Canon printer PIXMA MG6620 User Manual

Reset settingYou can change the settings back to the default.•
Web service setup only
Reverts the Web service settings back to the default.
•
LAN settings only
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default.
•
Settings only
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending setting only
Reverts only the device information sending settings.
•
Reset all
Reverts all settings you made to the...

About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   ECO settings .
Using the Operation Panel
3.
Tap Two-sided printing setting .
4.
Specify the settings as necessary.
A.
Tap to select...

2.
Flick the HOME screen, then tap  ECO settings .
Using the Operation Panel
3.
Tap Energy saving settings .
4.
Specify the settings as necessary.
A.
Tap to specify the length of time to turn the machine off automatically when no operation is
made or no printing data is sent to the machine.
Note
•
The Auto power off setting is invalid under the following conditions.
•
When using the machine via a network and the network connection is enabled
You can check the connection status from  WLAN setting list in...

About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Quiet setting .
Using the Operation Panel
3.
Tap Use quiet mode .
The confirmation screen is displayed, then the 
 icon appears as the  Quiet setting menu icon.
Activate this setting to reduce the operating noise while printing is in progress....

Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or
access point, or by using the machine as an access point temporarily in an environment that has wireless
LAN router or access point, you can connect the machine to an external device such as a computer or a
smartphone and print/scan from them.
This section describes how to enable the access point mode, the access point name of the machine, and the security...

Note•
Tapping Details displays the security setting.
The password required when connecting from the external device is also displayed.
•
You can specify the access point name (SSID) and the security setting optionally.
Setting of the Access Point Mode
7.
Tap  OK to start the connection.
The access point mode is enabled and the machine can be used as an access point.
Printing/Scanning with the Access Point Mode Print/Scan with the access point mode following the procedure below.
1.
Connect an external...

3.Tap LAN settings .4.
Tap Change LAN .
5.
Tap Wireless LAN active .
If you do not use the machine over wireless LAN, select  Disable LAN.
Setting of the Access Point Mode Specify the settings for the access point mode following the procedure below.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Setup .
Using the Operation Panel
3.
Tap  Device settings .
4.
Tap LAN settings .
5.
Tap Other settings .
6.
Tap Access point mode settings .
The screen to enter the access point...

13.Enter the password (8 to 10 characters).14.
Tap OK to finish entering the password.
15.
Tap  OK to finish specifying the password setting.
Note
•
If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
258 

Setting Up the Card Slot as the Memory Card Drive of the
Computer
Setting Up the Card Slot as the Memory Card Drive of the Computer
259 

Setting Up the Card Slot as the Memory Card Drive of the
Computer
The card slot of the machine can also be used as the memory card drive of the computer.
Note
•
When you use the machine over LAN, the card slot of the machine can be used as the network drive.
Using the Card Slot over a Network
•
You cannot write data to a memory card in the card slot over a network.
Important
•
When  Read/write attribute  in Device user settings  under Device settings  is set to Writable from
USB PC  or Writable from LAN...