Canon printer PIXMA MG2920 white User Manual
Have a look at the manual Canon printer PIXMA MG2920 white User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Aligning the Print Head Position Automatically from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This printer supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the printer is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment . The procedure for performing automatic print head alignment is as follows: Print Head Alignment 1. Open the printer driver setup window 2. Click Print Head Alignment on the Maintenance tab The Start Print Head Alignment dialog box opens. 3. Load paper in the printer Load one sheet of A4 size or Letter size plain paper into the rear tray. Note • The number of sheets to be used differs when you select the manual head alignment. 4. Print head alignment pattern printing Make sure that the printer is on and click Align Print Head. The adjustment pattern is printed. Important • Do not open the cover while printing is in progress. 5. Adjustment pattern scanning After the adjustment pattern is printed, a message is displayed. As instructed in the message, load the adjustment pattern onto the platen, and press the Start button on the printer. Print head alignment starts. Note • To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print Alignment Value . 151
Use Your Computer to Print a Nozzle Check PatternThe nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1. Open the printer driver setup window 2. Click Nozzle Check on the Maintenance tab The Nozzle Check dialog box opens. Click Initial Check Items to display the items that you need to check before printing the nozzle check pattern. 3. Load paper in the printer Load one sheet of A4 size or Letter size plain paper into the rear tray. 4. Print a nozzle check pattern Make sure that the printer is on and click Print Check Pattern. Printing of the nozzle check pattern begins. Click OK when the confirmation message appears. The Pattern Check dialog box opens. 5. Check the print result Check the print result. When the print result is normal, click Exit. If the print result is smudged or if there are any unprinted sections, click Cleaning to clean the print head. Related Topic Cleaning the Print Heads from Your Computer 152
Cleaning Inside the PrinterPerform bottom plate cleaning before you execute duplex printing to prevent smudges on the back side of the paper. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page. The procedure for performing bottom plate cleaning is as follows: Bottom Plate Cleaning 1. Open the printer driver setup window 2. Click Bottom Plate Cleaning on the Maintenance tab The Bottom Plate Cleaning dialog box opens. 3. Load paper in the printer As instructed in the dialog box, fold the A4 size or Letter size plain paper in half horizontally, and then unfold the sheet.Load the paper into the rear tray in the portrait orientation with the crest of the crease facing down. 4. Perform the bottom plate cleaning Make sure that the printer is on and then click Execute. Bottom plate cleaning starts. 153
Cleaning the Machine Cleaning the Exterior of the Machine Cleaning the Platen Glass and Document Cover Cleaning the Paper Feed Roller Cleaning the Inside of the Machine (Bottom Plate Cleaning) 154
Cleaning the Exterior of the MachineBe sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.Smooth out wrinkles on the cloth if necessary before cleaning. Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as notto scratch the surface. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine. 155
Cleaning the Platen Glass and Document Cover Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as notto scratch the surface. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine. With a soft, clean, lint-free and dry cloth, wipe the platen glass (A) and the inner side of the document cover (white sheet) (B) gently. Make sure not to leave any residue, especially on the glass surface. Important • The inner side of the document cover (white sheet) (B) is easily damaged, so wipe it gently. 156
Cleaning the Paper Feed RollerIf the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the market1. Make sure that the power is turned on and remove any paper from the rear tray. 2. Clean the paper feed rollers without paper. 1. Hold down the Stop button until the Alarm lamp flashes seven times, then release it immediately. The paper feed rollers will rotate as it is cleaned. 3. Clean the paper feed rollers with paper. 1. Make sure that the paper feed rollers have stopped rotating, load a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the market in the rear tray. 2. Pull out the paper output tray and the output tray extension. 3. Hold down the Stop button until the Alarm lamp flashes seven times, then release it immediately. The machine starts cleaning. The cleaning will be complete when the paper is ejected. If the problem is not resolved after cleaning the paper feed rollers in the rear tray, turn off the power, unplug the power cord, then wipe the paper feed rollers (the center roller and the right roller) (A) located inside the rear tray with a moistened cotton swab or the like while rotating them manually. Do not touch the rollers with your fingers. Rotate the rollers two or more times. After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again. If the problem is not resolved after cleaning the paper feed rollers, contact the service center. 157
Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1. Make sure that the power is turned on and remove any paper from the rear tray. 2. Prepare paper. 1. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper. 2. Load only this sheet of paper in the rear tray with the open side facing you. 3. Pull out the paper output tray and the output tray extension. 3. Hold down the Stop button until the Alarm lamp flashes eight times, then release it immediately. The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. Note • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper. If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Wipe off any ink from the protrusions using a cotton swab or the like. 158
Important• Be sure to turn off the power and unplug the power cord before cleaning the machine.159
Changing the Machine Settings Changing Machine Settings from Your Computer Initializing the Machine Settings Disabling the Wireless LAN Function of the Machine 160