Canon PowerShotG7X Mark II User Guide

181
 ●For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” ( =
 219). ●
You can view images even while the battery is charging, by 
turning the camera on and entering Playback mode ( = 24). 
However, you cannot shoot while the battery is charging.
 ● If the USB charge lamp does not light up, remove the interface 
cable and insert the cable again.
 ●Charged battery packs gradually lose...

182
Computer Connections via a Cable
Checking Your Computer Environment
For detailed system requirements and compatibility information on 
computers for using the software, including support for new operating 
systems, visit the Canon website.
Installing the Software
For software installation instructions, see “Installing the Software”\
 
(= 147).
Saving Images to a Computer
Using a USB cable (sold separately; camera end: Micro-B), you can 
connect the camera to the computer and save images to the...

183
 ●Windows 7: If the screen in step 2 is not displayed, click the [] 
icon in the taskbar.
 ● Mac OS: If CameraWindow is not displayed after step 2, click the 
[CameraWindow] icon in the Dock.
 ●Although you can save images to a computer simply by 
connecting your camera to the computer without using the 
software, the following limitations apply.
 -It may take a few minutes after you connect the camera to the 
computer until camera images are accessible.
 -Images shot in vertical orientation may be...

184
5 Access the printing screen.
 zPress the [] button, choose [], and 
press the [] button again.
6 Print the image.
 z Press the [][] buttons or turn the [] 
dial to choose [Print], and then press the 
[
] button.
 z Printing now begins.
 zTo print other images, repeat the above 
procedures starting from step 4 after 
printing is finished.
 zWhen you are finished printing, turn the 
camera and printer off and disconnect 
the cable.
 ● For Canon-brand PictBridge-compatible printers (sold separately),...

185
Cropping Images before Printing
 Still Images  Movies
By cropping images before printing, you can print a desired image area 
instead of the entire image.
1 Choose [Cropping].
 zAfter following step 1 in “Configuring Print 
Settings” ( = 185) to access the printing 
screen, choose [Cropping] and press the 
[
] button.
 z A cropping frame is now displayed, 
indicating the image area to print.
2 Adjust the cropping frame as 
needed.
 zTo resize the frame, move the zoom 
lever.
 zTo move the frame,...

186
Available Layout Options
Default Matches current printer settings.
Bordered Prints with blank space around the image.
Borderless Borderless, edge-to-edge printing.
N-up Choose how many images to print per sheet.
ID PhotoPrints images for identification purposes.
Only available for images with a recording pixel setting of 
L and an aspect ratio of 3:2.
Fixed Size Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Printing ID Photos
 Still Images  Movies
1 Choose [ID...

187
 ●To cancel printing in progress, press the [] button, choose [OK], 
and then press the [] button again. ● After displaying a scene to print as described in steps 2 – 5 of 
“Viewing” ( = 110), you can also access the screen in step 1 
here by pressing the [][] buttons to choose [] in the movie 
control panel and then pressing the [] button.
Adding Images to the Print List (DPOF)
 Still Images  Movies
Batch printing ( = 189) and ordering prints from a photo development 
service can be set up on the...

188
 ●Specifying [Index] will prevent you from choosing [On] for both 
[Date] and [File No.] at the same time.
 ●Index printing is not available on some Canon-brand PictBridge-
compatible printers (sold separately).
 ●The date is printed in a format matching setting details in [Date/
Time] on the [2] tab ( = 21).
Setting Up Printing for Individual Images
 Still Images  Movies
1 Choose [Select Images & Qty.].
 z
Press the [] button, choose [Print 
settings] on the [4] tab, and then press 
the [] button....

189
Clearing All Images from the Print List
 zFollowing step 1 in “Setting Up Printing 
for Individual Images” ( = 188), choose 
[Clear All Selections] and press the [] 
button.
 z Press the [][] buttons or turn the [] 
dial to choose [OK], and then press the 
[
] button.
Printing Images Added to the Print List (DPOF)
 Still Images  Movies
 z When images have been added to the 
print list ( = 187 – = 189), this screen 
is displayed after you connect the camera 
to a PictBridge-compatible printer. Press...

190
2 Choose an image.
 zPress the [][] buttons or turn the [] 
dial to choose an image, and then press 
the [
] button.
 z [] is displayed.
 zTo remove the image from the photobook, 
press the [] button again. [] is no 
longer displayed.
 z Repeat this process to specify other 
images.
 zWhen finished, press the [] button 
to return to the menu screen.
Adding All Images to a Photobook
 Still Images  Movies
 z Following the procedure in “Choosing 
a Selection Method” ( = 190), choose 
[Select All Images]...