Canon printer PIXMA iP5200R User Manual

							Appendix87
Specifications
Printer
Maximum resolution (dpi): 9600 (horizontal)* x 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Print speed *
* Print speed will vary depending on system  configuration, software, document complexity, 
print mode and page coverage. Black printing (text pattern)
Max Speed (Custom Setting 5): 30 ppm
Standard: 15.0 ppm
Color printing 
Max Speed (Custom Setting 5): 24 ppm
Standard: 11.7 ppm
Print width: 203.2 mm max. (8.0 inches) (for Borderless Printing: 215.9 mm / 8.5 inches)
Resident print control mode: Canon extended mode
Receive buffer: 42 KB
Interface (USB): USB 2.0 Hi-Speed / Direct Print Port * All operations are not guaranteed for computers standard-equipped with a USB 2.0 Hi-Speed interface.
* Since the USB 2.0 Hi-Speed interface is fully upwardly  compatible with USB Full-Speed (USB 1.1), it can be used at USB 
Full-Speed (USB 1.1).
Wireless LAN Interface (IEEE802.11g/IEEE802.11b)
Wired LAN Interface (RJ-45)
Acoustic noise level: Approx. 34.7 dB (A ) (in the highest print quality mode)
Operating environment: Temperature: 5 to 35°C (41 to 95°F) Humidity: 10 to 90%RH (no condensation)
Storage environment: Temperature: 0 to 40°C (32 to 104°F) Humidity: 5 to 95% RH (no condensation)
Power supply: AC 110-120 V, 50/60 Hz AC 220-240 V, 50/60 Hz
Power consumption: Standby: Approx. 3 W Printing: Approx. 19 W
OFF: Approx. 0.4 W
Dimensions 
(with the Paper Support and Paper Output 
Tray retracted): 444 (W) x 309 (D) x 160 (H) mm
17.4 (W) x 12.1 (D) x 6.4 (H) inches
Weight: 7.5 kg (16.5 lb.)
Print Head: Black (PGI-5BK):  512 nozzles Cyan, Magenta, Yellow, Black (CLI-8BK): 512 x 6 nozzles 
						

							Appendix
88
Network
Protocol TCP/IP
Operating Systems  Windows XP/Windows 2000/Windows Me/Windows 98Mac OS X v.10.2.1 to 10.3.x
Wireless LAN
Supported Networks  IEEE802.11g/IEEE802.11b
Interface  IEEE802.11g/IEEE802.11b Network Interface
Transfer Standard  IEEE802.11g/IEEE802.11b
Access Mode  CSMA/CA
Transmission Method  OFDM/DS-SS
Frequency Bandwidth  2.412 GHz - 2.462 GHz
Wireless Channel  1 to 11
Network Type  Infrastructure
Communication Distance Indoors 50 m** Effective range differs depending on the installation environment and location.
Security  Encryption by WPA-PSK (TKIP/AES), WPA2-PSK* (TKIP/AES),  or WEP (64/128 bits), access control by IP address and 
MAC address filtering, passwords
* When changing the encryption method to WPA2-PSK, the settings must be configured by using Canon iP5200R Network 
Configuration. For details, see “Modifying the Printer Settings 
from a Web Browser” in the 
Network Guide.
Certification  Wi-Fi, TELEC, FCC, IC, ETSI, iDA 
						

							Appendix89
Wired LAN
Supported Networks  100BASE-TX/10BASE-T
Interface  Wired LAN Interface (100BASE-TX/10BASE-T)
Compliant Standard  IEEE802.3u (100BASE-TX)/IEEE802.3 (10BASE-T)
Transfer Speed  10 Mbps/100 Mbps (auto switchable)
Camera Direct Print (Canon Bubble Jet Direct)
Interface Direct Print Port (Connect a iP5200R-compatible digital camera or digital 
video camcorder using the USB cable supplied with the 
camera.)
Compatible digital cameras and digital video 
camcorders iP5200R-compatible digital 
cameras and digital video 
camcorders
Compatible Paper Card #1 (Photo Paper Pro 4 x 6/101.6 x 152.4 mm)  Card #2 (Photo Paper Plus Glossy, Photo Paper Plus Semi-
gloss, or Glossy Photo Paper 4 x 6/101.6 x 152.4 mm)
Card #3 (Photo Paper Plus Glossy 5 x 7/127.0 x 177.8 
mm)
LTR (Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper 
Plus Semi-gloss, or Glossy Photo Paper Letter size) 
A4 (Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper 
Plus Semi-gloss, or Glossy Photo Paper A4 size)
Layout Print Standard: Borderless  / with border, Index Print: 6-80 
images (depending on the size of print media)
Effect Exif2.21 compliant
DPOF Functions Ver. 1.00 compliant (Index print, number of copies, select  images, print special characters (date)) 
						

							Appendix
90
Camera Direct Print (PictBridge)
Paper size Default (Photo Paper Plus Glossy 10 x 15 cm/4 x 6)10 x 15 cm/4 x 6 (Photo Paper Plus Glossy, Photo Paper 
Pro, Photo Paper Plus Semi-gloss, Glossy Photo Paper, 
Photo Stickers
*1)
13 x 18 cm/5 x 7 (Photo Paper Plus Glossy)*2
A4/8.5 x 11 (Photo Paper Plus Glossy A4/Letter, Photo 
Paper Pro A4/Letter, Photo Paper Plus Semi-gloss A4/
Letter, Glossy Photo Paper A4/Letter, Plain Paper A4/
Letter)
5.4 x 8.6 cm/Credit Card (Glossy Photo Paper Card Size)
*1Canon-brand sticker. Printing on this paper is available only 
when the Layout function on your camera has a 16-up option.
See  “Canon Specialty Media ” on page 19.
*2If using a Canon PictBridge-compatible camera, you can select it.
Paper type Default (Photo Paper Plus  Glossy), Photo (Photo Paper Plus 
Glossy, Glossy Photo Paper), Fast Photo (Photo Paper Pro), 
Plain Paper (Only A4/Letter)
Layout Default (Borderless), Borderless, Bordered, N-up (2, 4, 9,  16)
*1, 35-up*2
*1
Layout compatible with Canon-brand sticker above. 
See  “Canon Specialty Media ” on page 19.
*2Photos are printed in 35 mm Film  Style layout (contact printing 
layout). This option can be  selected for Canon PictBridge-
compliant devices only. (Note that this option cannot be used for 
some models.) 
For a Canon PictBridge-compliant device, selecting the item 
displayed with the [i] icon prints the shooting information (Exif 
data) in list format, or in the margins of specified photos. (Note 
that these options cannot be used for some models.) 
Trimming Default (Off: No trimming),  On (follow camera’s setting), Off
Image optimize Default (ExifPrint), On, Off, “VIVID”*, “NR” (Noise  Reduction)*, “VIVID+NR”*, “Face”*
* If using a Canon PictBridge-compatible camera, you can select it.
Date/File No. print Default (Off: No pr inting), Date, File No., Both, Off 
						

							Appendix91
Canon IJ Printer Driver System Requirements
zA computer on which Windows XP, Windows 2000, 
Windows Me or Windows 98 operates.
z USB 2.0 Hi-Speed interface
*1
USB 2.0 Hi-Speed operation can only be guaranteed 
under the environments below.
OS: Windows XP / Windows 2000
USB 2.0 Hi-Speed driver: USB 2.0 driver for Windows
*2
USB 2.0 Hi-Speed interface: a PC and a USB cable that 
comply with USB 2.0 Hi-Speed standard*3
*1
Since the USB 2.0 Hi-Speed interface is fully upwardly 
compatible with USB Full-Speed (USB 1.1), it can be 
used at USB Full-Speed (USB 1.1).
*2Microsoft’s authorized drivers are available through 
Windows Update or Service Pack installation. Any non-
Microsoft USB 2.0 drivers are not guaranteed.
*3All operations are not guaranteed for computers 
standard-equipped with a USB 2.0 Hi-Speed interface.
z USB interface
USB operation can only be guaranteed on a PC with pre-
installed Windows XP, Windows 2000, Windows Me, or 
Windows 98.
z CD-ROM drive
z Available hard-disk space for printer driver installation
Windows XP/Windows 2000: 105 MB
Windows Me/Windows 98: 20 MB
z Canon IJ Status Monitor cannot be used under the 
following conditions:
- When sharing this printer on a network (Windows Me, 
Windows 98)
z A Macintosh series computer equipped with USB interface on 
which Mac OS X v.10.2.1 to 10.3.x operates.
See www.canontechsupport.com for Mac OS update 
compatibility.
z USB 2.0 Hi-Speed interface*
USB 2.0 Hi-Speed operation can only be guaranteed under 
the environments below.
OS: Mac OS X v.10.2.7 to 10.3.x
An internal USB 2.0 Hi-Speed port and a USB cable that 
comply with the USB 2.0 Hi-Speed standard
(USB 2.0 Hi-Speed operation on the expansion board is not 
guaranteed.)
* Since the USB 2.0 Hi-Speed interface is fully upwardly  compatible with USB Full-Speed  (USB 1.1), it can be used at 
USB Full-Speed (USB 1.1).
z USB interface
z CD-ROM drive
z Available hard-disk space for printer driver installation
Mac OS X v.10.2.x to 10.3.x: 105 MB
z The following functions are not supported:
-Manual Duplex Printing
-Photo Optimizer PRO
-Poster Printing
-Fit-to-Page Printing
-Booklet Printing
- Reverse Order Printing (supported with Mac OS X v.10.3.x)
Additional System Requirement for On-screen Manuals
Browser: Windows HTML Help Viewer
Note: Microsoft Internet Explorer 5.0 or later must 
be installed. The on-screen manual may not be 
displayed properly depending on your operating 
system or Internet Explorer version. We 
recommend that you keep your system up to date 
with Windows Update.Browser: Help Viewer
Note: The on-screen manual  may not be displayed 
properly depending on your operating system. We 
recommend that you keep your system up to date.  
						

							Appendix
92
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use 
your printer safely. Do not attempt to use printer in any way not described in this manual. 
You may cause an electric shock, fire or damage the printer if you ignore any of 
these safety precautions.
Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners.
Power supply Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessi vely bend or twist the power cord. 
Do not place heavy objects on the power cord.
Never plug the printer into a power socket that is shared with other 
equipment (extension lead/cord, 2- or 3-way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange no ises around the printer, immediately unplug the 
printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off any dust or 
dirt collected on the plug and the power outlet. If the printer is placed at a 
location exposed to a lot of dust, smoke, or high humidity, the dust 
collected on the plug absorbs moisture and may cause insulation failure 
and fire .
Cleaning the printer Use a damp cloth to clean  the printer. Never use flammable solvents such 
as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical components inside 
the printer, it could cause a fire or electric shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the 
printer.
Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside  the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not 
described in this guide.
Working around the 
printer Do not use flammable sprays near the printer.
This could cause a fire or electric shock if the sp
ray comes into contact with electrical components 
inside the printer. 
						

							Appendix93
You may cause injury or damage the printer if you ignore any of these safety 
precautions.
Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or 
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply Ensure that the area around the power outlet is kept clear at all times so you  can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Never use a power supply source other than the on e rated for the printer in the country where you 
purchased the printer.
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Working around the 
printer Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, 
thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for 
service.
Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and 
damage the printer.
Print heads and ink tanks For safety reasons store Print Heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after printing.
The metal parts may be very hot and could cause burns.
Radio wave interference Since the microwave oven and the wi reless LAN system use the same frequency bandwidth, the 
microwave oven can be the potential source of  interference when the microwave oven is on.
Placing this product close to microwave oven may result in the poor status of radio. 
						

							Appendix
94
Regulatory Information
Color Printer Model: K10253 (Contains FCC ID: AZDK30254)
This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate  radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver. 
z Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment un less otherwise specified in the manual. If such changes or 
modifications should be made, you could be required to stop operation of the equipment.
FCC ID: AZDK30254
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to 
operate the equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Expo sure Statement:
This equipment complies with FCC radiation exposure limits set forth for at uncontrolled equipment. This equipment should be 
installed and operated with minimum distance at least 20cm be tween the radiator and persons body (excluding extremities: 
hands, wrists, feet and legs) and must not be co-located or operated with any other antenna or transmitter.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the 
interference-causing equipment standard entitled “Dig ital Apparatus”, ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioé léctriques applicables aux appareils numériques de Classe B 
prescrites dans la norme sur le matériel brouilleur NM B-003 d’Industrie Canada intitulée . 
						

							Appendix95
CANON U.S.A., INC. LIMITED WARRANTY  --- (USA Only)
The limited warranty set forth below is given by Canon U.S.A. , Inc. (Canon USA) with respect to the new or refurbished 
Canon-brand product (Product) packaged with this limited warranty, when purchased and used in the United States only. 
The Product is warranted against defects in materials and work manship under normal use and service (a) for a period of one 
(1) year from the date of original purchase  when delivered to you in new condition in its original container or (b) for 90 days  
from the date of original purchase for refurbished Products.  Defective parts or a defective Product returned to a Canon USA 
repair facility or a Canon USA Authorized Service Facility (ASF), and proven to be defective upon inspection, will be repaire d, 
exchanged for new or comparable rebuilt parts, or exchanged for a refurbished Product, as determined by the Canon USA 
repair facility or the ASF. Warranty repair or replacement shall not extend the original warranty period of the Product. A date d 
proof of purchase is required at the time of warranty service. A copy of your dated bill of sale will satisfy this requirement.  This 
warranty does not cover any accessories, or any consumables, su ch as paper or ink cartridges, as to which there shall be no 
warranty or replacement. 
This limited warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral equipment 
and software. Canon USA shall have no responsibility for such  items except for compatible Canon brand peripheral equipment 
covered by a separate warranty (Separate Warranty). Repairs  of such Canon brand peripheral equipment shall be governed 
by the terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are 
sold as is and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or 
fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non- 
Canon brand items is given by the ma nufacturer or producer thereof. 
This limited warranty covers all defects encountered in normal  use of the Product and does not apply in the following cases: 
(a) Loss of or damage to the Product due to abuse, neglect, mishandling, improper packaging by you, alteration, accident,  electrical current fluctuations, improper use, failure to follow operating or maintenance instructions in, or 
environmental conditions prescribed in, Canon USAs users  manual or other documentation, or services performed by 
someone other than a Canon USA repair facility or ASF. Without limiting the foregoing, dropping the Product, scratches, 
and abrasions will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the 
users manual or other documentation for the Product. 
(b) Use of parts or supplies (other than those sold by Cano n USA) that cause damage to the Product or cause abnormally 
frequent service calls or service problems. 
(c) If the Product has had its serial number or dating defaced, altered or removed. 
ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PR ODUCT OR CONTAINED ON THE SOFTWARE DISKETTES OR CD-
ROMS ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AN D ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR FOR THE 
PRODUCT, IS SOLD AS IS AND WITHOUT WARRANTY BY CANON USA. THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE 
IS CONTAINED IN THE SOFTWARE MANUFACTURERS LICE NSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY 
LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON USA IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF 
THE SOFTWARE MANUFACTURERS LICENSE AGREEMENT. 
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF  MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 
APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER 
EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE,  GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE 
PRODUCT SHALL BIND CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA SHALL NOT BE LIABLE FOR LOSS OF 
REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR 
CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR  CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR 
INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEO RY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA 
OR ITS ASF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON 
USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHA SE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. 
WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND  LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR 
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE 
PRODUCT SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME 
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE 
ORIGINAL PURCHASER OF THE PRODUCT OR  THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR 
EXCLUSIVE REMEDY. 
						

							Appendix
96
Canon USA offers a range of customer technical support* options: 
zInteractive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked 
questions ( www.canontechsupport.com
) 
z Toll-free live technical support Monday-Saturday (excluding holidays) at  1-800-828-4040 
z Te le p h o n e  D e vi ce  f o r  t h e  De a f  ( TDD-1-866-251-3752) 
z Repair or Exchange Service Options: 
In the event service is required for the  Product during the limited warranty period, Canon USA offers two hardware support 
options: 
Authorized Service Facility Carry-In / Mail-In Service 
Canon USAs Carry-In/Mail-In Service provides repair or exch ange, at Canon USAs option, through Canon USAs Authorized 
Service Facility (ASF) network. The name and telephone number  of the ASF(s) near you may be obtained from Canon USAs 
Web site at: www.canontechsupport.com or by calling the Canon USA Customer Care Center at 1-800-828-4040, or any time 
while speaking to a technical support person. A Product covered by this limited warranty will be repaired or exchanged, as 
determined by Canon USA, and retu rned without charge by the ASF. 
InstantExchange Service ** 
A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, correct 
it over the telephone. If the problem cannot be corrected ov er the telephone, and you elect the InstantExchange option, a 
reference number will be issued to you. You will be asked fo r the Product serial number and other information pertaining to 
your defective Product and for a ship-to location for  the replacement Product (must include street address). 
The Canon USA repair facility will ship out the replacement Product, via 2nd day Air freight service, prepaid by Canon USA. 
After receipt of the replacement Product (with instructions and a prepaid waybill), follow the enclosed instructions on how 
to ship the defective Product to the Canon USA repair facility.  The defective Product must be returned in the shipping carton 
in which the replacement Product was packed and include the reference number, A COPY OF YOUR DATED PROOF OF 
PURCHASE (BILL OF SALE), and a complete explanation of  the problem. DO NOT INCLUDE ANY OTHER ITEMS WITH THE 
DEFECTIVE PRODUCT IN THE RETURN SHIPPING CARTON, AND BE SURE TO RETAIN YOUR PRINTHEAD AND INK CARTRIDGE(S) 
AND TANK(S).
InstantExchange Service expedites, usually by the second business day, the exchange of a defective Product with a 
replacement Product, which will normally be  shipped the same day if your request for this service is by 3 p.m. E.T. Monday 
through Friday, except holidays (three (3) business day InstantExchange Service for Alaska and Hawaii). Canon USA does 
not guarantee expedited shipping service in the event of th e occurrence of factors beyond its reasonable control. The 
replacement Product you receive may be a refurbished or reconditioned unit and will be covered for the balance of the 
period remaining on your original limited warranty. NOTE  THAT BY USING THIS SERVICE YOU WILL KEEP THE REPLACEMENT 
PRODUCT THAT IS SENT TO YOU. CANON USA WILL RETAIN  THE DEFECTIVE PRODUCT THAT YOU ORIGINALLY PURCHASED, 
WHICH SHALL BECOME THE PROPERTY OF CANON USA. InstantExchange warranty program service is available only during 
the express limited-warranty period for your Product and only  in the continental United States, Alaska and Hawaii during 
such period. 
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. 
* Support program specifics are subject to change without notice. 
** InstantExchange warranty service is subject to the availability of refurbished or new replacement units. 
Canon U.S.A., Inc. 
One Canon Plaza 
Lake Success, NY 11042 
USA 
Canon is a registered trademark of Canon Inc. 
©2005 Canon U.S.A., Inc. Canon is a registered trademark of Ca non Inc. in the United States and may also be a registered 
trademark in other countries.