Canon printer PIXMA MG6620 User Manual

•MP Drivers is installed•
Network settings of your scanner or printer is completed after installing the MP Drivers
•
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network Communication" for
your model from Home of the  Online Manual.
751 

Selecting a Response to Commands from the Operation Panel
Using IJ Scan Utility
IJ Scan Utility allows you to specify how to respond when scanning from the operation panel.
Note
•
The screens for scanning with Auto Scan from the operation panel are used as examples in thefollowing descriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box appears.
3.
Select a scan mode on the  (Scanning from the Operation Panel) tab.
752 

Note•
Refer to the following for details.
Settings (Save to PC (Auto)) Dialog Box
Settings (Save to PC (Photo)) Dialog Box
Settings (Save to PC (Document)) Dialog Box
Settings (Attach to E-mail (Photo)) Dialog Box
Settings (Attach to E-mail (Document)) Dialog Box
4.
Set Scan Options .
5.
Specify the file name and other settings in  Save Settings.
753 

6.
Select the application you want to start after scanning in Application Settings.
7.
Click OK.
754 

The responses will be executed according to the specified settings when you start scanning from theoperation panel.
755 

Troubleshooting
The Machine Cannot Be Powered On
Printing Does Not Start
Paper Does Not Feed Properly/"No Paper" Error Occurs
Print Results Not Satisfactory
Ink Is Not Ejected
Paper Jams
If an Error Occurs
Search Each Function
Problems with Network Communication
Problems with Printing
Problems with Printing Quality
Problems with Scanning
Problems with the Machine
Problems with Installation/Downloading
About Errors/Messages Displayed
If You Cannot Resolve the Problem
756 

Problems with Network Communication
Problems with the Machine While Using with Network
Cannot Detect a Machine on a Network
Other Problems with Network
757 

Problems with the Machine While Using with Network
The Machine Stopped Working Suddenly
Ink Remaining Level Is Not Displayed on Printer Status Monitor of the Machine
Printing Speed Is Slow
Cannot Use the Card Slot via Network
Cannot Use the Machine on Replacing an Access Point or Changing Its settings
758 

The Machine Stopped Working Suddenly
Cannot Communicate with the Machine After the Network Settings Are Changed
Cannot Communicate with the Machine over the Wireless LAN
Cannot Communicate with the Machine Using the Access Point Mode
Cannot Print, Scan, or Access the Card Slot from a Computer Connected to the NetworkCannot Communicate with the Machine After the Network Settings AreChanged
It may take a while for the computer to obtain the IP address, or you may need to restart your computer. Search for...

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.
Check9  Make sure that the channel confirmed in Check 8 can communicate with the
computer.
If not, change the channel set to the access point.
Check10  Make sure that the firewall of the security software is disabled.
If the firewall function of your security...