Canon printer PIXMA SELPHY CP710 User Manual

							
9
NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS 
SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT 
BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY 
INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF 
IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM 
NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND 
EXCLUSIONS MAY NOT APPLY TO YOU.
5. TERM:  This Agreement is effective upon your using the SOFTWARE and remains in effect until 
expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this 
Agreement by destroying the SOFTWARE. This Agreement will also terminate without notice to you if 
you fail to comply with any of the terms of this Agreement and you must then promptly return the 
SOFTWARE. In addition, Canon may enforce its other legal rights.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), 
consisting of “commercial computer software” and “commercial computer software documentation,” as 
such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 
227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the 
SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-
chome, Ohta-ku, Tokyo 146-8501, Japan.
7. EXPORT RESTRICTIONS:  You agree to comply with all export laws and restrictions and regulations of 
the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of 
any such laws and restrictions and regulations, or without all necessary approvals.
8. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be illegal by any court or 
tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of 
that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and 
effect.
9. CONTROLLING LAW:  The terms of this Agreement as it relates to purchases of the Software in the 
United States of America shall be governed and construed in all respects in accordance with the laws 
and regulations of the State of New York, without reference to choice of law principles. The terms of this 
Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the 
province of Ontario.
10. OWNERSHIP:  All rights, including but not limited to copyrights and trade secret rights, to the 
SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the 
SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright 
and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its 
affiliated corporations and third party licensors under such laws. You only own the CD-ROM media in 
which the Software is stored. Except as expressly provided herein, no license or right, express or 
implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon. Nothing 
contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, 
graphics or textual material that you save in connection with the Software.
You may not modify, remove or delete any or all copyright notices (i) which are contained in the 
Software, including any copy thereof, and (ii) which are on the original CD-ROM and on the medium of 
a back-up copy made pursuant to Section 2 above.
11. ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE  READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND 
CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE 
STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT 
MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL 
OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO 
THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE 
EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON.  
						

							
10
About This Guide
„Symbols Used
„About illustrations used in this guide
This guide uses illustrations mainly for the CP710. Unless otherwise mentioned, 
operations are also the same when using the CP510.
„About camera descriptions in this guide
General camera descriptions in this guide refer to digital cameras or digital camcorders 
compatible with the compact photo printer (CP710/CP510). However, in detailed 
instructions, “camera” refers to “digital cameras”, and “power source” refers to “compact 
power adapter” throughout this guide.
  : This mark denotes issues that may affect the printer’s operation.
  : This mark denotes additional topics that complement the basic operating 
procedures.
Disclaimer
zWhile every effort has been made to ensure that  the information contained in this guide is 
accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves 
the right to change the specifications of the har dware and software described herein at any time 
without prior notice.
zNo part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, 
or translated into any language in any form, by any means, without the prior written permission 
of Canon.
zCanon makes no warranties for damages resulting from corrupted or lost data due to a 
mistaken operation or malfunction of the camera, the printer, the software, the CompactFlashTM 
cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.
zAdobe is a trademark of Adobe Systems Incorporated.
zMacintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc., registered in 
the United States and other countries.
zMicrosoft® and Windows® are either registered trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.
zCompactFlash is a trademark of SanDisk Corporation.
zMEMORY STICK, Memory Stick PRO, MEMORY STICK Duo and Memory Stick Pro Duo 
are trademarks of Sony Corporation.
zMultiMedia Card is a trademark of Infineon Technologies AG.
zxD-Picture Card is a trademark of Fuji Photo Film Co., Ltd.
zSD Memory Card and miniSD Card are trademarks of SD Association.
zBluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and is licensed to Canon Inc.
zOther names and products not mentioned above may be registered trademarks or 
trademarks of their respective companies.  
						

							
11
zBefore using the devices, please ensure that you have read and understood the safety 
precautions described below. Always ensure that the devices are operated correctly.
zThe safety precautions noted on the following pages are intended to instruct you in the safe 
and correct operation of the devices to prevent injuries or damage to yourself and other 
persons.
Devices: Printer, Compact power adapter
Battery: Battery pack(sold separately)
Safety Precautions
 WARNINGS
Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-
ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the 
speakers. It is also possible to suffer from hearing loss from listening with headphones 
to the loud sounds of a CD-ROM played on a music CD player.
Devices
zDo not disassemble or modify the devices.
zIf the devices are dropped or the casing becomes damaged, do not continue operation.
zIf the devices emit smoke or a burning odor, or show other signs of significant 
malfunction, immediately unplug the power cord from the power outlet.
zNever rest liquid containers on top of the devices. If the exterior comes into contact with 
liquids or salt air, wipe it dry with a soft, absorbent cloth.
zDo not drop or insert metallic or combustible objects into the devices.
Continued use of the equipment may result in fire or electric shock. Immediately turn the 
printer power off and remove the printer battery or unplug the power cord from the power 
outlet. Please consult your camera distributor or the closest Canon Customer Support Help 
Desk.
zDo not touch metal parts of the devices or the power plug during thunderstorms.
Lightning strikes may produce lethal voltages within the devices. Keep clear of the devices 
while thunderstorms are in progress.
zDo not use flammable solvents such as alcohol, benzene, or paint thinner to clean the 
devices.
Continued use of the equipment may result in fire or electric shock.  
						

							
12
Power
zDo not exceed the cable and power outlet ratings when operating this product. Do not 
operate this product outside of the specified voltage rating. Check that the voltage of the 
outlet is compatible with the devices before plugging them in.
zIf the power cord becomes damaged (if internal wiring is exposed, etc.), immediately 
unplug it from the power outlet.
zBe sure that the power cord is plugged all the way in.
zDo not damage, modify, or rest heavy objects on the power cord.
zUse only recommended power sources.
zRemove the power cord on a regular periodic basis and wipe away the dust and dirt that 
collects on the plug, the exterior of the power outlet and the surrounding area.
zDo not handle the power cord if your hands are wet.
Continued use of the equipment may result in fire or electric shock.
Battery (sold separately)
zDo not place the battery pack near a heat source or expose it to direct flame or heat.
zThe battery pack should not be immersed in water.
zDo not attempt to disassemble, alter or apply heat to the battery pack.
zAvoid dropping or subjecting the battery pack to severe impacts that could damage the 
casing.
zUse only recommended battery pack and accessories.
Use of a battery pack not expressly recommended for this equipment may cause 
explosions or leaks, resulting in fire, injury and damage to the surroundings. In the event 
that a battery leaks and the eyes, mouth, skin or clothing contact these leaked substances, 
immediately flush with water.
zDo not place anything, such as tablecloths, carpets, bedding or cushions, on top of the 
battery charger while it is charging.
Heat will build up and could result in a fire.
zBefore you discard a battery, cover the terminals with tape or other insulators to prevent 
direct contact with other objects.
Contact with the metallic components of other materials in waste containers may lead to 
fire or explosions.
Usage Location
zDo not place the devices on an unstable or tilted table or desk.
There is risk that the devices may fall and cause injury.  
						

							
13
 CAUTIONS
Devices
zDo not block the air vents on the printer.
zDo not rest heavy objects on the devices.
zDo not reach into internal parts of the devices except as specified in the operating 
instructions.
Such conditions could lead to injury, fire, electric shock or other damage.
zUnplug the devices when you are not using them.
Leaving the devices plugged in during prolonged periods of non-use poses risk of electric 
shock or fire.
zDo not remove the paper cassette from the printer while printing is in progress.
Paper moves back and for th in the cassette four times during printing. Placing your hand in 
the way of moving paper may result in injury.
Power
zDo not move the devices while they are plugged in.
zDo not excessively bend or twist the power cord.
zDo not pull on the power cord.
Doing so may damage the power cord. Continued use of a damaged cord poses risk of fire, 
electric shock or equipment failure.
Usage Location
zDo not use the devices in locations that are smoky, humid, dusty, or subject to strong 
vibration.
zDo not leave the devices in places subject to strong sunlight or close to heating 
equipment, such as the dashboard or trunk (boot) of a car.
The abovementioned can cause leakage, overheating or explosion, resulting in fire, burns 
or other injuries. High temperatures may also cause deformation of the casing.
zDo not use the devices near an open flame.
Sheets ejected from the printer (onto the top of the paper cassette) may fall into the flame, 
resulting in fire.
zDo not use the devices close to TV sets or AM radios.
Devices’ operation may adversely affect TV and radio reception.  
						

							
14
Proper Usage and Handling
Usage Location
zLeave about 15 cm (6 in.) of clearance at the front and back of the devices and 10 cm (4 
in.) of clearance on both sides.
Be sure to leave clearance around the paper-handling slot (at the rear) so that paper has 
sufficient room to jut out from the slot during printing.
zDo not use near strong magnets or near devices that produce strong electromagnetic 
fields.
Electromagnetic radiation from devices such as TVs and game machines, and strong 
magnetic fields from devices such as speakers and large motors, may cause distortion in 
printed images.
When Not In Use
zAttach the included dust cover to the rear of the printer.
If dirt or foreign objects enter the printer, print quality may deteriorate.
zUnplug the power cord from the outlet. If using the battery pack, remove it.
But please note that you should plug in and run the printer at least once every six months 
to ensure that it remains functional.
When Planning Not to Use for an Extended Period
zWhen the printer is not in use, please remove the ink and paper cassettes from the 
printer and store them.
Close the paper cassette’s top cover and store the paper cassette. Remove unused paper 
from the paper cassette, return it to the bag and then into its original package. Store the 
package horizontally.
Before Transporting
zBefore transporting the printer, remove the paper and ink cassettes, close the paper 
cassette cover and the ink cassette cover, and attach the dust cover to the rear of the 
printer.
If dirt or foreign objects enter the printer, print quality may deteriorate.
zPack the printer into an appropriate case for transport.
If a case is not available, wrap it with cloth or other protective material to protect against 
scratches.
Avoid Condensation Related Problems
zYou can avoid condensation by placing the devices (printer, ink cassette, paper 
cassette, paper) in an airtight, resealable plastic bag and letting them adjust to 
temperature changes slowly before removing them from the bag.
Moving the devices rapidly between hot and cold temperatures may cause condensation 
(water droplets) to form on their external and internal surfaces.  
						

							
15
If condensation Forms Inside the Devices
zStop using the devices immediately.
Continued use may damage the equipment.
Printer: Wait until the water droplets have evaporated completely before resuming use.
Ink cassette, paper cassette, paper: Wipe off the water droplets and allow to return to 
room temperature before resuming use.
Printer
zPlease avoid turning the printer’s power on and off needlessly as the printer 
initialization consumes ink.
There may not be enough ink left for the allotted sheets in the set.
zNever use volatile compounds or insecticides on the printer, and do not allow rubber or 
vinyl material to remain in prolonged contact with the printer.
These materials may cause deformation of the printer’s casing.
zIf the printer overheats, it will temporarily stop operating. This does not mean that the 
printer has malfunctioned.
The printer will resume normal printing as soon as it cools down.
Temporary stoppages are most likely to occur in the following cases:
 When printing continuously.
 If the room is unusually warm.
 If the air vents on the back of the printer are blocked or if ventilation is inadequate.
Ink Cassettes
zPlease use only the ink cassettes specified for use by Canon.
zDo not open the ink cassette cover while printing is in progress, and do not pull the ink 
cassette out.
These actions may damage the printer.
zDo not touch or pull on the ink sheet.
There may not be enough ink left for the allotted sheets in the set.
zDo not handle the ink cassettes with wet or sweaty hands.
Paper Cassettes
zDo not apply excessive force to the paper 
cassette
.
Force or impact on the cassette may result in 
paper jams or equipment damage.
zDo not bend or deform the spring located at the 
rear of the middle cover of the paper cassette.
zDo not place any foreign objects in the print 
output receptacle (on the top of the paper 
cassette).
This area is for paper only.
Spring  
						

							
16
Paper
zPlease use only the paper types specified for use by Canon.
zPaper must be printed on the glossy side (the side without any printed markings).
Always load paper into the cassette with the glossy side up. Loading the paper the wrong 
way may result in poor print quality, and in some cases may cause damage to the printer.
zDo not tear or bend the paper’s perforated edges before printing.
Tearing the paper’s perforated edges will cause the ink sheet to wind up automatically and 
waste one print’s worth of ink. If this happens, there will not be enough ink left to print all 
the paper sheets included in the kit.
zDo not use label sheets on which labels are partially peeled off.
zDo not touch the print side of the paper with 
your fingers.
Always hold the paper along the edges (outside 
the perforated border).
Be sure that hands are dry before touching the 
paper. Sharp objects will scratch the paper 
surface. Keep the paper surface free from 
fingerprints, dust, water droplets, etc.
zDo not write on the paper before printing.
Writing on paper before printing on it may result in malfunction.
zDo not touch the paper while it is being printed.
During printing, the sheet repeatedly moves back and for th along the top of the paper 
cassette and in and out through the paper-handling slot. Please do not touch the sheet 
during this process as this could damage the printer.
zDo not allow too many prints to accumulate in the print output receptacle.
Do not allow more than 9 sheets to accumulate in the print output receptacle.
zYou may write on the paper with an oil-based pen, but to avoid smudging please allow 
ink time to dry before touching it.
zPlease avoid the following actions as they may result in color change, color fading or 
color bleeding.
 Sticking any type of adhesive tape onto the print surface.
 Allowing print surfaces to come into contact with vinyl materials.
 Applying alcohol or other volatile solvents to the print surface.
 Leaving print surfaces tightly pressed against any other surfaces or objects for prolonged periods.
Prints
zIf you wish to mount prints into an album, select an album with nylon-based sleeves, or 
with propylene or cellophane sleeves.
Other types of sleeves may cause color loss or color bleeding.
zTo avoid print quality deterioration, do not store your prints in the following types of 
locations.
 Locations that reach temperatures above 40 °C (104 °F)
 Humid or dusty locations
 Locations exposed to direct sunlight.
zColor change may occur over time in accordance with conditions of storage. Canon 
assumes no liability for color changes.
WRONG RIGHT  
						

							
17
Battery (sold separately)
zDo not carry or store the battery pack with metal objects with sharp edges, such as 
paper clips and pins. Always put the terminal cover on the battery pack’s terminal when 
carrying it or before storing it.
zRemove the battery pack when the printer is not in use.
The battery pack continues to discharge a small amount when left in the printer even with 
the power turned off. This shortens the battery life.
zThe printer consumes the battery charge when the power is on even when a function is 
not being used. To conserve the battery charge, be particularly attentive in turning the 
power off.
zAlthough the battery pack’s maximum operating range is 5 to 40 °C (41 to 104 °F), the 
optimal range is 10 to 30 °C (50 to 86 °F).
At cold temperatures, such as those experienced on ski hills, performance will temporarily 
decline, reducing the usable time.
zIf the battery status is low, the finished print may not be ejected into the print output 
receptacle completely.
If this happens, gently pull out the paper.
zWhen the printer is not in use, remove the battery pack, replace its terminal cover and 
store it in a cool place (30 °C/86 °F or less).
Charge it before using it again.
Charging the Battery (sold separately)
zThis is a lithium ion battery pack so there is no need to completely use or discharge it 
before recharging.
It can be charged at any charge state.
zIt takes approximately 150 minutes to bring a fully discharged battery pack to a full 
charge state (based on standard Canon testing criteria).
 Charge it within a temperature range of 5 to 40 °C (41 to 104 °F).
 The charging time varies according to the ambient temperature and charge state.
 The charge adapter may emit noises while charging. This is not a malfunction.
 Do not charge the battery pack for more than 24 continuous hours to avoid performance loss.
zYou are advised to charge the battery on the day of use, or one day before, to ensure a 
full charge.
Even charged battery packs continue to discharge naturally. 
zStoring a fully charged battery pack for long periods of time (about 1 year) can shorten 
its lifecycle or affect performance.
You are recommended to discharge the battery pack fully in the printer before storing it.
zIf you do not use the battery pack for long periods of time, charge it fully and discharge 
it fully in the printer at least once a year before returning it to storage.
zIf the usable time of a battery pack diminishes substantially even when fully charged,
it should be replaced.  
						

							
18
Read This First
Package Contents
In addition to the printer, the package contains the following accessories.
*1For information about how to use the cleaner stick, refer to Cleaning the Printer (p. 57).*2This cover prevents dust from entering the printer. When the printer is not in use, 
always attach it as shown in the figure.
*3Not included in some regions.
Paper Cassette(Postcard size) Standard Paper
(Postcard size, 5 sheets) Ink Cassette
(Postcard size,  for 5 sheets)
Compact Power Adapter  CA-CP200
Power Cord CP Printer Solution Disk
Cleaner Stick*1
Dust Cover*2
 User Guide (This Guide)
 Warranty Card*3
 Canon Customer Support Leaflet*3