Canon printer Color imageCLASS MF8450c User Manual

Copying
4-12
Selecting Paper Source
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper type, then press [OK].
You can select from the following paper types:
, , , , 
, , , 
, , 
For details, see “P
 aper Requirements,” on p. 2-7.
If you want to print the back side of the printed 
paper, press the right Any key to select .
7 
Press [OK] to select .
8 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
9 
Press  (Start).
If you want to copy multiple originals using the 
platen...

Copying
4-13
Selecting Paper Source
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Load the paper into the stack bypass tray.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
6 
Press [OK] to select the horizontal length 
.
Using Stack Bypass Tray with Irregular Sizes of Paper
This section describes how to copy onto non-standard-sized paper using the stack bypass tray.
If...

Copying
4-14
Selecting Paper Source
7 
Use [▼], [▲] or  (Scroll Wheel) to 
specify the length of X, then press [OK].
You can adjust values for  between 3" and 8 
1/2".
8 
Use [▼] or  (Scroll Wheel) to select the 
vertical length , then press [OK].
9 
Use [▼], [▲] or  (Scroll Wheel) to 
specify the length of Y, then press [OK].
You can adjust values for  between 5" and 14".
10
  Use [▼] or  (Scroll Wheel) to select 
, then press [OK].
11
  Use [▼], [▲] or  (Scroll Wheel) to select 
the...

Copying
4-15
Selecting Paper Source
Using Stack Bypass Tray with Envelopes
This section describes how to copy onto envelopes using the stack bypass tray.
If  setting in  from the Additional Functions screen is set to , the paper size/type setting 
screen appears when you load a paper in the stack bypass tray. If Stack Bypass Standard Settings is set to , copying can be 
performed only for the registered paper size and type. (See “S
etting Paper Size and Type,” on p. 2-20.)
1 
Set originals.
For details,...

Copying
4-16
Selecting Paper Source
4 
Load envelopes into the stack bypass.
For details, see “In the Stack Bypass Tray,” on p. 2-
15.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired size of envelopes, then press 
[OK].
You can select from the following sizes of 
envelopes:
, , , , 
For details, see “P
 aper Requirements,” on p. 2-7.
6 
Press [OK] to select .
7 
Press  (Start).
8 
Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-17
Adjusting Density
Adjusting Density
You can manually adjust the copy exposure to the most appropriate level for the original. 
The copy tone becomes lighter as the indicator moves to the left, and darker as it moves to 
the right.  
The default setting is .
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK]. 

Copying
4-18
Adjusting Density
5 
Use [▼], [▲], [◀], [▶], or  (Scroll 
Wheel) to adjust the copy density, then 
press [OK].
To make dark originals lighter, move the 
density scale to the left.
To make light originals darker, move the 
density scale to the right.
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
–
–
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
8 
Press  (Main Menu) to return...

Copying
4-19
Adjusting Density
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Press the right Any key to select 
.
Adjusting Base Color
This mode enables you to adjust or remove the base color of the originals. 
The default setting is . 

Copying
4-20
Adjusting Density
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the background setting, then press [OK].
■  If you select :
①
  Use [▼], [▲] or 
 (Scroll Wheel) to select 
, then press [OK].
②  Press [OK], then skip to step 7.
■ If you select :
①
  Use [▼], [▲] or 
 (Scroll Wheel) to select 
, then press [OK].
②  Use [▼], [▲] or  (Scroll Wheel) to select 
the desired color, then press [OK].
③  Use [▼], [▲], [◀], [▶] or  (Scroll Wheel) 
to adjust the strength of the color, then 
press [OK].
④...

Copying
4-21
Adjusting Density
8 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
9 
Press  (Main Menu) to return to the 
Main Menu screen.