Canon printer PIXMA MX7600 User Manual

77
Faxing
Sending Faxes
„ Flow of Sending Faxes
The operation flow of sending faxes is as follows.
Step 1
Load the original to send on t he Platen Glass or in the ADF.
See “Handling the Original Document” on page 16.
Step 2
Adjust the image quality ( Fax resolution) and density (Scan contrast ).
See “Adjusting the Image Quality (Fax resolution) ” on page 78 and “Adjusting the Density (Scan 
contrast)” on page 78.
Step 3
Dial using the speed dial.
Step 4
Send faxes.
z Using the Platen Glass  
(1) Press...

78Faxing
„Before Sending Faxes
zAdjusting the Image Quality (Fax resolution)
You can adjust the image quality (fax resolution) of the original you send. The higher you set the 
image quality setting, the better the output quality will be at the other end, but the longer it will 
take for the transmission. Adjust the image quality according to the type of original you are 
sending.
1Press the FA X button, then press the FAX Quality button.
2Use the { or } button to select FAX resolution.
3Use the [ or ]...

79
Faxing
„ Sending Faxes
This section describes methods of sending  faxes and dialing functions of the machine.
z Sending a Fax using the Numeric Buttons
z Sending a Fax after Speaking on Telephone
z Sending a Fax using the Speed Dial
z Sending Same Documents to Severa l Recipients (Sequential Broadcasting)
zPreparing for Faxing
1Turn on the machine.
2Load the original on the Platen Glass or in the ADF.
3Press the  FA X button.
Confirm that the  FA X button is lit and the FAX  standby screen is...

80Faxing
(2)Press the same button as you pressed in step 2.
(3) Repeat the procedure from steps (1) to (2) to scan all pages of the document.
(4) Press the  OK button.
The machine starts sending.
z When the document was loaded in the ADF:
The machine scans the document  automatically and starts sending.
zSending a Fax after Speaking on Telephone
Send a fax manually after speaking on telephone if  you want to speak to the recipient before 
sending a fax, or if the recipient does not have  a fax machine...

81 Faxing
6Hang up the handset.
zDialing with using the telephone connecting to the machine 
1Lift the handset of the telephone connecting to the machine.
2Use the telephone to dial the recipient’s fax/telephone number.
3Speak to the recipient.
4Ask the recipient to operate the recipient’s fax machine to receive faxes.
5When you hear a high-pitched signal, press the Color button for color sending, or 
the Black button for black & white sending.
6Hang up the handset.
Important
Color sending is available...

82Faxing
zSending a Fax using the Speed Dial
Registering fax or telephone numbers in s peed dials enables you to send faxes easily.
1Dial the recipient’s number.
zTo send using the one-touch speed dial:  
Press the  One-Touch Speed Dial  button (01 to 08) assigned the number you want to dial.
z To send using the coded speed dial:  
Press the  Coded Dial  button, use the Numeric buttons or the  {, } , [ , or  ] button to enter 
the two-digit code (00 to 99) assigned the number you want to dial, then press...

83
Faxing
1Enter the recipients’ numbers one by one using the Numeric buttons or speed dial.
z When using One-touch speed dial:  
Press the  One-Touch Speed Dial  button (01 to 08) assigned the number you want to dial.
z When using Coded speed dial:  
Press the  Coded Dial  button, use the Numeric buttons or the  {, } , [ , or  ] button to 
enter the two-digit code (00 to 99) assigned the number you want to dial, then press the  OK 
button.
z When using regular dialing:  
Use the Numeric buttons to enter...

84Faxing
„Resending Faxes (Redialing a Busy Number)
There are two methods of redialing: Ma nual redialing and Automatic redialing. 
zAutomatic Redialing
When sending a document and the re cipient’s line is busy, the machine will redial the number 
after a specified interval. Automa tic redialing is enabled by default.
You can customize the following automatic redialing settings:
z Whether or not your machine redials automatically
z The number of times the machine redials (1 to 10 times)
z The time...

85 Faxing
Using Useful Sending Functions
„Using the Information Services
You can use many information services such as banks, airline reservations, or hotel 
reservations. These services require tone dialing for their services, so that you need to 
temporarily switch to tone dialing if your machine is connected to a rotary pulse line.
zUsing the Touch Tone Line
zUsing the Hook Button 
1Press the FA X button.
2Press the Hook button.
3Use the Numeric buttons to dial the number of the information service....

86Faxing
3Use the Numeric buttons to dial the number of the information service.
4When the recorded message for the information service answers, press the To n e 
( ) button to switch to tone dialing.
5Use the Numeric buttons to press the number by following the message.
6Press the Hook button to finish using the service.
zUsing the Telephone Connecting to the Machine 
1Press the FA X button.
2Lift the handset of the telephone.
3Use the telephone to dial the information service.
4When the recorded...