Canon Projector LV-X300ST User Manual

ENGLISH
MULTIMEDIA PROJECTOR
LV-WX300ST/LV-X300ST
User’s Manual 

2
Table of Contents
Table of Contents ........................... 2
Safety instructions ......................... 3
Contents of package ..................... 13
Projector exterior view ................ 14
Controls and functions ................ 15
Positioning your projector  .......... 19
Choosing a location ......................... 19
Obtaining a preferred projected 
image size ........................................ 20
Connection .................................... 23
Connecting a computer or...

3
ENGLISH
Safety instructions
Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the projector properly enables 
you to manage those features and maintain it in good condition for many years to come.
Improper operation may result in not only shortening the product life, but also malfunctions, fire hazards, 
or other accidents.
If your projector does not seem to be operating properly, read this manual again,...

4
Safety Precautions
WARNING:
• THIS APPARATUS MUST BE GROUNDED.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
• This projector produces intense light from the projection lens. Do not stare directly into the lens, 
otherwise eye damage could result. Be especially careful that children do not stare directly into the 
beam.
• Install the projector in a proper position. Otherwise it may result in a fire hazard.
• Allowing the proper amount of space on...

5
ENGLISH
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious 
injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended 
by the manufacturer, or sold with the projector. For wall or shelf mounting, use a tool such as a mounting 
kit to secure the projector.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause the appliance and cart...

6
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the country you 
purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY 
ACCESSIBLE.AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is listed by the 
Underwriters Laboratories (UL) and certified by the Canadian Standard 
Association (CSA).
The AC Power Cord has a grounding-type AC line plug.  This is a safety feature...

7
ENGLISH
Safety Symbols in this Manual
This section describes the safety symbols used in this manual. Important projector safety information is 
identified by the following symbols. Always observe the safety information by these symbols.
Federal Communication Commission Notice
Multimedia Projector, Model: LV-WX300ST / LV-X300ST
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two 
conditions:
(1) This device may not cause harmful interference, and
(2) this...

8
Precautions for Use
As this section contains important safety-related information, be sure to read the following carefully 
beforehand in order to use your projector correctly and safely.
If the following situations occur, turn the power off, remove the power plug from the power outlet and 
contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric 
shock. 
• If smoke is emitted
• If an unusual smell or noise is emitted
• If a loud noise is heard and the...

9
ENGLISH
Precautions for Installation
Pay attention to the following points regarding the power source, power plug and handling of the 
connector. Failure to do so could result in a fire, electric shock or personal injury. 
• Do not use any power source with a voltage other than the voltage indicated (AC 100 – 240 V).
• Do not pull the power cord and be sure to hold the power plug or connector when removing. The 
cord could be damaged as a result.
• Do not insert any metal objects into the contact parts...

10
Precautions on the lamp
This projector uses a high-pressure mercury lamp, which must be handled carefully and correctly as 
described below.
The mercury lamp has the following characteristics.
• Impact, abrasion, or use after the lamp’s useful life has expired may damage lamps (which may be 
accompanied by a loud noise) or cause them to burn out.
• Useful life of lamps varies widely from lamp to lamp and depending on the environment of use. 
Lamps are not guaranteed to last for the same amount of...