Canon printer PIXMA mini260 User Manual

59 Troubleshooting
Note
Adjusting the Print Head ManuallyIf the Automatic Print Head Alignment does not work or if you wish to adjust the print heads manually, 
follow the procedure below.
1. Press the ON/OFF button to turn on the printer, and then load two sheets of supplied paper or 
Canon genuine 4 x 6/101.6 x 152.4 mm paper* in the Auto Sheet Feeder.
* Use the following papers.
zMatte Photo Paper
zPhoto Paper Pro
zPhoto Paper Plus Glossy
2. Press the HOME button.
3. Select Settings and then press the...

60Troubleshooting
LCD Cannot Be Seen at all
An Unintended Language Is Displayed on the LCD
CauseAction
Cannot see the display on the 
LCD.
zIf the POWER lamp on the Operation Panel is off
The printer is not powered on. Connect the power cord and press 
the 
ON/OFF button. The printer will power on and the LCD will 
display a message.
zIf the POWER lamp is lit
On the Operation Panel, press the OK button.
CauseAction
The language you want to be 
displayed is not selectedSelect the language you want to be...

61 Troubleshooting
Cannot Install the Printer Driver
CauseAction
Unable to proceed beyond the 
Printer Connection screen.If you were unable to proceed beyond the Printer Connection 
screen, follow the procedure below to reinstall the printer driver.
(1)Click Cancel on the Printer Connection screen.
(2)Click Start Over on the Installation Failure screen.
(3)Click Back on the screen that appears next.
(4)Click Exit on the Welcome screen, then remove the CD-
ROM.
(5)Turn the printer off.
(6)Restart the...

62Troubleshooting
Cannot Connect to Computer Properly

63 Troubleshooting
Print Results Not Satisfactory

64Troubleshooting

65 Troubleshooting

66Troubleshooting

67 Troubleshooting
Paper Does Not Feed Properly
CauseAction
Printing on inappropriate type of 
paper.Check to see if the paper you are printing on is not too thick or 
curled.
See “Paper Handling” on page 11.
Paper Feed Rollers are dirty. If paper is not feeding properly, clean the Paper Feed Rollers. 
Cleaning the Paper Feed Rollers will wear the rollers, so perform 
this procedure only when necessary.
For details on cleaning, see “Cleaning the Roller (Roller 
Cleaning)” of the User’s Guide on-screen...

68Troubleshooting
Paper Jams
CauseAction
Paper jammed in the Paper 
Output Slot or the Auto Sheet 
Feeder.Remove the paper following the procedure below.
(1)Slowly pull the paper out, either from the Auto Sheet Feeder 
or from the Paper Output Slot, whichever is easier.
zIf the paper tears and a piece remains inside the printer, open the 
Printer Cover and remove it.
After removing all paper, close the Printer Cover, turn the printer 
off, and turn it back on.
Be careful not to touch the components...