Canon printer PIXMA MG5721 User Manual
Have a look at the manual Canon printer PIXMA MG5721 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Use normal-size printingPrint without reducing the page. Use reduced printing Reduce the page slightly during printing. 5. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 6. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 7. Complete the setup Click OK on the Page Setup tab. When you execute print, duplex printing will be started. Performing Duplex Printing Manually You can perform the duplex printing manually. 1. Open the printer driver setup window 2. Set duplex printing Check the Duplex Printing check box and uncheck the Automatic check box on the Page Setup tab. 401
3. Select the layoutSelect Normal-size , Fit-to-Page , Scaled , or Page Layout from the Page Layout list. 4. Specify the side to be stapled The best Stapling Side is selected automatically from the Orientation and Page Layout settings. To change the setting, select another stapling side from the list. 5. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 6. Complete the setup Click OK on the Page Setup tab. When you execute print, the document is first printed on one side of a sheet of paper. After one side is printed, reload the paper correctly according to the message.Then click Start Printing to print the opposite side. Important
Related Topic Changing the Printer Operation Mode403
Stamp/Background PrintingStamp or Background may be unavailable when certain printer drivers or operating environments are used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data. The procedure for performing stamp/background printing is as follows: Printing a Stamp "CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.1. Open the printer driver setup window 2. Click Stamp/Background... (Stamp... ) on the Page Setup tab The Stamp/Background (Stamp ) dialog box opens. Note
3.Select a stamp Check the Stamp check box, and select the stamp to be used from the list. The current settings are displayed in the settings preview on the left side of the Page Setup tab.4. Set the stamp details If necessary, specify the following settings, and then click OK. Define Stamp... button To change the stamp text, bitmap, or position , click this. Place stamp over text To print the stamp on the front of the document, check this check box. Note
Select Background... buttonTo use another background or change the layout or density of a background , click this. Background first page only To print the background only on the first page, check this check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified background. Important
Registering a StampThis feature may be unavailable when certain printer drivers or operating environments are used. You can create and register a new stamp. You can also change and re-register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time. The procedure for registering a new stamp is as follows: Registering a New Stamp1. Open the printer driver setup window 2. Click Stamp/Background... (Stamp... ) on the Page Setup tab The Stamp/Background (Stamp ) dialog box opens. Note
4. Configure the stamp while viewing the preview window
6.Complete the setup Click OK. The Stamp/Background (Stamp ) dialog box opens again. The registered title appears in the Stamp list. Changing and Registering Some of Stamp Settings1. Select the stamp for which the settings are to be changed Select the Stamp check box in the Stamp/Background (Stamp ) dialog box. Then from the list, select the title of the stamp to be changed. 2. Click Define Stamp... The Stamp Settings dialog box opens. 3. Configure the stamp while viewing the preview window 4. Overwrite save the stamp Click Save overwrite on the Save settings tab. When you want to save the stamp with a different title, type a new title in the Title box and click Save. Click OK when the confirmation message appears. 5. Complete the setup Click OK. The Stamp/Background (Stamp ) dialog box opens again. The registered title appears in the Stamp list. Deleting an Unnecessary Stamp 1. Click Define Stamp... in the Stamp/Background (Stamp ) dialog box The Stamp Settings dialog box opens. 2. Select the stamp to be deleted Select the title of the stamp you want to delete from the Stamps list on the Save settings tab. Then click Delete . Click OK when the confirmation message appears. 3. Complete the setup Click OK. The Stamp/Background (Stamp ) dialog box opens again. 409
Registering Image Data to be Used as a BackgroundThis feature may be unavailable when certain printer drivers or operating environments are used. You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background. An unnecessary background can be deleted. The procedure for registering image data to be used as a background is as follows: Registering New Background1. Open the printer driver setup window 2. Click Stamp/Background... on the Page Setup tab The Stamp/Background dialog box opens. Note