Canon printer PIXMA MG5721 User Manual
Have a look at the manual Canon printer PIXMA MG5721 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The setting is enabled after this. When you want to disable this function, select Disable from the list according to the same procedure. Note
Reducing the Printer NoiseThe silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for using the quiet mode is as follows: Quiet Settings 1. Open the printer driver setup window 2. Click Quiet Settings on the Maintenance tab The Quiet Settings dialog box opens. Note
Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation. The procedure for configuring Custom Settings is as follows: Custom Settings 1. Open the printer driver setup window 2. Make sure that the printer is on, and then click Custom Settings on the Maintenance tab The Custom Settings dialog box opens. Note
Don't detect mismatch of paper settings when printing from computerWhen you print documents from your computer and the paper settings on the printer driver and the cassette paper information registered on the printer do not match, this setting disables the message display and allows you to continue printing. To disable detection of paper setting mismatches, select this check box. Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing.4. Apply the settings Click OK and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter. 245
Changing Settings from Operation Panel Changing Settings from Operation Panel Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Cassette settings Reset setting ECO settings Quiet setting 246
Changing Settings from Operation PanelThis section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.1. Make sure machine is turned on. 2. Select Setup on HOME screen. LCD and Operation Panel 3. Select Device settings and press OK button. The Device settings screen is displayed. 4. Use button to select setting item and press OK button. The setting screen for the selected item is displayed. 5. Use button to select menu and press OK button. 6. Use button to select setting item and press OK button. 247
You can select the setting menus below. Print settings LAN settings Device user settings PictBridge print settings Language selection Firmware update Cassette settings Reset setting Note