Canon PowerShotG7X Mark II User Guide

151
 ●Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by pressing the [
][] buttons to 
choose the device and then pressing the [] button. To add a 
new device, display the device selection screen by pressing the 
[
][] buttons, and then configure the setting. ● If you prefer not to display recent target devices, choose MENU 
(= 30) ► [4] tab ► [Wireless settings] ► [Wi-Fi Settings] ► 
[Target...

152
Previous Access Points
You can reconnect to any previous access points automatically by 
following step 4 in “Using WPS-Compatible Access Points” (= 149).
 ●
To connect to a device via an access point, confirm that the target 
device is already connected to the access point, and then follow the 
procedure from step 8 in “Using WPS-Compatible Access Points” 
(=
 149).
 ●
To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then either follow...

153
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON 
iMAGE GATEWAY as a destination Web service on the camera. Note 
that you will need to enter an email address used on your computer or 
smartphone to receive a notification message for completing linkage 
settings.
1 Access the Wi-Fi menu.
 zPress the [] button.
 zIf the [Device Nickname] screen is 
displayed, press the [][] buttons or 
turn the [] dial to choose [OK], and then 
press the [] button.
2 Choose []....

154
7 Check for the notification message.
 zOnce information has been sent to 
CANON iMAGE GATEWAY, you will 
receive a notification message at the 
email address entered in step 5.
 zThe screen is displayed to notify that the 
e-mail notification was sent. Press the 
[
] button.
 z[] now changes to [].
8 Access the page in the notification 
message and complete camera link 
settings.
 zFrom a computer or smartphone, 
access the page linked in the notification 
message.
 zFollow the instructions to...

155
3 Choose [].
 zPress the [] button.
 zPress the [][][][] buttons or turn 
the [] dial to choose [], and then 
press the [] button.
 z The Web service settings are now 
updated.
 ● If any configured settings change, follow these steps again to 
update the camera settings.
 ●Make sure initially that your computer or smartphone mail 
application is not configured to block email from relevant domains, 
which may prevent you from receiving the notification message.
 ●You can also change the camera...

156
 ●Connections require that a memory card with saved images be in 
the camera.
 ●You can also send multiple images at once, resize images, and 
add comments before sending ( = 159). ●
To view images uploaded to CANON iMAGE GATEWAY on a 
smartphone, try the dedicated Canon Online Photo Album app. 
Download and install the Canon Online Photo Album app for 
iPhones or iPads from the App Store or for Android devices from 
Google Play
.
Uploading Images to Web Services
1 Access the Wi-Fi menu.
 z Press the...

157
4 Connect the printer to the network.
 zIn the printer’s Wi-Fi setting menu, 
choose the SSID (network name) 
displayed on the camera to establish a 
connection.
 zIn the password field, enter the password 
displayed on the camera.
5 Choose the printer.
 zChoose the printer name (either press the 
[][] buttons or turn the [] dial), and 
then press the [] button.
6 Choose an image to print.
 z Press the [][] buttons or turn the [] 
dial to choose an image.
7 Access the printing screen.
 z Press the []...

158
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as 
follows.
 ●Only Canon-brand cameras equipped with a Wi-Fi function can be 
connected to wirelessly. You cannot connect to a Canon-brand camera 
that does not have a Wi-Fi function, even if it supports FlashAir/Eye-Fi\
 
cards.
1 Access the Wi-Fi menu.
 zPress the [] button.
2 Choose [].
 zPress the [][][][] buttons or turn 
the [] dial to choose [], and then 
press the [] button.
3 Choose [Add a Device]....

159
Image Sending Options
You can choose multiple images to send at once and change the image 
recording pixel setting (size) before sending. Some Web services also 
enable you to annotate the images you send.
Sending Multiple Images
1 Choose [Select and send].
 zOn the image transfer screen, press the 
[][] buttons to choose [Select and 
send], and then press the [] button.
2 Choose a selection method.
 z Press the [][] buttons or turn the [] 
dial to choose a selection method.
Choosing Images...

160
2 Choose images.
 zFollow steps 2 – 3 in “Selecting a Range” 
(= 122) to specify images.
 z
To include movies, press the 
[][][][] buttons to choose [Incl. 
Movies], and then press the [] button to 
mark the option as selected ().
 z Press the [][][][] buttons to choose 
[OK], and then press the [] button.
3 Send the images.
 z Press the [][] buttons or turn the [] 
dial to choose [Send], and then press the 
[
] button.
Sending Favorite Images
Send only images tagged as favorites ( = 126).
1 Choose...