Canon printer imageCLASS D1180 User Manual

Documents and Print Media 
2-14
Loading Paper
When loading paper into the multi-purpose 
tray, align the paper stack neatly between the 
slide guides. If the paper is not loaded correctly, 
a paper jam may occur.
If you are printing on heavyweight paper or 
envelopes using the multi-purpose tray, and 
find that the paper or envelopes are not being 
fed smoothly or evenly through the multi-
purpose tray, remove the paper or envelopes, 
curl the feeding edges upward approximately 
1/8”
 (3 mm), and then...

Documents and Print Media 
2-15
Loading Paper
③	Hold down the four corners of the 
envelopes firmly, so that they and the 
sealed or glued portion stay flat.
Do not print on the back side of the envelopes 
(the side with the flap).
If the envelopes become filled with air, flatten 
them by hand before loading them into the 
multi-purpose tray.
–
–
 Load the envelopes, as shown below.
The display for specifying the paper size and 
type appears if  is set to 
. For details, see “Setting Paper Size and...

Documents and Print Media 
2-16
Loading Paper
Setting the Paper Size Switch Lever
When performing 2-sided copying or 2-sided 
printing, make sure to confirm that the paper size 
switch lever is set to the appropriate position. Paper 
jams may occur if the lever is not set appropriately. 
Follow the procedure below to set the paper size 
switch lever.
1 
Open the duplex unit cover.
Hold the opening at the center of the duplex 
unit cover and open it gently.
2 
Set the blue paper size switch lever (A) to...

Documents and Print Media 
2-17
Setting Paper Size and Type
Setting Paper Size and Type
This section describes how to specify the paper size and type you are loading in the paper 
cassette and the multi-purpose tray. Whenever you change the paper size and type in the 
cassette and the tray, follow the procedure in this section to adjust the paper size and type 
settings for the cassette and the tray.
For the Paper Cassette
The default settings are as follows:: 
: 
1 
Press  [Paper Settings] repeatedly to...

Documents and Print Media 
2-18
Setting Paper Size and Type
2 
Press  or  to select , then 
press [OK].
                                    O N M P   T R A Y   S T D   S E T
If you select , the display for specifying 
the paper size and type for the multi-purpose 
tray appears every time you load paper in the 
multi-purpose tray.
3 
Press  or  to select the paper size, 
then press [OK].
                                  L T R     P A P E R   S I Z E ( T R A Y )
You can select from the following paper...

Documents and Print Media 
2-19
Output Tray
Output Tray
This section describes the features of the output trays.
Output Tray Type
This machine has two output trays: the output tray 
on the front side of the machine and the sub-
output tray on the rear side of the machine. 
Do not switch one output tray to another during 
printing. This may result in paper jams.
Keep your hands and clothing away from the roller in the output 
area. Even if the machine is not printing, sudden rotation of the 
roller may...

Documents and Print Media 
2-20
Setting Paper Size and Type
Sub-output Tray
Printed paper is output to the sub-output tray on 
the rear side of the machine with the printed side 
facing up. Printed paper is stacked in reverse page 
order. The sub-output tray is suitable for use when 
printing transparencies, labels, or envelopes that 
curl easily, because the printed paper remains flat 
when output. 
The surroundings of the sub-output tray are hot during printing 
or immediately after printing. When...

Copying 
3
Copying 
This chapter describes the copying features.
Overview of Copy Functions ....................................... 3-2
Basic Copying Method  ................................................ 3-4
Canceling Copy Jobs  .................................................... 3-5
Canceling Scanning or Outgoing Jobs  ........................3-5
Canceling Reserved Jobs  ..................................................3-5
Selecting Paper Source  ............................................... 3-7...

Copying 
3-2
Overview of Copy Functions
Overview of Copy Functions
In addition to enlarging/reducing copies, you can make 2-sided copies or use the 2 on 1 
mode, which reduces 2 page documents to fit on one sheet of paper.
(p. 3-12)
(p
.  3-14) 

Copying 
3-3
Overview of Copy Functions
(p. 3-16)
(p
.  3-24)
(p

.  3-21)