Canon printer PIXMA MG6620 User Manual

C.Tap to display how to load the original.D.
Tap to display the screen to select the destination.
4.
Load the original on the platen glass.
5.
Press the Color button for color scanning, or the  Black button for black & white scanning.
Note
•
When you forward the scanned data to the computer using WSD, press the  Color button.
•
If you select  JPEG or TIFF  for Format  on the scan setting screen:
The machine starts scanning and scanned data is forwarded to the computer.
•
When you select  PDF or Compact...

If you want to scan originals with advanced settings, or if you want to editor print the scanned images:
If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the
scanned images, such as optimizing or trimming.
In addition, you can edit or print the scanned images using the compatible application software to make
better use of them.
Scanning Photos and Documents
Note
•
You can use a WIA-compliant application software and the Control Panel (Windows XP only) to...

Attaching the Scanned Data to E-mail Using the Operation Panel of
the Machine
Before attaching scanned data to an e-mail, confirm the following:•
MP Drivers are installed.
If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our
website.
•
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the...

4.Tap the computer to forward the scanned data.
Tap  Local (USB)  for a USB-connected computer, or tap the computer to forward the scanned data for a
network-connected computer.
The Scan standby screen is displayed.
5.
Specify the settings as necessary.
A.
Tap to select the document type.
Document Scans the original on the platen glass as a document data applying the settings specified in
Scan settings .
Photo Scans the original on the platen glass as a photo data applying the settings specified in...

The confirmation screen asking you if you continue scanning is displayed after scanning iscomplete.
If you continue scanning, load the original on the platen glass and start scanning.
If you do not continue scanning, tap  End. The scanned data is forwarded to the computer.
Scanned data is forwarded to the computer and attached to an e-mail according to the settings specified
in Canon IJ Scan Utility.
For the settings or how to send an e-mail, refer to the mail software's instruction manual.
Remove...

Setting Items for Scanning Using the Operation Panel of the
Machine
You can change the scan settings such as the scan size, resolution, or data format.When the Scan standby screen is displayed, tap  Settings to select the setting item. Flick to display setting
items, then tap the setting item to display the settings. Tap to specify the setting.
Note
•
The scan setting cannot be specified under the following conditions:
•
When  Auto scan  is selected for  Doc.type to forward the scanned data to the...

3.Scan res (Scan resolution)
Select the resolution for scanning.4.
Preview
This setting is not available.
5.
Reduce show-thru  (Reducing show-through)
Characters on the back may show through when scanning a thin document such as a newspaper. Select ON  if characters seem to show through on the scanned document.
This setting item is not available when  Photo is selected for  Doc.type.
6.
Descreen
A printout consists of minute dots to make characters or graphs. Interfering with each dot may result in...

Network Scan SettingsYou can connect your scanner or printer to a network to share it among multiple computers or scan images
into a specified computer.
Important
•
Multiple users cannot scan at the same time.
Note
•
Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or by following the instructions on the web page.
•
With network connection, scanning takes longer than USB connection.
Complete the following settings to enable scanning over a network.
Specifying Your...

The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screenappears. In that case, skip ahead to Step 3.2.
In the notification area on the desktop, right-click  (IJ Network Scanner Selector EX),
then select  Settings....
The Scan-from-PC Settings screen appears.
3.
Select your scanner or printer from  Scanners.
Normally, the MAC address of your scanner or printer is already selected after the network setup. In
that case, you do not need to select it again.
Important
•
If...

Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
Important
•
Set IJ Scan Utility to use your scanner or printer via a network connection beforehand.
Setting for Scanning with IJ Scan Utility
1.
Check that IJ Network Scanner Selector EX is running.
If IJ Network Scanner Selector EX is running, 
 (IJ Network Scanner Selector EX) appears in the
notification area on the desktop. Click 
 to check the hidden icons as well.
Note
•
If the icon is not...