Canon printer PIXMA MG5721 User Manual

EncryptionEncryption methodNone/WEP/TKIP/AESWEP Key LengthWEP key length (bits)Inactive/128/64AuthenticationAuthentication methodNone/auto/open/shared/WPA-PSK/WPA2-PSKSignal StrengthSignal strength0 to 100 [%]TCP/IPv4TCP/IPv4EnableIP AddressIP addressXXX.XXX.XXX.XXXSubnet MaskSubnet maskXXX.XXX.XXX.XXXDefault GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableIP Address *2IP addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXDefault Gateway...

Default Gateway *2Default gatewayXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security method

Network Communication (Windows)
Checking and Changing Network Settings
IJ Network Tool (Network Connection)
IJ Network Tool (Other Screens)
Network Communication Tips
273 

Checking and Changing Network Settings
IJ Network Tool
Changing Settings in Wireless LAN Sheet
Changing WEP Detailed Settings
Changing WPA/WPA2 Detailed Settings
Changing Settings in Wired LAN Sheet
Changing Settings in Admin Password Sheet
Monitoring Wireless Network Status
Changing Settings in Direct Connection
Initializing Network Settings
Viewing Modified Settings
274 

IJ Network ToolIJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed
when the machine is set up.
Important

Changing Settings in Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
Note

Note

Changing WEP Detailed Settings
Note

2.Key Length:
Select either  64bit or 128bit .3.
Key Format:
Select either  ASCII or Hex .
4.
Key ID:
Select the Key ID (index) set to the wireless router.
5.
Authentication:
Select the authentication method to authenticate the printer's access to the wireless router. Normally, select  Auto. If you want to specify the method manually, select  Open System or
Shared Key  according to the setting of the wireless router.
7.
Click OK.
Important

Changing WPA/WPA2 Detailed Settings
Note