Canon printer MAXIFY MB2020 User Manual

Important•
When the application software specifies an input profile, the input profile setting of the printer
driver becomes invalid.
•
When no input ICC profiles are installed on your computer,  Adobe RGB (1998) will not be
displayed.
5.
Set the other items
If necessary, click  Color Adjustment  tab, and adjust Cyan, Magenta , Yellow , Brightness , Intensity ,
and  Contrast  settings, and then click  OK.
6.
Complete the setup
Click  OK on the  Main tab.
When you execute print, the printer uses the color...

Adjusting Color BalanceYou can adjust the color tints when printing.
Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color
balance significantly. Use the printer driver only when you want to adjust the color balance slightly.
The following sample shows the case when color balance is used to intensify cyan and to diminish yellow so that the overall...

There are individual sliders for Cyan, Magenta , and Yellow . Each color becomes stronger when the
corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved
to the left. For example, when cyan becomes weaker, the color red becomes stronger.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The
current settings are displayed in the settings preview on the left side of the printer driver.
After adjusting each...

Adjusting Color Balance Using Sample Patterns (Printer Driver)You can look at the print results of pattern print and adjust the color balance.
When you change the color balance or intensity/contrast of a document, the pattern print function prints the
adjustment results in a list, together with the adjustment values.
Described below is the procedure for adjusting the color balance while looking at the pattern.1.
Open the printer driver setup window
2.
Select the manual color adjustment On the  Main tab,...

4.
Setting pattern print
When the  Pattern Print  dialog box opens, set the following items, and then click  OK.
Parameters to Adjust
Select  Cyan/Magenta/Yellow .
Important
•
When the Grayscale Printing  check box on the Main tab is checked,  Cyan/Magenta/Yellow
appear grayed out and are unavailable.
Printer Paper Size Select the paper size to be used for pattern printing.
Note
•
Depending on the paper size selected on the  Page Setup tab, there may be sizes that cannot
be selected.
Amount of Pattern...

Note•
Large is about double the size of  Medium, and Small  is about half the size of  Medium.
5.
Checking the print results of pattern print
On the  Color Adjustment  tab, select OK to close the  Manual Color Adjustment  dialog box.
On the  Main tab, select  OK, and then execute printing. The printer then prints a pattern in which the
color balance that you set is the center value.
6.
Adjusting the color balance
Look at the print results and select the image that you like best. Then enter the color...

Note
•
You can also set color balance on the Quick Setup tab by choosing  Photo Printing under
Commonly Used Settings , and then choosing Color/Intensity Manual Adjustment  under
Additional Features .
7.
Complete the setup
Click  OK on the  Main tab.
Then when you execute printing, the document is printed with the color balance that was adjusted by the pattern print function.
Important
•
When  Print a pattern for color adjustment  is selected on the Color Adjustment  tab, the following
items are grayed...

Adjusting BrightnessYou can change the brightness of the overall image data during printing.
This function does not change pure white or pure black but it changes the brightness of the intermediate
colors.
The following sample shows the print result when the brightness setting is changed.Light  is selectedNormal  is selectedDark is selected
The procedure for adjusting brightness is as follows:
You can also set brightness on the  Quick Setup tab by choosing  Photo Printing under Commonly Used
Settings ,...

4.
Complete the setup
Click  OK on the  Main tab.
When you execute print, the data is printed at the specified brightness.
Related Topics
Specifying Color Correction
Adjusting Color Balance
Adjusting Intensity
Adjusting Contrast
449 

Adjusting IntensityYou can dilute (brighten) or intensify (darken) the colors of the overall image data during printing.
The following sample shows the case when the intensity is increased so that all colors become more intense
when the image data is printed.No adjustmentHigher intensity
The procedure for adjusting intensity is as follows:
You can also set intensity on the  Quick Setup tab by choosing  Photo Printing under Commonly Used
Settings , and then choosing  Color/Intensity Manual Adjustment...