Canon printer PIXMA SELPHY CP1200 User Manual

							21
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Printing ID Photos
Images can be printed for use in photo identification. Choose from the 
following three sizes.
[Custom]Specify the length of the long and short sides, and then 
print.
[Standard] Print a photo that complies with the international ICAO 
standard.
[Dual] Print two sizes: 50x50 mm (approx. 2.0x2.0 in.) and 
45x35 mm (approx. 1.8x1.4 in.).
zzWith [Custom] and [Standard], two different images can be printed on 
each sheet.
zzThe photo may not be accepted as an official ID photo, depending on 
the intended purpose. For details, contact the institution that requires\
 the 
photo.
1 Specify ID photo printing.
zzPress the  button.
zzPress the  buttons to select [ID 
Photo], and then press the  button.
2 Specify the finished size of
 the 
photo.
zzPress the  buttons to specify 
how the size is determined.
zz[Custom]: Press the  buttons 
to select [Long Side], and then press the 
 buttons to specify the length. 
Specify the [Short Side] length, and then 
press the  button again. Note 
that options available for [Short Side] 
are automatically updated based on the 
[Long Side] length.
zz[Standard] or [Dual]: Check the indicated 
image size and press the < o> button.
3 Choose an image to print.
zzPress the  buttons to select an 
image, and then press the < u> button. 
 is shown in the lower right (up to two 
images with [Custom] and [Standard], 
only one image with [Dual]).
zzTo specify the cropping area ( =  20), 
press the EDIT button.
zzPrint as described in step 6 of “Printing 
Images (Select & Print)” (=  14).
zzSettings are cleared after printing.  
						

							22
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
2 Select sizes for display.
zzTo remove a size from the list, press the 
 buttons to select the 
size, and then press the  button.
zzThe check mark () is cleared, and the 
size will no longer be listed on the [ID 
Photo Settings] screen (=
  21). To 
include a size in the list, press the < o> 
button again to select the size, displaying 
.
zzPressing the EDIT button clears all . 
When no sizes are selected, pressing the 
EDIT button selects all sizes, displaying 
.
zzOnce you have selected the sizes to 
include in the list, press the < v> button.
• A warning message is displayed if you press the < v> button when no sizes 
are selected. Press the  button to return to the [Sizes] screen. Select at 
least one size to list, and then press the < v> button. 
• Card-size paper cannot be used.
•  [Borders] settings are not applied, and dates and file number are not printed.
•
 
Selecting two images in step 3 will produce an equal number of prints of\
 each 
image per sheet, in your specified layout. Note that for layouts with an odd 
number of prints per sheet, the center frame on the sheet will be blank.\
•

 
The settings in the ID Photo Settings screen ( =  21) are retained even when 
SELPHY is turned off.
•
 
Y

ou can set the ID Photo Settings screen (=
  21) to display when SELPHY 
is turned on or a memory card is inserted ( =  31).
•
 Marks are printed in the four corners of each printed image as a guide f\
or 
cutting out the photo.
Filtering Candidate Image Sizes
Many image size options are listed when you select [ID Photo]  ►
 [Size 
Selection]  ►
 [Custom]. To simplify size selection, you can edit the list to 
show only sizes used most often.
1 Access the setting screen.
zzOn the ID photo settings screen, choose 
[Size Selection]  ►
 [Custom] (=  21), 
and then press the EDIT button.  
						

							23
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Cropping Images
zzTwo cropping guide lines are displayed 
when you access the crop frame 
(=
  20) when [Standard] or [Dual] size 
is selected in [ID Photo].
zzWhen [Standard] is selected, to print 
a photo that conforms to passport 
standards for face size and position, 
adjust the crop frame so that one line is 
above the head and the other is below 
the chin.
zzWhen [Dual] is selected, two frames 
with differing sizes are displayed 
simultaneously.
• For specific requirements other than face size and position, contact the 
institution that requires the photo.
Selecting and Printing Images from 
Histor y (Reprint)
Images printed from Select & Print (=  14) remain in the history. Images 
can be selected from the print history and printed.
1 Access the print history .
zzPress the  button.
zzPress the  buttons to select 
[Reprint], and then press the  
button.
2 Choose an image.
zzPreviously printed images, Page Layout 
and paper cassette are displayed as 
history information.
zzPress the  buttons to select the 
image you want to print, and then press 
the  button.
3 Choose the  number of copies to 
print.
zzChoose the number of copies and print 
as described in steps 3 and 4 of “Printing 
All Images” (=
  19).  
						

							24
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
• SELPHY can store up to 10 items in the print history.
• History information settings cannot be changed for printing.
•
 
Follow the steps below to erase the history
 .
- Remove the memory card
-  T urn off SELPHY
• The print history is not stored when [   Shuffle] or [  Index] is 
selected in Page Layout ( =  26).
•
 The print history is not stored when printing in progress is canceled.
•
 
Printing is not available when a paper cassette or ink cassette that 
dif

fers from that in the history information is inserted.
Adjusting Settings
You can enhance images in several ways before printing. Add the shooting 
date, adjust colors, and more. Settings apply to all images, so there is\
 no 
need to adjust each image individually.
Configurable Items Description
Print Finish (=
  25) Choose the surface finish of prints.
Borders (=
  26) Print images with or without a border.
Page Layout ( =
  26)Choose the number of images per sheet.
Image Optimize (=
  28) Automatically corrects the brightness and contrast 
according to the image.
Brightness (=
  28) Adjust image brightness in a range of –3 to +3.
Color Adjustment  (=
  28) Adjust the color tone by adjusting the RBCY colors in a 
range of 0 to 3.
My Colors (=
  29) Choose special color tones to make prints look 
distinctive, or choose sepia or black-and-white prints.
Smooth Skin (=
  29) Make skin appear smooth and beautiful.
Correct Red-Eye ( =
  29)Correct images affected by red-eye.
Date (=
  30) Add camera shooting dates when you print.
Date Format (=
  30) Adjust the date format.
File Number ( =
  31)Add the file number when you print.
ID Photo Priority (=
  31) Set the ID Photo Settings screen to be the default 
display.
Keep Print Settings 
(=
  32) Retain the [Borders] and [Page Layout] settings even 
after SELPHY is turned off.
Auto Power Down ( =
  32)Specify automatic power-off when the printer is idle.
Language ( =
  12) Change the language of menus and messages.  
						

							25
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Configuring Settings
1 Access the setting screen.
zzPress the  button.
zzPress the  buttons to select 
[Change Settings], and then press the 
 button.
2 Select an item and adjust the 
setting.
zzPress the  buttons to select an 
item.
zzPress the  buttons to adjust the 
settings, and then press the  button 
to confirm your choice.
3 Access the image display 
screen.
zzPress the  buttons to select 
[Select & Print], and then press the 
 button.
zzSee =  25 – 32 for details on each 
feature.
4 Print.
zzSelect the images and the number of 
copies (=  14), and then press the 
 button to print.
Choosing the Finish (Print Finish)
[ Glossy]
Example of finish
[ Pattern 1] [ Pattern 2][ Pattern 3]
zzBy adding a subtle texture to the surface of prints, you can create a le\
ss 
glossy finish.
 Glossy (default) Prints with a glossy surface finish.
 Pattern 1
Applies a slightly rough surface pattern, for a less glossy finish.
 Pattern 2Applies a fine surface pattern, for a less glossy finish.
 Pattern 3Applies a fine grid-like surface pattern, for a less glossy finish.  
						

							26
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
• The surface finish may not be as expected depending on SELPHY’s 
internal temperature when you turn it on. Before turning on SELPHY  
and printing, wait until it has adjusted to an ambient temperature of 
10 – 35 °C (50 – 95 °F).
• Turning off SELPHY will restore the default setting of [  Glossy].
Printing with a Border around Images 
(Borders)
zzPrint images with or without a border.
zz Borderless (default) /  Bordered
• Turning off SELPHY will restore the default setting of  [  Borderless]. You can have SELPHY retain configured settings 
(=  32).
Choosing a Layout (Page Layout)
zzChoose the number of images per sheet. Your specified quantity of prints 
(=  14) will be printed in the configured layout.
zzWith Color Ink / Label Set KC-18IL (8 Labels per Page, =  2), specify 
[  8-up].
 1-up (default) One image per sheet  
2-up (Fixed Size)Two card size images are 
printed on one sheet
 2-up Two images per 
sheet IndexMany small, uniform size 
images per sheet
 4-up Four images per 
sheet ShuffleImages in a variety of 
sizes on a single sheet
 8-up
Eight images per 
sheet  
						

							27
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
• Turning off SELPHY will restore the default setting of [  1-up]. You can have 
SELPHY retain configured settings ( =  32).
•
 The position of images cannot be specified.
•
 
Depending on the configured layout, images may not be printed with the 
settings in [Date] (

=
  30), [File Number] (=  31), [Image Optimize] 
(=  28), [Correct Red-Eye] (=  29), [Borders] (=  26), or [Smooth Skin] 
(=  29).
•
 Carrying out [Print  All Images] (=  19) with [  Index] selected, allows you 
to print all images on the memory card as an index.
Combining Images of Various Sizes (Shuffle)
zzUse the shuffle feature to have images arranged automatically in a 
variety of sizes.
zzGroups of up to 8 or 20 images can be printed on a single sheet.
zzEither L or postcard-size paper ( =  2) can be used for printing.
zzOn the screen in step 2 of “Configuring 
Settings” (=  25), press the  
buttons to select [Page Layout]. Press the 
 buttons to select [ 
 Shuffle], 
and then press the  button.
zzOn the screen at left, press the  
buttons to select an item.
zzPress the  buttons to adjust the 
settings, and then press the  button 
to confirm your choice.
• The position of images cannot be specified.
•  It may take some time before printing begins.
Printing Two Card Size Images on One Sheet (2-up 
(Fixed Size))
zzTwo card sized images can be printed in  2-up  orientation on one L or 
postcard-size paper ( =  2).
zzOn the screen in step 2 of “Configuring 
Settings” (=  25), press the  
buttons to select [Page Layout]. Press 
the  buttons to select [
  2-up 
(Fixed Size)], and then press the  
button.
zzOn the screen at left, press the  
buttons to select an item.
zzPress the  buttons to adjust the 
setting, and then press the  button 
to confirm your choice.  
						

							28
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
• When [Bordered] is selected in [Borders] (=  26), [Off] can be 
selected in [Center].
•
 
When printing an image that has a 4:3 or more elongated aspect 
ratio, the printed image layout is the same even if [Of

f] is selected 
for [Center].
• Marks are printed in the four corners of each printed image as a guide f\
or 
cutting out the photo.
Optimal Prints with Auto Correction (Image 
Optimize)
zzAutomatically corrects the brightness and contrast according to the 
image.
zz On (default) /  Off
• Some images may not be adjusted correctly .
• Turning off SELPHY will restore the default setting of [  On].
•
 When [  Index] is selected in [Page Layout] (=  26), [Image Optimize] is 
not applied.
•
 
The degree of correction may vary depending on layout and paper size.
Adjusting the Brightness
zzAdjust image brightness in a range of –3 to +3.
zzChoose larger positive values to make images brighter, or larger negative 
values to make them darker.
• Turning off SELPHY will restore the default setting of [±0].
Adjusting the Color Tone (Color Adjustment)
zzAdjust the color tone by adjusting the RBCY colors in a range of 0 to 3.
zzOn the screen in step 2 of “Configuring 
Settings” (=  25), press the  
buttons to select [Color Adjustment], and 
then press the  button.
zzPress the  buttons 
to select the values, and then press the 
 button to confirm your choice.
• Turning off SELPHY will restore the default setting of [0,0].  
						

							29
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Reducing the Appearance of  Red-Eye 
(Correct Red-Eye)
zzCorrect images affected by red-eye.
zz Off (default) /  On
• Red-eye correction may mistakenly be applied to areas of the image 
other than the affected eyes. To avoid this, select [  On] only for 
images affected by red-eye.
• Turning off SELPHY or removing the memory card will restore the default 
setting of [  Off].
•
 Red-eye may not be detected or corrected well on faces covering a very l\
arge/
small area of 
the screen, on bright/dark faces, in shots from the side of or at an 
angle to the face, or when part of the face is not visible.
•
 
Red-eye correction is not applied when [Page Layout] ( =  26) is set to 
[  2-up], [  4-up], [  8-up] or [  Index].
•
 Similarly
, red-eye correction is not applied when [My Colors] ( =  29) is set to 
[  Sepia] or [  B/W].
•
 The degree of correction may vary depending on cropping, page layout, an\
d 
paper size.
Adjusting the Color Tone (My Colors)
zzChoose special color tones to make prints look distinctive, or choose 
sepia or black-and-white prints.
 Off (default) – PositiveFilmSaturated, natural 
colors, as produced 
with positive film
 VividVivid prints with greater 
contrast and color 
saturation Sepia
Sepia-tone
 NeutralSubdued prints with 
less contrast and color 
saturation B/W
Black and white
• Turning off SELPHY will restore the default setting of [  Off].
•
 Some color options may prevent red-eye correction ( =  29).
Making Skin Look Smooth (Smooth Skin)
zzMake skin appear smooth and beautiful.
zz Off (default) /  On
• Correction may be applied to image areas other than skin in some 
cases, and results may not be as expected.
• The default setting of [  Off] is restored after printing, when SELPHY is 
turned off, or when a memory card is removed.
•
 
When [  Index] is selected in [Page Layout] ( =  26), [Smooth Skin] is not 
applied.  
						

							30
Cover
Contents
Part Names
Basic Operations
Printing via USB 
Cable
Troubleshooting
Appendix
Printing via Wi-Fi
Print Settings
Changing How the Date Is Displayed 
(Date Format)
08/08/20152015/08/08
zzWhen adding the date (=  30), adjust the date format as needed.
zzmm/dd/yyyy (default), dd/mm/yyyy, or yyyy/mm/dd
• The setting is retained even when SELPHY  is turned off or memory cards are 
removed.
Printing with the Date (Date)
08/08/2015
zzAdd camera shooting dates when you print.
zz Off (default) /  Prominent / Subtle
• To prevent two instances of the date on images already labeled by  the camera, select [  Off].
• Turning off SELPHY will restore the default setting of [  Off].
•
 The date added to prints cannot be changed, because it is the date assig\
ned 
by the camera when the photos were taken.
•
 
T

o change how the date displays, adjust [Date Format] ( =
  30).
•
 Dates are not printed when [Page Layout] ( =  26) is set to [  Shuffle].
•
 Dates are not printed when [ID Photo] ( =  21) is selected.
•
 Dates may not be printed depending on the aspect ratio of the image, pri\
nting 
orientation or paper size.
•
 
When Date is set to [On] in DPOF Print ( =  54), [Prominent] settings are 
applied even if the SELPHY settings are [Off].
•
 
[Subtle] printing may not be available even if [
  
 Subtle] is selected depending 
on the aspect ratio of the image, printing orientation or paper size.
•
 
If [Subtle] printing is not available even when [

 
 Subtle] is selected when 
Date is set to [On] in DPOF Print ( =  54), the image will be printed using 
[
  Prominent].