Canon printer PIXMA MG3620 User Manual

For more on connecting and setting up a network device, see the device instruction manual or contact itsmanufacturer.
Check7  Make sure wireless signal is strong. Monitor signal status and move machine
and wireless router as necessary.

2.Right-click Wireless Network Connections  icon on notification area of desktop, and then click
View Available Wireless Networks .3.
Select network name on screen that appears, and then click  Connect.
Select "XXXXXX-MGXXXXseries" ("XX" represents alphanumeric characters) as network name.
4.
Enter network key on screen that appears, and then click  Connect.
By default, the serial number of the machine is used as the network key. Check the serial number on the back of the machine.
5.
Use...

Cannot Print or Scan from Network Computer
Check1 Make sure computer network settings are correct.
For more on computer setup, see your computer instruction manual or contact its manufacturer.
Check2  If MP Drivers are not installed, install them.

Network Key Unknown
WEP or WPA/WPA2 Key Set for Access Point Unknown, Cannot Connect
Setting an Encryption Key
WEP or WPA/WPA2 Key Set for Access Point Unknown, Cannot
Connect
For details on setting up a wireless router, see the instruction manual provided with the wireless router or
contact its manufacturer. Make sure your computer can communicate with the wireless router.
Set up the machine to match the wireless router settings using IJ Network Tool.
Setting an Encryption Key
For details on setting up...

If the machine is connected to an AirPort Base Station via a LAN, check the settings in
Wireless Security  of AirPort Utility .

Administrator Password Set for Machine Unknown
Initialize the machine settings.
Initializing Machine Settings
After initializing the machine settings, redo setup.

Machine Cannot Be Used After Replacing Wireless Router or
Changing Its Settings
When you replace a wireless router, redo the network setup for the machine.

With Encryption On, Cannot Communicate with Machine After
Changing Encryption Type at Wireless Router
If you change the encryption type for the machine and it subsequently cannot communicate with the
computer, make sure the encryption type for the computer and the wireless router matches the type set
for the machine.
Cannot Communicate with Machine After Enabling MAC/IP Address Filtering or Encryption Key on
Wireless Router
718 

Printing Is Slow
Check1 Machine may be printing or scanning a large job from another computer.
Check2  Monitor signal status and move machine and wireless router as necessary.

Ink Level Not Shown on Printer Status Monitor (Windows)
Use the printer driver with bidirectional communication.Select  Enable bidirectional support  in the Ports sheet of the properties dialog box of the printer driver.
How to Open the Printer Driver Setup Window
720