Canon printer PIXMA mini260 User Manual

39 Printing Photographs from a Wireless Communication Device
Performing Bluetooth Communication
This section explains the procedure to print photos through Bluetooth communication from the 
mobile phone or the PDA with the optional Bluetooth unit BU-20. 

40Printing Photographs from a Wireless Communication Device
2Attach the Bluetooth unit BU-20 to the printer.
3Set the printing paper and layout. 
See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a 
PDA” on page 36.
4Start printing from a mobile phone or a PDA.
zWhen you select the device name, select the initial value “Canon mini260-1”.
zIf you are required to enter the passkey, enter the initial value “0000”.
You can change the device name of the printer or passkey...

41 Printing Photographs from a Wireless Communication Device

42Printing Maintenance
Printing Maintenance
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink tank, the Print 
Head Nozzles are probably clogged. Follow the procedures below to clean the nozzles.
If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact 
your Canon Service representative.
Note
Before performing maintenance
zOpen the Printer Cover and make sure that the ink lamp is...

43 Printing Maintenance

44Printing Maintenance

45 Printing Maintenance

46Printing Maintenance
„Aligning the Print Head
If print quality is poor, adjust the Print Head position. It may solve the problem.
1Prepare to print.
(1) Turn on the printer.
See “Turning On the Printer” on page 10.
(2) Load two sheets of supplied paper or Canon genuine 4×6/101.6×152.4mm paper in the 
Auto Sheet Feeder.
2Print the Pattern.
(1)Display the  Settings screen.
(2) Select  Maintenance  and then press the  OK button.
(4) Confirm a message on the LCD, select  Ye s. and then press the  OK...

47 Printing Maintenance
Replacing an Ink Tank
When replacing an ink tank, check the model number very carefully.
The printer will not print properly if the wrong ink tank is used.
zInk Tank:   CLI-36 Color

48Printing Maintenance
If an empty ink tank is displayed distinctly
zInk has run out. Replace the ink tank.
Printing under the current condition may damage the printer.
zIf you want to continue printing in this condition, you need to 
release the function for detecting the remaining ink level. Press 
and hold the Stop/Reset button for at least 5 seconds, and then 
release it.
* With this operation, releasing the function for detecting the remaining ink level is memorized. 
Please be advised that Canon...