Canon printer PIXMA MX490 User Manual

1403Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
931 

1485Cause
Appropriate ink cartridge is not installed.
Action Printing cannot be executed because the ink cartridge is not compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
932 

1682Cause
The FINE cartridge cannot be recognized.
Action Replace the FINE cartridge.
If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
933 

1684Cause
The ink cartridge cannot be recognized.
Action Printing cannot be executed because the ink cartridge may not be installed properly or may not be
compatible with this machine.
Install the appropriate ink cartridge.
If you want to cancel printing, press the machine's  Stop button.
934 

1686Cause
The ink may have run out.
Action The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly
detected.
If you want to continue printing without this function, press the machine's  Stop button for at least 5
seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of
printing under the ink out...

1688Cause
The ink has run out.
Action
Replace the ink cartridge and close the paper output cover.
If printing is in progress and you want to continue printing, press the machine's  Stop button for at least 5
seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is not
satisfactory, if printing is...

168ACauseThe FINE cartridge is not installed properly, or the FINE cartridge not compatible with this machine isinstalled.
Action Open the paper output cover, then remove the FINE cartridges.
Make sure that the FINE cartridge compatible with the machine is installed. Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
When the FINE cartridge is installed properly, you hear an electric sound once.
After installing, close the paper output cover.
937 

1702Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
938 

1703Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
939 

1704Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.
940