Canon printer PIXMA i850 Series User Manual

Glossy Photo Cards FM-101
101
Printing Media
Glossy Photo Cards FM-101
This photo-size paper is intended for printing images that cover the entire surface of the 
card, without a white border. When printing, use the original application software, 
ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh).
nLoading
¥ Load the paper with the glossy side facing up.
¥ Set the Paper Thickness Lever to the left.
¥ A maximum of 20 sheets can be loaded at once.
¥ Do not use the loading support...

Glossy Photo Cards FM-101
102
Printing Media
nHandling of Printed Output
¥ Do not stack more than 20 sheets in the paper output tray.
¥ Do not touch the printed surface until the ink is Þxed (approx. two minutes). 

Photo Paper Pro PR-101
103
Printing Media
Photo Paper Pro PR-101
This is thick paper with a treated surface that enhances gloss and provides superior color 
reproduction. It is ideal for printing high quality photographs. This media is available in A4/
Letter and 4 x 6 sizes.
nLoading
¥ Up to 20 sheets of 4 x 6 size paper can be loaded at once. You may load up to 10 A4/
letter size sheets, but put them in place one at a time to keep them from sticking to 
each other.
¥ Load the paper with the glossier...

Photo Paper Pro PR-101
104
Printing Media
nPrinter Driver Settings
¥Media Type: Photo Paper Pro
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each sheet as soon as it is printed. 
¥ Do not stack more than 20 sheets of 4 x 6 size paper in the output tray.
¥ Do not touch the printed surface until the ink is Þxed (approx. 30 minutes).
Colors in dark images may appear indistinct at Þrst, but become clearer after about 30 
minutes.
¥ Images may...

Photo Paper Pro PR-101
105
Printing Media
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area
Note
äFor photograph and illustration data that you want to print with Borderless 
Printing, create the data by using the same size as the paper size, and 
paste the data so that it fills the editing screen without leaving any margins.  
If you are using an application...

Photo Paper Pro PC-101S
106
Printing Media
Photo Paper Pro PC-101S
Made of the same material as Photo Paper Pro PR-101, this photo-size paper is intended 
for printing images that cover the entire surface of the card, without a white border. When 
printing, use the original application software, ZoomBrowser EX/PhotoRecord (for 
Windows) or ImageBrowser (for Macintosh).
nLoading
¥ Load the paper with the glossy side facing up.
¥ Set the Paper Thickness Lever to the left.
¥ A maximum of 20 sheets can be...

Photo Paper Pro PC-101S
107
Printing Media
nHandling of Printed Output
Follow the instructions described in Photo Paper Pro PR-101. 

Photo Paper Plus Glossy PP-101
108
Printing Media
Photo Paper Plus Glossy PP-101
This is a thick paper with a glossy water-resistant coating and provides superior colour 
reproduction. It is ideal for printing high quality photographs. This media is available in A4/
Letter and 4 ´ 6 sizes.
nLoading
¥ Up to 10 sheets of A4/Letter size paper can be loaded at once.
¥ Up to 20 sheets of 4 ´ 6 size paper can be loaded at once.
¥ Load the paper with the glossier side facing up.
¥ Set the Paper Thickness Lever...

Photo Paper Plus Glossy PP-101
109
Printing Media
nPrinter Driver Settings
¥Media Type: Photo Paper Plus Glossy
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each sheet as soon as it is printed. 
¥ Colors may slightly change if papers are stacked up before the ink is completely dry. It 
is recommended that you allow the ink to dry for 24 hours.
¥ Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct...

Photo Paper Plus Glossy PP-101
110
Printing Media
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area
Note
äFor photograph and illustration data that you want to print with Borderless 
Printing, create the data by using the same size as the paper size, and 
paste the data so that it fills the editing screen without leaving any margins. 
If you are using an...