Canon printer PIXMA MG2920 User Manual

Uninstalling IJ Network ToolFollow the procedure below to uninstall IJ Network Tool from your computer.
Important
•
Even if IJ Network Tool is uninstalled, you can print over network or scan from the computer. However,
you cannot change the network settings over network.
•
Log into a user account with administrator privilege.
1.
Perform the procedure to uninstall IJ Network Tool.
•
In Windows 8.1 or Windows 8:
1.
Select  Control Panel  from the Settings charm on  Desktop > Programs  > Programs and...

About Errors/Messages Displayed
If an Error Occurs
A Message Is Displayed
Error Message Appears on a PictBridge (Wireless LAN) Compliant Device
662 

If an Error OccursWhen an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting
message is displayed automatically. Take the appropriate action described in the message.
When an error occurs, the  Alarm lamp flashes and a Support Code (error number) is displayed on the
computer screen. For some errors, the  ON lamp and the  Alarm lamp flashes alternately. Check the status of
the lamps and the message, then take the appropriate action to resolve the error....

15 flashesThe FINE cartridge cannot be recognized.168216 flashesThe ink has run out.1688
Support Code Corresponding to the Number of Alternate Flashes of the ONLamp and the Alarm Lamp
Example of 2 times flashing:
(A) Flashes
(B) Goes off
Number of flashesCauseSupport Code2 flashesPrinter error has occurred.51007 flashesPrinter error has occurred.5B00 , 5B0110 flashesAn error requiring you to contact the
service center has occurred.B201 , B202 , B203, B204Other cases than abovePrinter error has...

Note•
You can confirm the actions against errors with Support Codes on your computer by searching a
Support Code.
Click Here to Search
For details on how to resolve errors without Support Codes, see 
A Message Is Displayed .
665 

A Message Is DisplayedThis section describes some of the errors or messages.
Note
•
A Support Code (error number) is displayed on the computer for some error or message. For details onerrors with Support Codes, refer to 
Support Code List .
Error Regarding the Power Cord Being Unplugged Is Displayed
Writing Error/Output Error/Communication Error
Other Error Messages
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
Error Regarding the Power Cord Being Unplugged Is Displayed
The...

Note•
When the machine is used over LAN, the port name of the machine is displayed as"CNBJNP_xxxxxxxxxx". "xxxxxxxxxx" is the character string generated from the MAC address or a
character string specified by the user when setting up the machine.
•
If the setting is incorrect:
Reinstall the MP Drivers with the Setup CD-ROM or install them from our website.
•
Printing does not start even though the machine is connected to the computer using a USB cable and the port named "USBnnn"...

•In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound , then Device Manager .•
In Windows XP, click  Control Panel, Performance and Maintenance , System , then click  Device
Manager  on the Hardware  sheet.
2.
Double-click  Universal Serial Bus controllers  then USB Printing Support .
If the  USB Printing Support Properties  screen is not displayed, make sure that the machine is correctly
connected to the computer.
Check3  Make sure that the machine is connected to your computer...

•
If you agree to participate in the survey program:Click  Agree , then follow the on-screen instructions. The printer usage information will be sent via the
Internet. If you have followed the on-screen instructions, the information will be sent automatically from the second time onward and the confirmation screen will not be displayed again.
Note
•
When the information is being sent, a caution screen such as an Internet security screen may bedisplayed. In this case, confirm that the program name is...

Note•
In Windows 8.1, Windows 8, Windows 7, or Windows Vista, a confirmation/warning dialogbox may appear when installing, uninstalling or starting up software.
This dialog box appears when administrative rights are required to perform a task.
If you are logged on to an administrator account, follow the on-screen instructions.
2.
Select  Canon Inkjet Printer/Scanner/Fax Extended Survey Program .
3.
Select Change .
If you select  Yes after you have followed the on-screen instructions, the confirmation...