety	Instructions
9
Compliance
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC	Power	Cord	for	the	United	States	and	Canada:
 AC  Power  Cord  used  in  the  United  States  and  Canada  is  listed  by  the  Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug.  This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.GROUND
AC	POWER	CORD	REQUIREMENT 
Federal	Communications	Commission	Notice
Multimedia Projector, Model:  LV-790, LV-795, LV-7390, LV-85 
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions:   (1) This device may not cause harmful interference, and   () this device must accept any interference received, including interfer\
ence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  a  residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications. However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause  harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by  turning  the  equipment  off and on, the user is encouraged to try to correct the interference by one\
 or more of the following measures: – Reorient or relocate the receiving antenna.  – Increase the separation between the equipment and receiver.  – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  – Consult the dealer or an experienced radio/TV technician for help.Use of shielded cable is required to comply with class B limits in Subpa\
rt B of Part 15 of FCC Rules.Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop o\
peration of the equipment.
Canon U.S.A., Inc.One Canon Plaza, Lake Success, NY 1104-1198, U.S.A.Tel No. (516)38-5600
Canadian	Radio	Interference	Regulations
This Class B digital apparatus complies with Canadian ICES-003.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE. 
						

							
10
Part	Names	and	Functions
⑤⑦⑧
③②
Front
Back
⑥
① Top	controls	and	Indicators② Zoom	Ring③ Focus	Ring④ Speaker⑤	 Infrared	Remote	Receiver⑥ Projection	Lens⑦ Lens	Cap (See page 67 for attaching.)
⑧ Air	Intake	Vent
⑨ Lamp	Cover⑩ Terminals	and	Connectors⑪ LAN	Connection	Terminal⑫ Power	Cord	Connector
Note:
Replace only with the same types of the supplied cords or cables. Using improper cords or cables may cause an electric shock or a fire.  
⑬ Exhaust	Vents
 CAUTION
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
⑭ 	Air	Intake	Vent	(Filter) ⑮ Adjustable	Foot
Note:
⑪ LAN Connection Terminal is for the Network function. Refer to the user’s manual of “Network Set-up and Operation” .
 Kensington	Security	Slot
This slot is for a Kensington lock used to deter theft of the projector.*Kensington is a registered trademark of ACCOKensington is a registered trademark of ACCO  Brands Corporation.
 CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
⑪⑨

Bottom⑮
①
⑬⑬⑫
⑭
④
⑩