Canon Projector LV-X300ST User Manual
Have a look at the manual Canon Projector LV-X300ST User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 ENGLISH • During standby • During input source switching • During command processing • During AUTO PC execution • Before the splash screen disappears after the power is turned on. • Use 1 computer to control/monitor 1 projector. • For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use. • When you monitor the projectors operating state using this function by issuing inquiry commands successively, issue an inquiry command after receiving the response to the previous inquiry command from the projector. Using the Network Function when the projector is in standby mode When the Standby LAN in the SYSTEM SETUP: Advanced > LAN Settings menu is activated, the projector is able to provide the network function when it is in standby mode. Glossary For more detail of the glossary below, refer to the technical book that is commercially available. Te r mDescription DHCPAbbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Address to networked devices. IP Address Numerical address to identify networked computers. Subnet MaskA numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. Default GatewayA server (or router) to communicate across networks (subnets) that are divided by Subnet Mask.
52 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. * Indicates an item that is factory-set (after reset). Main menu Sub-menu Options 1. DISPLAY Screen ColorOff*/Light Yellow/Pink/Light Green/Blue/Blackboard AspectAuto*/Real/16:10 (LV-WX300ST)/ 4:3/16:9 Keystone Position Phase H. Total Dots D.Zoom 3DAuto*/Frame Sequential/ Frame Packing/Top-Bottom/ Side-By-Side 3D Sync Normal*/Invert 2. PICTURE Image ModePresentation/Standard*/sRGB/ Movie/User 1/User 2 Brightness Contrast Color Tint Sharpness BrilliantColor™ On*/Off Color TemperatureHigh/Middle*/Low 6-axis Color AdjustSelect Color R*/G/B/C/M/Y Hue Saturation Brightness 3. INPUTAuto Search On*/Off
53 ENGLISH * Indicates an item that is factory-set (after reset). Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Presentation TimerPreset Time 1~240 minutes Timer Display Always*/1 min/2 min/3 min/Never PositionTop-Left*/Bottom-Left/Top-Right/ Bottom-Right Counting DirectionCount Down*/Count Up Sound Reminder On*/Off On/Off* Language Image flip H/VFront Table*/Rear Table/ Front Ceiling/Rear Ceiling Auto Power OffDisable/5 min/10 min/15 min/ 20 min*/25 min/30 min Blank TimerDisable*/5 min/10 min/15 min/ 20 min/25 min/30 min Panel Key Lock Off*/On Sleep TimerDisable*/30 min/1 hr/2 hr/3 hr/4 hr/ 8 hr/12 hr Splash Screen Black/Blue/Canon* 5. SYSTEM SETUP: Advanced Quick Cooling On/Off* High Altitude Mode On/Off* Audio SettingsMute On/Off* Volume Menu SettingsMenu Display Time5 sec/10 sec/15 sec*/20 sec/ 25 sec/30 sec Menu PositionCenter*/Top-Left/Top-Right/ Bottom-Right/Bottom-Left Lamp SettingsLamp Mode Normal*/Economic Reset Lamp Time Lamp Time
54 • * Indicates an item that is factory-set (after reset). • The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 5. SYSTEM SETUP: Advanced Security SettingsChange Password Power On Lock On/Off* Closed Caption SettingsClosed Caption On/Off* Caption Channel CC1*/CC2/CC3/CC4 LAN SettingsStandby LAN Off*/On PJLink CertificationOff*/On Change PJLink Password DHCP On*/Off Projector IP Address Subnet Mask Default Gateway DNS Server Apply Reset All Settings 6. INFORMATIONCurrent System StatusInput Image Mode Color Format Resolution Lamp Time
55 ENGLISH Description of each menu FUNCTIONDESCRIPTION Screen ColorCorrects the projected picture’s color when the projection surface is not white. See Using Screen Color on page 39 for details. AspectThere are several options to set the images aspect ratio depending on your input signal source. See Selecting the aspect ratio on page 35 for details. KeystoneCorrects any keystoning of the image. See Correcting keystone on page 34 for details. PositionDisplays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. PhaseAdjusts the clock phase to reduce image distortion. H. Total DotsAdjusts the horizontal width of the image. D.ZoomMagnifies or reduces the projected image. See Magnifying and searching for details on page 35 for details. 3DThis projector features a 3D function which enables you to enjoy 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images. See Watching 3D content on page 44 for details. 3D SyncWhen you discover the inversion of the image depth, enable this function to correct the problem. 1. DISPLAY menu
56 FUNCTIONDESCRIPTION Image ModePre-defined image modes are provided so you can optimize your projector image set-up to suit your program type. See Selecting a image mode on page 37 for details. BrightnessAdjusts the brightness of the image. See Adjusting Brightness on page 37 for details. ContrastAdjusts the degree of difference between dark and light in the image. See Adjusting Contrast on page 37 for details. ColorAdjusts the color saturation level -- the amount of each color in a video image. See Adjusting Color on page 37 for details. TintAdjusts the red and green color tones of the image. See Adjusting Tint on page 38 for details. The function is only available when Video or S- Video with NTSC system is selected. SharpnessAdjusts the image to make it look sharper or softer. See Adjusting Sharpness on page 38 for details. BrilliantColor™Adjusts white peaking while maintaining correct color presentation. See Adjusting BrilliantColor™ on page 38 for details. Color TemperatureSee Selecting a Color Temperature on page 38 for details. 6-axis Color AdjustSee 6-axis Color Adjust on page 38 for details. Auto SearchSee Switching input signal on page 32 for details. 2. PICTURE menu 3. INPUT menu
57 ENGLISH FUNCTIONDESCRIPTION Presentation TimerReminds the presenter to finish the presentation within a certain time frame. See Setting the presentation timer on page 40 for details. LanguageSets the language for the On-Screen Display (OSD) menus. See Using the menus on page 29 for details. Image flip H/VSee Choosing a location on page 19 for details. Auto Power OffAllows the projector to turn off automatically if no input signal is detected and no operation is made by user after a set period of time. See Setting Auto Power Off on page 60 for details. Blank TimerSets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See Hiding the image on page 41 for details. Panel Key LockDisables or enables all panel key functions except POWER on the projector and keys on the remote control. See Locking control keys on page 41 for details. Sleep TimerSets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Splash ScreenAllows you to select which logo screen will be displayed during projector start-up. See Personalizing the projector menu display on page 42 for details. Quick CoolingSelecting On enables the function and the projector cooling time will be shortened to a few seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans. Audio SettingsSee Adjusting the sound on page 42 for details. Menu SettingsSee Personalizing the projector menu display on page 42 for details. Lamp SettingsLamp Mode See Setting Lamp Mode as Economic on page 60 for details. Reset Lamp Time See Resetting the lamp timer on page 64 for details. Lamp Time See Getting to know the lamp hour on page 60 for details on how the total lamp hour is calculated. Security SettingsSee Utilizing the password function on page 30 for details. 4. SYSTEM SETUP: Basic menu II 5. SYSTEM SETUP: Advanced menu
58 FUNCTIONDESCRIPTION Closed Caption SettingsClosed Caption Settings Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as CC in TV listings). When the projector displays OSD or any dialog, captions are not displayed at the same time. Caption Channel Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). LAN SettingsIf you are using a LAN cable for connection, see Supervising and controlling by computer on page 46 for details. If you are using the PJLink™ application, see Controlling the projector using PJLink™ application on page 49 for details. Reset All SettingsReturns all settings to the factory preset values. The following settings will still remain: User 1, User 2, Language, Image flip H/V, High Altitude Mode, Security Settings, LAN Settings, “Tools“ menu in web UI, PJLink Password. Current System StatusInput Shows the current signal source. Image Mode Shows the selected mode in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color Format Shows input system format. Lamp Time Displays the number of hours the lamp has been used. 5. SYSTEM SETUP: Advanced menu 6. INFORMATION menu
59 ENGLISH Maintenance Care of the projector Your projector needs maintenance from time to time, depending on the environmental circumstances, and should be done by authorized service technicians only. Contact your dealer for instructions. The only thing you can do yourselves on a regular basis is to keep the lens and cabinet clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface. • Use a canister of compressed air to remove dust. • If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the lens surface. • Never rub the lens with abrasive materials. Cleaning the projector case Before you clean the case, turn the projector off using the proper shutdown procedure as described in Shutting down the projector on page 42 and unplug the power cord. • To remove dirt or dust, wipe the case with a soft, lint-free cloth. • To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH detergent. Then wipe the case. • Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case. • Flammable substances may ignite causing fire or breakdown while the lamp is illuminating. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to Specifications on page 67 or consult your dealer about the range. • Retract the adjuster feet. • Remove the battery from the remote control. • Pack the projector in its original packing or equivalent. Transporting the projector It is recommended that you ship the projector with its original packing or equivalent.
60 Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Total Lamp Hour = (hours used in Normal mode) + 2/3*(hours used in Economic mode) See Setting Lamp Mode as Economic below for more information on Economic mode. To obtain the lamp hour information: 1. Press MENU and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight Lamp Settings and press OK/IMAGE. The Lamp Settings page is displayed. 3. You will see the Lamp Time information appearing on the menu. 4. To leave the menu, press MENU. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item that normally can last up to 4000 (used in Normal mode)–6000 (used in Economic mode) hours with proper usage. Such interval differs depending on the operating environment and may be shorter than 4000–6000 hours. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. Setting Lamp Mode as Economic Using Economic mode reduces system noise and power consumption by approximately 20%. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp Mode menu and press / . • When this mode is switched, the projected images may flicker. • If this mode is frequently switched, the lamp may be deteriorated. Setting Auto Power Off This function allows the projector to turn off automatically if no input source is detected and no operation is made by user after a set period of time to prevent unnecessary waste of lamp life. To s e t Auto Power Off, go into the SYSTEM SETUP: Basic > Auto Power Off menu and press / . The time period can be set from 5 to 30 minutes in 5-minute increments. If the preset time lengths are not suitable for your presentation, select Disable. The projector will not automatically shut down in a certain time period.