Canon printer imageCLASS MF236n User Manual

NetworkSettings
1469-08W
 All the settings about the network are listed with short descriptions. Default
settings are marked with a dagger (
).
IfascreenforenteringaPINisdisplayed Enter the PIN with the numeric keys and tap . 
SettingtheSystemManagerPIN(P.397)
Asterisks( *
)
Settings marked with an asterisk ( *
) are only available for the MF249dw / MF247dw.
SelectWired/WirelessLAN(P.473)
WirelessLANSettings(P.473)
DirectConnectionSettings(P.475)
TCP/IPSettings(P.476)...

EnterManuallySelect to  con4gure  a wireless connection by manually entering an SSID. By using this method, you can specify
authentication and encryption settings in detail. 
SettingUpConnectionbySpecifyingDetailed
Settings(P.329)
SecuritySettings
None
WEP
Open System
Select WEP Key: 1/2/3/4Edit WEP Key
Shared Key Select WEP Key: 1/2/3/4
Edit WEP Key
WPA/WPA2-PSK Auto
AES-CCMP
WPSPushButtonMode
Select to automatically  con4gure a wireless connection by using the button on a WPS wireless...

Direct Connection Settings *
Con4gure  settings for Direct Connection. After  con4guring settings, you can connect to the machine directly and
wirelessly from a mobile device even without an access point or wireless LAN router.
UseDirectConnection
Select whether to use Direct Connection. You can select  or  when  is set to  while the Wirelss LAN connection is enabled. 
MakeDirectConnection(AccessPointMode)(MF249dw/MF247dw)(P.291)
Off  
 
On Direct Connection Only
Wireless LAN/Direct Conn....

       
Select  or     Set SSID Settings or Network
Key Settings 
   
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4Settings
Specify settings for using the machine in an IPv4 network.
IPAddressSettings Con4gure  the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. 
SettingIPv4Address(P.337)
AutoAcquire
Select Protocol
Off
DHCP
BOOTP
RARP
Auto IP Off
On
 
ManuallyAcquire IP...

Domain Name
 
DNSDynamicUpdateSettings Off
On
DNS Dyn. Updt. Intrvl. 0 to 24
 to 48 (hr.)
mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
Con4gurLng DNS(P.377)
Off
 
On
mDNS Name
DHCPOptionSettings Select whether to acquire the host name and whether to use the dynamic update function via the DHCP
options when DHCP is enabled. 
Con4gurLng DNS(P.377)
AcquireHostName
Off
On
 
DNSDynamicUpdate Off
On
 
AcquireSMTPServerAddress  *
Off
On...

StatelessAddressSettingsEnable or disable stateless addresses.  
SettingIPv6Addresses(P.340)
Off

On  
 
CheckSettings Stateless Address
Pre4x  Length
UseDHCPv6
Enable or disable the stateful address that is acquired via DHCPv6. 
SettingIPv6Addresses(P.340)
Off  

On

CheckSettings Stateful Address
Pre4x  Length
DNSSettings
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. 
Con4gurLng DNS(P.377)
DNSHostName/DomainNameSettings
Use...

mDNSSettingsSpecify settings for using DNS functions without DNS servers. 
Con4gurLng DNS(P.377)
Off
 
On
Use IPv4 Name for mDNS
Off mDNS Name
On
LPDPrintSettings
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. 
Con4gurLng PrintingProtocolsandWSDFunctions(P.348)
Off
On
RAWPrintSettings
Enable or disable RAW, a Windows  speci4c printing protocol. Con4gurLng PrintingProtocolsandWSD
Functions(P.348)
Off
On
WSDSettings
Enable or...

UseHTTP
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote
UI, WSD printing, or printing with Google Cloud Print. 
DisablingHTTPCommunication(P.423)
Off
On
PortNumberSettings
Change port numbers for protocols according to the network environment. ChangingPortNumbers(P.409)
LPD 1 to 515
 to 65535
 
RAW 1 to 9100
 to 65535
 
WSDMulticastDiscovery 1 to 3702
 to 65535
 
HTTP 1 to 80
 to 65535
 
POP3  *
1 to 110
 to 65535
 
SMTP  *
1 to 25...

On
Community Name 1 SettingsOff
On
Community Name
MIB Access Permission
Community Name 2 Settings Off
On Community Name
MIB Access Permission
Dedicated Community Settings Off
On
        
 Select  or   Specify settings if  is selected  
SNMPv3Settings
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is
enabled.
Off
On
        Select  or 
 
AcquirePrinterMngt.Info.fromHost
Enable or disable the monitoring of printer management information from a...

Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.
Off
On
      Select  or   
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment. 
Settinga
WaitTimeforConnectingtoaNetwork(P.376)
0 to 300 (sec.)
Ethernet Driver Settings
Select the...