Canon printer PIXMA MP800R User Manual

Chapter 8 99Scanning Images
(2)Use [ ] and [ ] to select the computer you want to use, then press [OK].
The scan process selection screen is displayed.
4Select the scan operation.
(1)Use [ ] or [ ] to select the scan operation, then press [OK].
Scan standby screen is displayed.
Note
zComputers connected over a wireless or wired LAN are displayed on the LCD of the 
machine when the following conditions are met.
– Canon IJ Network Scan Utility is installed on the computer.
– The machine you want to use is...

100Chapter 8Scanning Images
5Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
„Scanning from an Application Software
You can scan an image from a TWAIN- or WIA-* compliant application software and handle the 
scanned image in the application software. For detailed operations, refer to the Scan Guide.
* WIA is only available via a USB connection to a Windows XP operating system.
Important
If with some types of original the position and size...

Chapter 9
Chapter 9 101Reading from and Writing to a Memory Card
Reading from and Writing to a Memory 
Card
Setting up the Card Slot as the Memory Card Drive of 
the Computer
The machine’s Card Slot can also be used as a memory card drive of a computer over a wireless or 
wired LAN as well as over a USB connection. However, you cannot write to a memory card over a 
network. To write files to a memory card, you need to connect the computer to the machine with a 
USB cable.
The Card Slot must be mounted to...

102Chapter 9Reading from and Writing to a Memory Card
1Display the Read/write attribute screen.
(1)Ensure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. See “Inserting the Memory Card” 
on page 49.
(2)Press [Menu].
(3)Use [ ] or [ ] to select  and then press [OK].
(4)Use [ ] or [ ] to select  and then press [OK].
(5)Use [ ] or [ ] to select  and then press [OK].
(6)Use [ ] or [ ] to select  and then press [OK].
2Specify the Read/write attribute.
(1)Use [ ] or [...

Chapter 10
Chapter 10 103Changing the Machine Settings
Changing the Machine Settings
This section describes the procedure to change the settings in the Device settings screen, taking the 
steps to specify Extended copy amount as an example.
1Press [ON/OFF] to turn on the machine. 
See “Turning the Machine ON and OFF” on page 18.
2Press [Menu].
3Display the Device settings screen.
(1)Use [ ] or [ ] to select , then press [OK].
The Maintenance/settings screen is displayed.
(2)Use [ ] or [ ] to select ,...

104Chapter 10Changing the Machine Settings
(2)Use [ ] or [ ] to select the menu, then press [OK].
Example: select .
5Change the settings.
(1)Use [ ] or [ ] to select the setting item, then press [OK].
Example: select .
The Print Settings
„Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
„Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
„Extended copy amount
Selects the amount of image that extends off the paper when...

Chapter 10 105Changing the Machine Settings
Wireless Print Settings - Infrared/Bluetooth 
Communication
You can change the settings for wireless print through infrared communication with a mobile phone 
and the machine.
You cannot use these settings to change the print settings for the machine using a computer over a 
wireless LAN.
For details, see “Setting the Page Size, Media Type, and Layout When Printing from a Mobile 
Phone” on page 84.
„Page size
Specifies the page size for printing photos saved on...

106Chapter 10Changing the Machine Settings
LAN settings
For details on how to set LAN settings, refer to “Printing Out Network Setting Information” and 
“Initializing Network Settings” of “Printing and Initializing Network Settings” in the Setup Guide.
„Reset LAN settings
Restores the machine’s LAN settings to the factory default.
„Print LAN details
Prints out the information of the machine’s network settings. For details on the network setting 
information, refer to “Printing Out Network Setting...

Chapter 10 107Changing the Machine Settings
„Slide show setting
Specifies the image display quality of the slide show.
Language selection
Changes the language for LCD messages.
Reset setting
You can change the settings back to the default, except for the language for LCD messages, the 
position of the Print Head and LAN settings. 
Save settings
Saves the settings for the Settings screen.
Load settings
Loads the settings for the Settings screen that were saved.
Note
When  is selected, images are displayed...

Chapter 11
108Chapter 11Routine Maintenance
Routine Maintenance
Replacing an Ink Tank
When ink runs out, replace the ink tank. The machine will not print if the wrong type of ink tank is 
used, or if it is installed in the incorrect position.
The machine uses the following ink tanks.
Getting the Ink Level Information
You can check the ink tank status by the ink tank lamp display. Open the Scanning Unit (Printer 
Cover) of the machine and check the ink tank lamp.
When the ink level is low:
The ink tank...