Canon printer PIXMA SELPHY CP710 User Manual

							
49
When disconnecting the USB cable, you do not need to turn off the printer or your computer.
1Connect one end of a commercially available USB cable to the USB 
port on the printer, and the other end to a USB port on your 
computer. 
zThere is no need to turn off the printer or your computer.
zWhen connecting the printer to your computer, make sure the connectors on the ends of 
the USB cable match the ports on the printer and your computer. 
zFor the location and direction of your computer’s USB port, refer to the documentation 
provided with your computer. 
USB port 
on computerUSB cable  
						

							
50
Software Manuals
Adobe Reader or Adobe Acrobat Reader must be installed to view the PDF Manuals. If this 
software is not already installed in your computer, access the following web site and 
download the software. 
http://www.adobe.com/products/acrobat/readstep2.html
„Printer Software Guide
This guide describes how to print using the software installed to your computer. 
zIf you need the Printer Software Guide  in a different language:
zThe ImageBrowser Software User Guide  describes in detail the functions and operations 
of the ImageBrowser software for the Macintosh. This guide can be downloaded from the 
following web site if it is required.
 http://web.canon.jp/Imaging/information-e.html
1Install the software from the CP Printer Solution Disk. 
(Windows   p. 42, Macintosh   p. 45) 
zThe  Printer Software Guide  will automatically be install ed to your computer, and the 
[CP Printer Guide] icon appears on the desktop.
2Double-click  [CP Printer Guide].
zPrinter Software Guide  will be displayed.
CP Printer Guide
Windows/Macintosh:Double-click the desired language fol der in the [README] folder 
on the  CD-ROM, then double-click [CP PRINTER USER 
GUIDE]  
						

							
51
Uninstalling the Software
Uninstall the software when it is no longer needed, or if a problem occurs and uninstalling 
becomes necessary. Note that if you uninstall the software, you will not be able to use it 
anymore. 
Windows
The instructions in this section are intended for uninstallation of Easy-PhotoPrint.
zYou can use the same procedure to uninstall PhotoStitch.zTo uninstall PhotoRecord, click the [Start] button and select [All Programs] or 
[Programs] [Canon PhotoRecord] [PhotoRecord Uninstall].
Macintosh
Please be careful not to accidentally delete any folders with downloaded images that may 
be contained within the application folder. 
1Click the [Start] button and select [All Programs] or 
[Programs] [Canon Utilities] [Easy-PhotoPrint] [Easy-
PhotoPrint Uninstall].
zFollow the screen messages to proceed.
1Drag the application’s folder (the folder in which it was installed) 
into the Trash.
2Empty the Trash.  
						

							
52
Uninstalling the Printer Driver
Uninstall the printer driver if it is no longer needed, or if a problem occurs and uninstalling 
becomes necessary. Note that if you uninstall the printer driver, you will no longer be able to 
use the printer to print.
Windows
Be sure to follow the procedures described in this section to uninstall the printer.
1Click the [Start] and select [All Programs] or [Programs] [Canon 
SELPHY CP XXX] [Uninstall].
2Select the printer you will uninstall and click [Next].
zFollow the screen messages to proceed.  
						

							
53
Macintosh
Next, delete the printer from the Printer List.
1Place the CP Printer Solution Disk in the CD-ROM drive, and 
double-click the [Canon CP Printer Installer] icon.
zThe installer panel appears.
2Click the CP Printer Driver [Install] button. 
3Click the printer you wish to uninstall.
4Click [Agree] if you consent to all the conditions of the software 
license agreement.
5Select [Uninstall], and then click the [Uninstall] button.
6Follow the screen messages to proceed. When a dialog box 
appears instructing that the installation is complete, click [Quit]. 
Remove the CP Printer Solution Disk from the CD-ROM drive. 
7Double-click the [Printer Setup Utility] or [Print Center] icon in 
[Applications] [Utilities] folder. 
zThe Printer List window appears.  
						

							
54
8Select the printer you uninstalled, and then click the [Delete] 
button.
9Close the window by clicking  in the upper left-hand corner.  
						

							
55
Using the Battery Pack (sold separately)
You can print outdoors or at locations without a power outlet by installing the battery pack 
NB-CP2L (sold separately).
Proper Usage and Handling of the Battery Pack   Battery (sold separately) (p. 17)
zThe battery pack NB-CP1L (sold separately) cannot be used.zDo not use the battery pack in products other than those recommended by Canon.
Attaching and Charging the Battery Pack
Use the printer for charging the battery pack.
Install the battery pack NB-CP2L on the printer to charge the battery pack. 
1Remove the battery pack’s 
terminal cover.
When the battery pack is not in use, 
always store it with its terminal cover 
on. 
2Press the battery cover lever 
down and remove the battery 
cover.
3Install the battery pack on the 
printer.
zSlide the battery pack into place, in the 
direction of the arrow, and push it in until 
it clicks into place. 
To remove the battery pack, push the 
battery cover lever down and pull the 
battery pack out. Replace the battery 
cover afterwards.
Terminal cover
1
2
12  
						

							
56
When the battery pack is used to power the printer, the printer will automatically turn off if it 
is idle for 5 minutes or more.
„Battery Status
If battery status is low, the printer’s power button blinks orange. 
Also, the camera’s LCD monitor or printer’s LCD monitor (CP710 only) display an error 
message (p. 62). 
Switch the battery pack for a fully charged one or recharge the battery pack.
4Attach the power cord to the 
Compact Power Adapter CA-
CP200 and plug it into a 
power outlet.
5Connect the compact power 
adapter cable to the printer.
zThe power button lights orange while 
charging and turns off once the battery 
pack is fully charged.
If the power button is pressed and the 
printer’s power turns on while 
charging the battery pack, charging 
will stop. Pressing the power button 
again will turn off the printer and 
charging will resume.
6Disconnect the compact 
power adapter cable from the 
printer once charging is 
complete.
zThe battery pack can be used to 
power the printer.
Compact power
adapterPower cord
To power outlet
Power  butt on
Compact power adapter cable  
						

							
57
Appendix
Cleaning the Printer
„Cleaning Inside the Printer
If faint stripes appear in the printed image, a probable cause is that dust has 
accumulated inside the printer. Remove any dust using the cleaner stick included with 
your printer.
„Cleaning the Printer Casing
Wipe the casing with a soft dry cloth. If stronger cleaning is required, wipe first with a 
cloth moistened with a diluted neutral solvent, then wipe again with a soft dry cloth. If you 
use a chemical cleaning cloth, read the instructions that come with it and observe all 
indicated precautions. 
Never use benzene, paint thinner, or other volatile solvents to clean the printer. Volatile 
solvents may cause deformation or peeling of the printer’s casing. 
„Cleaning the Back of the Printer
Keep the air vents clean and free of dust. Clean the vents as necessary. Dust that enters 
the printer through the vents may land on the ink sheet, resulting in poor print quality.
If the ink sheet becomes dusty, remove the ink cassette and replace it with a new one.
1Remove the ink cassette.
2Insert the cleaner stick in 
the direction of the arrow 
and with the arrow on the 
cleaner stick facing up. 
Push it in completely and 
slide it in and out of the 
printer 2 or 3 times.  
						

							
58
Troubleshooting
If the printer does not seem to be working properly, run through the checks below to see 
if you can identify and correct the problem. If you are not able to solve the problem, 
please call your dealer or contact a Canon Customer Support help desk for assistance.
The printer has no power.
The compact power adapter 
or power cord is not correctly 
connected.zBe sure that the compact power adapter and power cord 
are connected correctly. Be sure that the power cord is 
plugged into a standard power outlet.
The printer’s power button is blinking red.
There is a malfunction in the 
printer.zTurn the printer’s power off and turn it on again.
The (PictBridge )/ (Canon Direct Print ) icon does not display in the upper left
corner of the LCD monitor.
The cable is not correctly 
connected.zConnect the cable correctly (p. 31).
The printer’s power is off.zTurn the printer’s power on (p. 31).
Your camera’s firmware is 
incompatible with this printer.zPlease check the Canon BeBit website (http://
web.canon.jp/Imaging/BeBit-e.html), or your regional 
Canon website, for information or to download compatible 
firmware.
Printing from the memory 
card is in progress or printing 
connected to a computer is 
in progress.zWait until the print outputted.
The printer does not print.
The printer is not correctly 
connected to the camera.zConnect the cable correctly (p. 31). If the connection is 
correct, the   or   icon will appear on the camera’s 
LCD monitor.
The camera’s batteries are 
depleted.zReplace with fully charged battery pack or a fresh 
batteries, or plug the camera into a power outlet (using the 
camera’s optional compact power adapter).
The ink cassette is not 
loaded correctly.zLoad the ink cassette correctly (p. 27).
Too much slack in the ink 
cassette’s ink sheet.zTake up the slack (p. 27).
The paper cassette is not 
pushed all the way in.zLoad the paper cassette correctly (p. 29).
The printer has overheated.zWait for the printer to cool down.