Canon printer PIXMA MG5721 User Manual

The setting is enabled after this. When you want to disable this function, select Disable from the list
according to the same procedure.
Note

Reducing the Printer NoiseThe silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
 Quiet Settings
1.
Open the printer driver setup window
2.
Click  Quiet Settings  on the Maintenance  tab
The  Quiet Settings  dialog box opens.
Note

Note

Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation.
The procedure for configuring  Custom Settings is as follows:
 Custom Settings
1.
Open the printer driver setup window
2.
Make sure that the printer is on, and then click  Custom Settings on the Maintenance
tab
The  Custom Settings  dialog box opens.
Note

Don't detect mismatch of paper settings when printing from computerWhen you print documents from your computer and the paper settings on the printer driver and
the cassette paper information registered on the printer do not match, this setting disables the
message display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the...

Changing Settings from Operation Panel
Changing Settings from Operation Panel
Print settings
LAN settings
Device user settings
PictBridge print settings
Language selection
Firmware update
Cassette settings
Reset setting
ECO settings
Quiet setting
246 

Changing Settings from Operation PanelThis section describes the procedure to change the settings in the  Device settings screen, taking the steps
to specify  Extended copy amount  as an example.1.
Make sure machine is turned on.
2.
Select  Setup  on HOME screen.
LCD and Operation Panel
3.
Select  Device settings  and press OK button.
The  Device settings  screen is displayed.
4.
Use  button to select setting item and press  OK button.
The setting screen for the selected item is displayed.
5.
Use  button...

You can select the setting menus below.
Print settings
LAN settings
Device user settings
PictBridge print settings
Language selection
Firmware update
Cassette settings
Reset setting
Note

Print settings

LAN settings