Canon printer MAXIFY MB2020 User Manual

The confirmation screen will appear.
7.
Select Yes, then press the  OK button.
The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print head. This takes about 2 to 3 minutes.
The pattern print confirmation screen will appear.
8.
Select  Yes, then press the  OK button.
The nozzle check pattern will be printed.
9.
When the completion message appears, press the  OK button.
10.
Examine the nozzle check pattern .
If the...

Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print headposition.
Note
•
When the ink has run out during printing the nozzle check pattern, the error message will appear on theLCD.
A Message Is Displayed
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized...

The confirmation screen will appear.
7.
Select Yes, then press the  OK button.
The print head alignment sheet will be printed and the print head position will be adjusted automatically.
This takes about 3 to 4 minutes.
Note
•
If the automatic adjustment of the print head position has failed, the error message appears on the LCD.
A Message Is Displayed
8.
When the completion message appears, press the  OK button.
Note
•
If the print results are still not satisfactory after adjusting the print head...

Aligning the Print Head ManuallyIf printed ruled lines are misaligned or print results are still not satisfactory after adjusting the print head
position automatically, adjust the print head position manually.
Note
•
For details on adjusting the print head position automatically, see Aligning the Print Head .
You need to prepare: two sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load two sheets of A4 or Letter-sized plain paper in the cassette.
After inserting the...

The confirmation screen will appear.
Note
•
To print and check the current head position adjustment values, select Print the head alignment
value .
7.
Select  Yes, then press the  OK button.
The print head alignment pattern is printed.
8.
When the message " Did the patterns print correctly? " appears, confirm that the pattern is
printed correctly, select  Yes, then press the  OK button.
The input screen for the head position adjustment values will appear.
9.
Look at the first pattern, then use...

Note
•
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable verticalstreaks.
A: Unnoticeable vertical streaks
B: Noticeable vertical streaks
10.
Repeat the same procedure until you finish inputting the pattern number for columns B to
M, then press the  OK button.
11.
Confirm the message, then press the  OK button.
The second pattern is printed.
12.
Look at the second pattern, then use the  or  button to select the number of the pattern
in column N that has the...

Note
•
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontalstreaks.
C: Unnoticeable horizontal streaks
D: Noticeable horizontal streaks
1.
Repeat the same procedure until you finish inputting the pattern number for columns O to T,
then press the  OK button.
For column P, pick the least noticeable vertical streaks.
2.
Confirm the message, then press the  OK button.
217 

Performing Maintenance from a Computer
Cleaning the Print Heads from Your Computer
Aligning the Print Head Position from Your Computer
Use Your Computer to Print a Nozzle Check Pattern
218 

Cleaning the Print Heads from Your ComputerThe print head cleaning function allows you to clear up clogged print head nozzle. Perform print head
cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
The procedure for cleaning the print head is as follows:
 Cleaning
1.
Open the printer driver setup window
2.
Click  Cleaning  on the Maintenance  tab
When the  Print Head Cleaning  dialog box opens, select the ink group for which cleaning is to be
performed.
Click...

When the Deep Cleaning  dialog box opens, select the ink group for which deep cleaning is to be
performed.
Click  Initial Check Items  to display the items you need to check before performing deep cleaning.3.
Execute deep cleaning
Make sure that the printer is on and then click  Execute.
Click  OK when the confirmation message appears.
Print head deep cleaning starts.
4.
Complete deep cleaning
The  Nozzle Check  dialog box opens after the confirmation message.
5.
Check the results
To check whether the...