Home > Canon > Printer > Canon printer PIXMA SELPHY CP1200 User Manual

Canon printer PIXMA SELPHY CP1200 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA SELPHY CP1200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    Installing and Plugging in SELPHY
    1 Choose the right place to put 
    SELPHY.
    zzPlace the printer on a table or other 
    flat, stable surface. Never place the 
    printer on an unstable or tilted surface.
    zzKeep the printer away from sources 
    of electromagnetism or strong 
    magnetism.
    zzLeave at least 10 cm (4 in.) of open 
    space around the printer.
    zzLeave more open space behind the 
    printer than the length of paper used, 
    so that the paper can pass in and out 
    of the printer freely when printing.
    2 Plug the ada pter cord into 
    SELPHY.
    zzInsert the adapter plug fully into the 
    power inlet on SELPHY.
    3 Connect the power cord.
    zzConnect the power cord to the compact 
    power adapter, and then plug the other 
    end into a power outlet.
    Minimum  
    10 cm (4 in.)
    Minimum 
    10 cm  
    (4 in.)
    More than 
    length of 
    paper
    • Do not use the printer near motors or other devices that generate 
    strong magnetic fields, or in dusty environments. 
    This may damage 
    the printer or cause malfunction.
    •
     
    Do not place the printer near televisions or radios. 
     This may cause 
    the printer to malfunction.  
    						
    							12
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    Display Language
    Change the language of menus and messages.
    1 Turn on SELPHY.
    zzHold the  button until the screen at 
    left is displayed.
    zzTo turn off SELPHY, hold the  button 
    again until the screen changes.
    Approx. 45°
    2 Raise the screen (LCD monitor).
    zzThe screen can be raised up to 
    approximately 45°. Do not attempt to 
    force the screen up more than this 
    amount, as doing so may damage the 
    printer or cause malfunction.
    3 Access the setting screen.
    zzPress the  button.
    zzPress the  buttons to select 
    [Change Settings], and then press the 
     button.
    4 Access the language setting 
    screen.
    zzPress the  buttons to select  
    [  Language], and then press the 
     button.
    5 Choose a language.
    zzPress the  buttons 
    to select a language, and then press the 
     button.
    zzTo return to the screen in step 2, press 
    the  button twice.  
    						
    							13
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    Supported Cards/Images
    Supported Memor y Cards
    No Adapter RequiredAdapter Required (Sold Separately)
    •
     
    SD Memory Card
    •
    
     
    SDHC Memory Card
    •
    
     
    SDXC Memory Card 
    • miniSD Memory Card
    •  miniSDHC Memory Card • microSD Memory Card
    •  microSDHC Memory Card
    •
     
    microSDXC Memory Card
    • For memory cards that require an adapter , always insert the card 
    into the adapter before inserting the adapter into the card slot.  
    If you mistakenly insert the memory card into the card slot without 
    an adapter, you may not be able to remove the card from the printer.
    •
     
    Use a memory card formatted with the device you shot the photos 
    with. Images on cards formatted with a computer may not be 
    recognized.
    • For instructions, refer to the memory card or adapter user manual.
    USB Flash Drives
    You can print images on USB flash drives (sold separately) by inserting the 
    drive into the USB port on SELPHY (=  16).
    Supported Images
    JPEG images conforming to the Exif standard can be printed with SELPHY .
    • Images may not be displayed or printed correctly depending on their size\
     or if 
    they have been edited on a computer
    .  
    						
    							14
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    Printing Images (Select & Print)
    Select images and specify the number of copies as follows. Here, printing 
    from an SD memory card is described as an example, but you can print 
    from other memory cards with the same steps.
    1 Turn on SELPHY.
    zzHold the  button until the screen at 
    left is displayed.
    zzTo turn off SELPHY, hold the  button 
    again until the screen changes.
    2 Raise the screen (LCD monitor).
    zzThe screen can be raised up to 
    approximately 45°. Do not attempt to 
    force the screen up more than this 
    amount, as doing so may damage the 
    printer or cause malfunction.
    3 Insert the memory card into the 
    slot.
    zzInsert the memory card facing as shown 
    until it clicks into place.
    zzTo remove the card, push it in until it 
    clicks, and then slowly release it.
    zzThe image display screen used in the 
    next step is displayed (=  6).
    Approx. 45°
    Label side
    4 Choose an image.
    zzPress the  buttons to select an 
    image to print.
    zzTo jump forward or back by five images, 
    hold down the < l> buttons.
    5 Choose the number of copies.
    zzPress the  buttons to specify 
    the number of prints.
    zzTo increase or decrease the quantity by 
    five copies, hold down the < u> 
    buttons.
    zzTo print other images at the same time, 
    repeat steps 4 – 5.
    6 Print.
    zzPress the  button to start printing.
    zzWhile printing, paper passes in and out 
    of the back of SELPHY several times. 
    Do not touch the paper until printing is 
    finished and the print is ejected onto the 
    paper cassette.
    zzDo not allow 19 or more prints to 
    collect in the ejection area on the paper 
    cassette.
    zzTo cancel printing in progress, always 
    press the  button.
    Copies of current imageTotal prints  
    						
    							15
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    7 Add more paper as needed.
    zzIf a message indicates that the paper 
    has run out, remove the paper cassette 
    without turning off the power.
    zzAdd more paper to the cassette (=  9) 
    and reinsert the cassette in SELPHY 
    (=
      10).
    8 Change the  ink cassette as 
    needed.
    zzIf a message indicates that the ink 
    has run out, open the ink cassette 
    compartment cover without turning off the 
    power.
    zzTo remove the ink cassette, move the 
    lock in the direction shown. Insert a new 
    ink cassette (=
      8, 10).
    • Never pull out the paper cassette, open the ink cassette 
    compartment cover
    , or remove a memory card while printing or 
    when you hear printer operation sounds immediately after it has 
    been turned on. This may damage the printer.
    •
     
    T
     o cancel printing in progress, always press the < v> button. 
    Printing cannot be canceled by pressing the < q> button, and 
    unplugging the printer may damage it.
    • Image display in step 4 may take some time when memory cards contain 
    many images.
    •
     
    If a message indicates that DPOF images remain, see “Printing Using C\
    amera 
    Settings (DPOF Print)” (
    
    =
      54).
    •
     Y
    ou can specify up to 99 images in step 4 and up to 99 copies per image in 
    step 5. However, the total number of prints cannot exceed 999.
    •
     
    Even if you press the <
    
    v> button to cancel printing, the printer will continue 
    printing until the current sheet is finished.
    Avoiding Left Over Paper
    Note the following to prevent wasted paper, which occurs if ink is consumed 
    faster than the paper.
    •
     
    Do not turn the sprocket too much when removing slack from the ink 
    sheet (
    
    =
      8).
    •
     
    T
    
    o cancel printing in progress, always press the < v> button; after 
    pressing the < v> button, never turn off the power before SELPHY is 
    finished printing (step 6).
    •
     
    If a message indicates that the paper has run out, add paper without 
    turning of
    
    f the printer or removing the ink cassette (step 7). Otherwise, 
    press the  button to cancel printing (step 6).
    Note that under some conditions, even if you follow these instructions, \
    ink 
    may be consumed faster than the paper, leaving you with excess paper.  
    						
    							16
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    Printing from USB Flash Drives
    Images on USB flash drives (sold separately) can be printed the same way 
    as images on memory cards.
    zzRemove any inserted memory cards.
    zzInsert a USB flash drive as shown.
    zzAfter this, all steps are the same as for 
    printing images from memory cards 
    (=
      14 – 15).
    • Some USB flash drives may be more difficult than others to insert and remove, 
    and some may not work as expected.
    •
     
    For instructions, refer to the flash drive user manual.
    Making One Print from a Selected Image
    For a convenient way to make a single print of a selected image, follow \
    these steps.
    zzChoose an image as described in steps 
    1 – 4 of “Printing Images (Select & Print)” 
    (=
      14).
    zzPress the  button for a single print 
    of the selected image.
    • A single print is not produced this way if you follow steps 4 – 5 in  “Printing Images (Select & Print)” (=  14) to choose images and 
    the number of copies. To use this method for individual prints, make 
    sure the number of copies is [0] in step 4 on  =
      14 beforehand.
    Storing Prints
    • To remove any extra paper from the 
    edges of a print, fold the paper along the 
    perforations and tear the edges off.
    •
     
    When writing on prints, use an oil-based 
    pen.
    •
    
     
    T
     o prevent discoloration, do not store 
    prints where temperatures exceed 40 °C 
    (104 °F), in humid or dusty places, or in 
    direct sunlight.
    •
     
    Also avoid the following actions, which may cause discoloration, fading,\
     
    or bleeding: sticking tape on the printed surface, allowing the printed \
    surface to contact vinyl or plastic, applying alcohol or volatile solven\
    ts to 
    the printed surface, or leaving the printed surface pressed firmly against 
    other surfaces or objects over extended periods.
    •
    
     
    When storing prints in an album, choose an album with photo covers 
    made of nylon, polypropylene, or cellophane.
    • Color may change over time or depending on storage conditions. 
    Canon cannot be held liable for discoloration.  
    						
    							17
    Cover
    Contents
    Part Names
    Print Settings
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Basic Operations
    After Printing
     Turn off SELPHY (=  12) and remove any memory cards or USB 
    flash drives.
     Lower the screen for storage.
     Unplug the power cord from the outle t and disconnect the adapter plug 
    from SELPHY.
    •
     
    If the compact power adapter is still warm, wait for it to cool down 
    before putting it away
    
    .
     Remove the paper cassette and clos e the paper cassette compartment 
    cover. Leave any remaining paper in the cassette, and store the 
    cassette in a dark, cool, and dry place away from dust.
    •
     
    Leave the ink cassette in SELPHY
     .
    •
     
    Store SELPHY
      on a flat surface, away from sunlight and dust. Any 
    dust that gets inside SELPHY may cause white banding on photos 
    or damage the printer.
    • Store any extra ink cassettes in the original package or a bag, away 
    from sunlight and dust.
    •
     
    Store any unused paper or ink cassettes in their unopened 
    packages, away from sunlight.   
    						
    							18
    Cover
    Contents
    Part Names
    Basic Operations
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Print Settings
    Print Settings
    Explore a variety of printing features in this chapter, such as cropping images, preparing ID 
    photos, and enhancing images.
    Printing All Images .................................................................................. 19
    Cropping Images
     ....
     ................................................................................. 20
    Printing ID Photos
     
    
    ................................................................................... 21
    Cropping Images ........................................................................\
    .....................23Selecting and Printing Images from History (Reprint)  ........................23
    Adjusting Settings
     ...
     ............................................................................... 24
    Configuring Settings ........................................................................\
    ................ 25
    Choosing the Finish (Print Finish)  ................................................................... 25
    Printing with a Border around Images (Borders)
     
    
    .............................................26
    Choosing a Layout (Page Layout)
     ...
    
    ................................................................ 26
    Optimal Prints with Auto Correction (Image Optimize)
     
    
    ....................................28Adjusting the Brightness
     
    
    ........................................................................\
    .........
    28
    Adjusting the Color Tone (Color Adjustment)   ..................................................
    28
    Adjusting the Color Tone (My Colors)
     
     .............................................................
    29
    Making Skin Look Smooth (Smooth Skin)
     
     .......................................................
    29
    Reducing the Appearance of Red-Eye (Correct Red-Eye) ..............................29
    Printing with the Date (Date)
     
     ........................................................................\
    ...
    30
    Changing How the Date Is Displayed (Date Format)
     
     ......................................
    30
    Adding the File Number when Printing (File Number) ... ..................................
    31
    Using ID Photo Printing by Priority (ID Photo Priority)  ....................................31
    Using the Same Borders and Page Layout Settings 
    after Turning off the Power (Keep Print Settings)
      ............................................32
    Saving Energy (Auto Power Down)
     ...
    
    ..............................................................32  
    						
    							19
    Cover
    Contents
    Part Names
    Basic Operations
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Print Settings
    Printing All Images
    Print all images on a memory card at once as follows.
    1 Access the menu.
    zzPress the  button.
    2 Access the setting screen.
    zzPress the  buttons to select 
    [Print All Images], and then press the 
     button.
    3 Choose the number of copies.
    zzPress the  buttons to specify 
    the number of copies.
    zzTo increase or decrease the quantity by 
    five copies, hold down the < u> 
    buttons.
    4 Print.
    zzPress the  button to start printing.
    zzTo cancel printing, press the  button.
    • If the memory card contains more than 999 images, the 999 most recent 
    images are printed, as determined by shooting date.
    •
     
    Y
     ou can specify up to 99 prints in step 3. However, the total number of copies 
    cannot exceed 999.  
    (For example, you can specify up to nine prints of each image if the ca\
    rd 
    contains 100 images.)
    Copies of 
    current image
    Total prints
    Number of images 
    on card  
    						
    							20
    Cover
    Contents
    Part Names
    Basic Operations
    Printing via USB 
    Cable
    Troubleshooting
    Appendix
    Printing via Wi-Fi
    Print Settings
    Cropping Images
    Print only selected areas of an image as follows.
    1 Access the cropping screen.
    zzChoose an image as described in step 
    4 of “Printing Images (Select & Print)” 
    (=
      14), press the EDIT button, and 
    then press the  button.
    zzA crop frame is displayed, showing the 
    image area that will be cropped.
    2 Adjust the im age area to crop.
    zzTo switch the crop frame between portrait 
    and landscape orientation, press the 
    EDIT button.
    zzTo move the crop frame, press the 
     buttons.
    zzTo enlarge the crop frame, press the 
     button, and to reduce it, press the 
     button.
    3 Confirm the setting.
    zzTo confirm the cropping area and return 
    to the image display screen, press the 
     button.
    zzTo crop other images for printing with the 
    first one, repeat steps 1 – 3.
    4 Print.
    zzPrint as described in step 6 of “Printing 
    Images (Select & Print)” (=  14).
    zzAfter printing, crop settings are cleared.
    • To adjust the cropping area once you have set it, press the EDIT button on the 
    image display screen, press the < u> buttons to select [Adjust Cropping], 
    and then press the  button. Repeat steps 2 – 3.
    •
     
    T
     o cancel cropping after you have set the cropping area, press the EDIT button 
    on the image display screen, press the < u> buttons to select [Reset 
    Cropping], press the < o> button to access the reset cropping screen, and 
    then press the  button again.
    •
     
    Cropping areas you have set are cleared if you turn of
     f SELPHY or remove the 
    memory card before printing.
    •
     
    Y
     ou can specify cropping for up to 99 images at once.
    •
     
    Cropping is not available when printing with [Print 
     All Images], [Reprint] 
    or [DPOF Print] or when [Page Layout] (=
      26) is set to [  Index] or 
    [  Shuffle].
    •
     The cropping aspect ratio indicated by the frame displayed on images can\
    not 
    be adjusted.
    •
     
    T
    
    o change the number of copies, press the < u> buttons on the image 
    display screen in step 3. Note that specifying zero copies will not clea\
    r 
    cropping settings.  
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA SELPHY CP1200 User Manual