Canon printer imageCLASS D530 User Manual
Have a look at the manual Canon printer imageCLASS D530 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Clean the Machine ………………………………………………\ …… 52Cleaning the Exterior and Interior …………………………………… 52 Cle a ning the Fixing Unit …………………………………………… 53 Cleaning the Platen Glass and Feeder ……………………………… 54 Check and Replace Toner Cartridges ………………………………… 55 Conserving the Toner to Extend the Life of Toner Cartridges ………… 55 Re plac i ng the Toner Cartridge ……………………………………… 56 Manage Using the List Function ……………………………………… 58 Maintenance and Management This chapter describes how to clean the machine, replace the toner cartridge, and explains the report and list function used for managing the machine.
52 Clean the Machine Clean the exterior and interior of the machine, platen glass, feeder, and the fi xing unit periodically. Cleaning the Exterior and Interior Clean the exterior and interior of the machine to prevent toner powder and paper dust from accumulating inside. IMPORTANTIMPORTANT For safety, be sure to turn OFF the machine and disconnect all cables from the machine before cleaning the machine. When you fi nish cleaning the machine, wait for it to dry completely before reconnecting the power cord, and then turn ON the power. Cleaning the Exterior 1 Turn OFF the machine and disconnect all the cables from the machine. 2 Remove any documents from the platen glass or feeder. 3 Clean the exterior of the machine and ventilation slots with a soft, well wrung-out cloth dampened with water or a mild detergent that has been diluted with water. 4 Wait for the printer to dry completely. 5 Reconnect all the cables, and then turn ON the power. Cleaning the Interior 1 Turn OFF the machine and disconnect all the cables from the machine. 2 Remove any documents from the platen glass or feeder. 3 Lift the scanning platform, open the toner cover, and then remove the toner cartridge.
53 Maintenance and Management 4 Remove any toner or paper debris from the interior of the machine, with a soft, dry cloth that is clean and lint-free. 5 Insert the toner cartridge. 6 Close the toner cover, and then lower the scanning platform. 7 Reconnect all the cables, and then turn ON the power. CAUTION ¢£¢£ When closing the scanning platform: Be careful not to get your fi ngers caught. Do not touch the fi xing unit (A). Touching the fi xing unit (A) may cause burns a s it becomes very hot during use. If you get toner on your hands or clothing : If t oner gets on your hands or clothing, wash the m i mmediately with cold water. Washing with warm water makes it impossible to remove the toner stains. Cleaning the Fixing Unit Clean the fi xing unit when black streaks appear on printed pages. 1 Press [ ] (Menu). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Load Letter size plain paper in the multi-purpose tray, and then press [OK]. • The cleaning process begins. Cleaning takes approximately 90 seconds. 5 When the cleaning is complete, press [ ] (Menu) to close the screen.
54 Cleaning the Platen Glass and Feeder If a scanned image has unexpected specks, clean the platen glass and feeder. Cleaning the Platen Glass 1 Turn OFF the machine and disconnect all the cables from the machine. 2 Remove any documents from the platen glass. 3 Open the feeder or the platen glass cover. 4 Clean the platen glass and the under surface of the feeder. • Clean the platen glass with a well wrung out cloth dampened with water and wipe it with a soft, dry cloth. 5 Close the feeder or the platen glass cover. 6 Reconnect all the cables, and then turn ON the power. Cleaning the Feeder 1 Turn OFF the machine and disconnect all the cables from the machine. 2 Remove any documents from the feeder. 3 Open the feeder cover, clean the rollers with a well wrung-out cloth dampened with water, and then wipe them with a soft and dry cloth. MF4890dw 4 Close the feeder cover. 5 Reconnect all the cables, and then turn ON the power.
55 Maintenance and Management Check and Replace Toner Cartridges Toner cartridges are consumable products. When the toner has almost run out, streaks may appear on printed pages. Replace the toner cartridge if necessary. If the print result is not improved, replace the toner cartridge ( →p.56). Gently shake the toner cartridge 5-6 times to evenly distribute the toner ( →p.55). Conserving the Toner to Extend the Life of To n e r C a r t r i d g e s If you redistribute the toner, you may be able to print for some time until the toner runs out. 1 Lift the scanning platform, open the toner cover, and then remove the toner cartridge. 2 Gently shake the toner cartridge 5-6 times to evenly distribute the toner. CAUTION If toner comes in contact with your hands or clothing, wash them immediately in cold water. Do not use warm water, as it will set the toner and make it diffi cult to remove the toner stains.
56 3 Insert the toner cartridge. 4 Close the toner cover, and then lower the scanning platform. Replacing the Toner Cartridge You can purchase replacement toner cartridges from your local authorized Canon dealer. Supported Canon Genuine Toner Cartridge: Canon Cartridge 128 1 Open the operation panel and the toner cover, and then remove the toner cartridge. 2 Prepare a new toner cartridge.• Store the protective bag. It is required when you remove the toner cartridge for printer maintenance or other purposes. Shake the toner cartridge 5-6 times to evenly distribute the toner. Place the toner cartridge on a fl at surface, remove the tab, and carefully pull the sealing tape completely out (20” (50 cm)).
57 Maintenance and Management IMPORTANTIMPORTANT When pulling out the sealing tape: • Do not pull the sealing tape at an angle or up and down. If the tape breaks, it may not be pulled out completely. • Even if the sealing tape stops at midpoint, pull it out of the toner cartridge completely. • If any tape remains in the toner cartridge, this may result in poor print quality. Disposing of the removed sealing tape: Dispose of the packing materials according to local regulations. 3 Insert the toner cartridge. 4 Close the toner cover, and then lower the scanning platform. WARNING Do not dispose of a used toner cartridge in open fl ames. This may cause the toner remaining inside the cartridge to ignite, resulting in burns or a fi r e . When cleaning up spilled or scattered toner: If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe the m u p with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge. CAUTION Precautions to take when you get toner onto your hands or into clothing: If toner comes in contact with your hands or clothing, wash them immediately in cold wa t er. Do not use warm water, as it will set the toner and make it diffi cult to remove the toner stains. Do not allow the toner to scatter. Do not pull out the sealing tape forcefully or stop before it is removed, as this may ca u se toner to spill out. If toner gets into your eyes or mouth, fl ush them immediately with cold water and immediately consult a physician.
58 • Follow all local and federal regulations when disposing of the sealing tape removed from the new toner cartridge. • Canon will collect and recycle your used toner cartridges (→p.71). • For more details about handling toner cartridges, see [Handling Toner Cartridges ] in the e-Manual. Manage Using the List Function Print out lists to view information about the machine and settings. 1 Press [ ] (Report). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Follow the on-screen instructions to print the report or list. 5 Press [ ] (Report) to close the screen. Report and list printouts are limited to 10 pages.
59 Clear Jams ………………………………………………\ …………… 60Clearing Document Jams in the Feeder (D560 Only) ………………… 61 Cle a ring Paper Jams Inside the Machine …………………………… 62 Resolve a Displayed Message ………………………………………… 65 Resolv e an E rr or Code ………………………………………………\ … 65 Improve Output Quality ………………………………………………\ 66 Resolve a Problem ………………………………………………\ …… 68 Troubleshooting This chapter describes how to clear paper jams and off ers solutions to problems you may be having.
60 Clear Jams When appears on the display, a paper jam has occurred in the feeder or inside the machine. To remove the jammed document or paper, follow the instructions on the display. Paper jam. Press [ ] to display steps. WARNING When removing jammed documents or paper: Use caution to avoid paper cuts. When removing jammed paper or in specti ng the inside of the machine: Do not allow necklaces, bracelets, or other metal objects to touch the inside of the mac h ine, as this may result in burns or electrical shock. CAUTION If loose toner comes into contact with your skin or clothing: Wash with cold water. Do not wash with warm water, as this will set the toner and cause it t o stain your skin or clothing. When removing jammed documents or paper: If paper is jammed, remove it carefully so that no pieces of paper remain inside the machi ne according to the displayed message. Also, do not put your hand in an area other than indicated areas, as this may result in personal injuries or burns. IMPORTANTIMPORTANT If the jammed paper is torn: Remove all torn pieces to avoid further jams. If repeated paper jams occur: Do the following: • Make sure that the following packing material is completely removed. This part (a plastic part attached to the end of paper) is also a packing material. Be sure to remove it. • Fan the paper stack and tap the edge on a fl at surface to align the paper before loading it into the machine. • Make sure that the paper meets the requirements for use (→ p.19). • Make sure that you have removed all scraps of paper from the inside of the machine.