Canon printer imageCLASS MF3010 User Manual

9
2. Remove the \backing materials.* The \backing materials may be changed in form or \blacement, or may be added or removed without notice.
Remove the ta\be that is 
attached to the \ba\ber (the 
\ba\ber describes \brecautions).Remove the \backing materials.
 C a r r y i n g   t h e   \f a c h i n e   t o   t h e   I n s t a l l a t i o n   S i t e 
a n d   R e m o v i n g   t h e   Pa c k i n g   \f a t e r i a l s
1. Carry the machine to the installation site.
Hold the gri\bs.Carry the machine.
Did...

10
P r e \b a r i n g   t h e  To n e r   C a r t r i d g e s
1. Lift the scanning \blatform.
Lift the scanning \blatform.Hold the o\beration \banel.
If you ca\b\bot lift the sca\b\bi\bg 
platform
\fake sure that the \blaten glass is 
com\bletely closed.
Do not try to forcefully lift the 
scanning \blatform as this may 
damage the machine.
3. Remove the \backing materials from the toner cartridge, and then distribute the toner.
2. O\ben the t oner cover.
O\ben the toner cover.
Remove the \backing...

11
Remove the \backing material.Remove the \backing material.
Lift the tab. 
Place the toner cartridge on a flat sur\bface, 
and then lift the tab\f
Shake five to six times. 
Pull the sealing ta\b\he com\bletely out.
The full length of \bthe sealing tape is\b 
approxi\bately 19 3/4” (50 c\b)\f
Insert the toner cartridge.
Fit the protrusions on each \bside of the toner cartridge into the guides 
located on each side of\b the \bachine, and then slide t\bhe toner cartridge 
into the \bachine\f
Did you...

12
4. Close the toner cover, and then lower the scanning \bla\htform.
Lower the scanning \bla\htform.Close the toner cover.
L o a d i n g   Pa \b e r
1. O\ben the \ba\ber casse\htt e.
2. Load the \ba\ber, and then adjust t\hhe \ba\ber guides.
Load the \ba\ber.
Load the paper until\b the edge of the pa\bper stack \beets the\b back of the 
paper cassette\fS\bread the \ba\ber guides\h.
Spread the paper guide\bs a little 
wider than the pape\br size\f
 Whe\b usi\bg e\bvelopes
   For details on how to load...

13
Slide the \ba\ber guid\he to the rear 
edge of the \ba\ber wi\hthout s\bace.Slide the \ba\ber guid\hes to the 
\ba\ber width without \hs\bace.
Do not connect the USB cable. Connect the USB cable whe\hn installing the so\hftware.
Ensure that the machine is of\hf.
Plug the \bower \blug into the 
\bower socket.Plug the \bower \blug into a AC 
\bower outlet.
C o n n e c t i n g   t h e   Po w e r   C o r d
OFF
Lift the \ba\ber sto\b\ber.Push the \brotrusion.
Pull out the out\but \htray extension....

14
1. Turn ON the machine.
Tu r n   O N   t h e   m a c h i n e
ON
S e t t i n g   a   Pa \b e r  Ty \b e
Press [] (\fenu setting 
key), and then star\ht the menu 
o\beration.
Press [] (\fenu setting key) 
to exit the menu o\beration.
Press [] or [] until 
“P” is dis\blayed.Press [], and set the menu\h to 
be able to change the settin\hgs.
Press [] or [] to change 
the setting values.Press [] to confirm 
the setting.
The  dis\blay  and  the  \ba\ber  ty\bes 
are matched as follows.
Dis\blay Pa\ber ty\be...

15
I n s t a l l i n g   t h e   D r i v e r s   S o f t w a r e  ( Fo r  W i n d o w s )
1. Turn on the com\buter, and then log on a\hs a user with administrative \brivileges.
2. Install the \fF Drivers and \fF Toolbox.
If you have already logged on, exit all a\b\blications which are running.
 •Connect the USB cable after installing the s\hoftware.
 •Ensur

e that the \bower of the machine i\hs turned on when connecting the USB cable.
Insert the CD-RO\f.
If the top scree\b does \bot appear
•  
Windows...

16
Checking the Installation Results
 P. 17
3. Connect the USB cable.
Remove ca\b \blug.
Re\bove by pulling the string\fConnect the cable.
• Flat end (A):  
Connect to the USB \bort 
on the com\buter.
• Square end (B):  
Connect to the USB \bort 
on the machine.
Whe\b a dialog box is displayed
Follow the on-screen instructions and com\blete the installation.
Click.
Select the check box.
Click.Click.
Ensure that [  ] is added.
The CD-RO\f may be removed 
once this screen a\b\bears.
(A)
(B)
Select.Click....

17
Ensure that the \fF Drivers and \fF Toolbox are installed correctly.
Ensure that the icons for the installed so\hftware are added as follows.
SoftwareLocation Icon
Printer driverPrinter folder
 •
W
 indows XP Professional 
From the [Start] menu, select [Printers and Faxes].
 •
Windows XP Home Edition From the [Start] menu, select [Control Panel], click [Printers and Other 
Hardware] → [Printers and Faxes].
 •Windows Vista From the [Start] menu, select [Control Panel], and then cli\hck [Printers]....

18
••Connect the USB cable after installing the s\hoftware.
•• The installation screen varies de\bending on th\he version of \fAC OS X.
I n s t a l l i n g   t h e   S o f t w a r e(For \facintosh)
Close all a\b\blications 
that are running.
Double-click the CD-RO\f icon.
Insert the CD-RO\f.
Double-click.
De\bending on the system environment, the 
[Select a Destination] dialog box may not be 
dis\blayed. In this case, ski\b to ste\b 
.
De\bending on the system environment, the 
[Authenticate] dialog box...