Canon printer imageCLASS D1180 User Manual

Copying 
3-4
Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1 
Place documents on the platen glass or 
load them in the ADF.
For details, see “Placing Documents,” on p. 2-4.
Close the ADF after placing your documents.
For documents you can copy, see “Documents 
Requirements,
” on p. 2-2.
2 
Press  [COPY ].
The COPY indicator lights up and the machine 
enters the copy standby mode.
If you want to adjust the image quality, see 
“Selecting Image Quality,
”...

Copying 
3-5
Canceling Copy Jobs
Canceling Copy Jobs
This section describes how to cancel copy jobs.
Canceling Scanning or Outgoing 
Jobs
You can cancel scanning or outgoing jobs.
If you cancel a copy job during scanning, make sure to remove 
the document.
1 
Press  [Stop/Reset].
2 
When the  message 
appears, press [OK].
■	When scanning using the ADF:
P R E S S   O K   K E Y S T O P   K E Y   P R E S S E D
■	When scanning using the platen glass:
S T O P   K E Y   P R E S S E D
3 
When the  message...

Copying 
3-6
Canceling Copy Jobs
4 
Press  or  to select , 
then press [OK].
C A N C E L 0 0 0 3
5 
Press  to select .
  <   Y E S                   N O   > C A N C E L ?
If you do not want to cancel the job, press  to 
select .
6 
Press  [Stop/Reset] to return to the 
standby mode. 

Copying 
3-7
Selecting Paper Source
Selecting Paper Source
You can manually specify a paper source (paper cassette (1 or 2) or multi-purpose tray) by 
pressing 
 [Paper Select].
The suffix  (such as in LTRR), used in paper size designations, indicates that the paper is loaded in the paper cassette or the 
multi-purpose tray horizontally.
Copying on Papers in Paper 
Cassettes
You need to set up the paper size and type for each 
paper source in advance. For details about 
configuring the paper size and...

Copying 
3-8
Selecting Paper Source
5 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page.
You can set the machine to automatically select 
the appropriate paper source based on the 
document’s size and copy ratio settings (Auto 
Paper Selection). You can also set the machine 
to automatically select another paper source 
with the same paper size if the current paper 
source runs out of paper while processing a job...

Copying 
3-9
Selecting Paper Source
4 
Load the papers into the multi-purpose 
tray.
If  is set to , go to 
the next step.
If  is set to , skip to 
step 7.
5 
Press  or  to select the paper size, 
then press [OK].
L T R S E L E C T   P A P E R   S I Z E
To copy onto standard size papers, select the 
paper size from the followings:  
, , , , , or 
.
For details, see “Paper Requirements,
” on p. 2-6 
and “Printable Area,
” on p. 2-8.
–
–
–
–
6 
Press  or  to select the paper type, 
then press [OK].
P L A I...

Copying 
3-10
Selecting Paper Source
1 
Place documents.
For details, see “Placing Documents,” on p. 2-4.
2 
Press  [COPY ].
3 
Press  [Paper Select] repeatedly to 
select the multi-purpose tray.
The paper select indicator of the selected paper 
source lights up. (See “Operation Panel,
” on p. 1-
6.)
4 
Load the paper into the multi-purpose 
tray.
If  is set to , go to 
the next step.
If  is set to , skip to 
step 7.
5 
Press  or  to select , then press [OK].
C U S T O M   S I Z E S E L E C T   P A P E R...

Copying 
3-11
Selecting Paper Source
10
 Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 
[Start] once for each page.
Using the Multi-Purpose Tray with 
Envelopes
This section describes how to copy onto envelopes 
using the multi-purpose tray.
If  is set to , the display to specify the 
paper size and type for the multi-purpose tray appear every 
time you load paper on the multi-purpose tray. If  is set to , copying can be performed only for...

Copying 
3-12
Selecting Image Quality
Selecting Image Quality
You can adjust the image quality of copies according to the types of documents. A correct 
selection is necessary for the optimal reproduction of the colors of the document. These 
settings return to the default values if the Auto Clear function is activated or if you press 
 [Stop/Reset]. The default setting is .
Combinations of these four modes ( TEXT/PHOTO, TEXT/PHOTO+, TEXT, and PHOTO) cannot be selected at the same time. 
If you select...

Copying 
3-13
Selecting Image Quality
4 
Use  –  [numeric keys] to enter the 
desired copy quantity (1 to 99).
            T E X T / P H O T O 1 0 0 %                 L T R0 1
5 
Press  [Start].
If you want to copy multiple documents using 
the platen glass, place a document and press 
 [Start] once for each page.