Canon printer imageCLASS MF236n User Manual

      Set the Auto Reset time    
The screen displayed after the Auto Reset is performed can be selected in .
Function After Auto Reset
Select whether to return the display to the default screen after the Auto Reset is performed. If  is selected, the main screen of the function selected in  is displayed ( 
DefaultScreenafterStartup/Restoration(P.486) ). If  is selected, the display returns to the main
screen of the function that was selected.
Default Function
Selected Function
      Select  or...

CommonSettings
1469-090
 All the settings about the operation of the paper drawer and the paper feed
method are listed with short descriptions. Default settings are marked with a dagger (
).
Switch Paper Feed Method
Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing.
However, if you change the setting to , you can just load...

To print on a  speci4c side of paper, you do not need to  5ip over paper in the paper source whether 1- or 2-
sided printing is selected.
	 If    is  set  for  a  paper  source  that  is  loaded  with  paper  you  cannot  use  for  2-sided
printing ( 
Paper (P.650) ),  is applied to the paper source instead. In this case, you need
to  load  the  paper  in  the  same  way  as  when    is  selected  (  
Loading Preprinted
Paper(P.54) ).
	 1-sided printing speed may be slower when  is selected....

CopySettings
1469-091
 All the settings about the copy are listed with short descriptions. Default
settings are marked with a dagger (
).Asterisks( *
)
	 Settings marked with " *1
" are only available for the MF249dw / MF247dw.
	 Settings marked with " *2
" are only available for the MF249dw.
ChangeDefaultSettings(P.496)
CorrectDensity(P.497)
InitializeDefaultSettings(P.497)
Change Default Settings
You can change the factory default settings about copy. The selected settings...

400% (Max)
200%
129% STMT->LTR
78% LGL->LTR
64% LTR->STMT
50%
25% (Min)
 
Non1 Off
2 on 1
4 on 1
ID Card Copy
Select Layout
 
Collate Off
On
 
Sharpness Seven Levels
Correct Density
Specify the initial copy density. You can also change the copy density temporarily. 
AdjustingDensity(P.88)
-4 to 0 to +4
      Adjust the density    
Initialize Default Settings
Select this option to restore the default copy settings.
        
Setting Menu List
497    

FaxSettings
1469-092
 All the settings about the fax are listed with short descriptions. Default
settings are marked with a dagger (
).
IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . 
SettingtheSystemManagerPIN(P.397)
Asterisks( *
)
	 Settings marked with " *1
" are only available for the MF249dw.
	 Settings marked with " *2
" are only available for the MF249dw / MF247dw.
	 Settings marked with " *3
" are unavailable depending...

        Select connection
type 
 
Off-HookAlarm
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0 to 5
        Select the volume of the alert
sound 
   
CommunicationManagementSettings
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be made
when it takes a long time to start sending or receiving a fax...

ChangeDefaultSettings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanningdocuments. 
ChangingDefaultSettings(P.139)
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi  (6uper4ne)
 
Density Nine Levels
 
2-SidedOriginal  *1
Off
Book Type
Calendar Type
 
Sharpness Seven Levels
RegisterUnitName
Register the name of a company or person. RegisteringtheFaxNumberandUnitName(P.108)
The registered...

input without pauses may not be recognized correctly. In this case, try adding a pause after the internationalaccess code or the fax number. If the code or the number is still not recognized correctly, change the duration of the pause. For instructions on how to enter a pause, see step 3 on 
SendingFaxes(P.114) .
1 to 2 to 15 (sec.)
        Specify the duration of
pause 
   
AutoRedial
Specify settings for Auto Redial, a function that automatically redials the fax number after several minutes if the...

6peci4es  whether to redial when a transmission error occurs. Select  or .
TXTerminalID
Specify settings for adding the sender information, including the fax number and the name of the machine, to
the fax header. The recipient can check who sent the fax by looking at the added information.
Off
 
On
Print Position
Inside Image Area
Outside Image Area
Mark Number as
FAX
TEL
          Specify the
settings 
   

6peci4es  the position to print the terminal ID information in the sent fax. Select  to...