Canon PowerShot N100 User Manual

							131
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
6  Choose [PBC Method].
 
zPress the  buttons to choose 
[PBC Method], and then press the  
button.
 7  Establish the connection.
 
zOn the access point, hold down the WPS 
connection button for a few seconds.
 
zOn the camera, press the  button to 
go to the next step.
 
zThe camera will connect to the access 
point.
 
zIf you have selected [], [ 2], or [] in 
step 3, devices connected to the access 
point are listed on the [Select a Device] 
screen displayed next.
 
zIf you have selected a Web service in 
step 3, go to step 12.
8  For a smartphone connection:
Start CameraWindow.
 
zFor an NFC-compatible Android 
smartphone (OS version 4.0 or later), 
activating NFC and touching the 
smartphone against the camera’s N-Mark 
(
, =  124) will start CameraWindow 
on the smartphone.
 
zFor other smartphones, start 
CameraWindow on the smartphone.
 
zThe first time CameraWindow is opened, 
register a smartphone nickname to be 
displayed on the camera.
 
zOnce the smartphone is recognized on 
the camera, the device connection screen 
will be displayed on the camera.
 
						

							132
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 9  To connect to a smartphone, printer, or computer:
Choose the target device.
 
zPress the  buttons to choose 
the target device name, and then press 
the  button.
 
zIf you have selected a smartphone, go to 
step 11.
 
zIf you have selected a printer or 
Macintosh computer, go to step 12.
10  If you have selected a computer 
running Windows in step 9 for 
the first time:
Install a driver.
 
zWhen the screen at left is displayed on 
the camera, click the Start menu on the 
computer, click [Control Panel], and then 
click [Add a device].
 
zDouble-click the connected camera icon.
 
zDriver installation will begin.
 
zAfter driver installation is complete, and 
the camera and computer connection 
is enabled, the AutoPlay screen will be 
displayed. Nothing will be displayed on 
the camera screen.
  11  For a smartphone connection:
Adjust the privacy setting.
 
zPress the  buttons to choose 
[Yes], and then press the  button.
 
zYou can now use the smartphone to 
browse, import, or geotag ( =  147) 
images on the camera or shoot remotely 
(=
  148).
 
						

							133
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 12  Send or print the images.
 
zThe screen displayed when the devices 
are connected varies depending on the 
target device.
 
zWhen the camera is connected to a 
smartphone or Web service, an image 
transfer screen is displayed.
 
zFor instructions on sending images, see 
“Sending Images” ( =  139).
 
zWhen the camera is connected to a 
computer, the camera screen is blank. 
Follow the steps in “Saving Images to a 
Computer” ( =
  142) to save images to 
the computer.
 
zWhen the camera is connected to a 
printer, you can print by following the 
same steps as for printing via USB. For 
details, see “Printing Images” ( =
  171).
•  All images in the camera can be viewed from the connected 
smartphone when you choose [Yes] in step 11.  T

o keep camera 
images private, so that they cannot be viewed from the smartphone, 
choose [No] in step 11.
•  To change privacy settings for smartphones added to the list, 
choose the smartphone whose settings you want to change from 
[Edit a Device] in step 4, and then choose [View Settings].
•  If you chose [PIN Method] in step 6, a PIN code will be displayed on the\
 
screen. Be sure to set this code in the access point. Choose a device in\
 the 
[Select a Device] screen. For further details, refer to the user manual \
included 
with your access point.
•  To add multiple destinations, repeat this procedure from the first step.
•  Once you have assigned a connection destination to Touch Actions ( =
  106), 
you can prepare the camera to reconnect to the destination simply by dra\
gging 
across the screen with the assigned gesture.
Previous Access PointsYou can reconnect to any previous access points automatically by followin\
g 
step 4 in “Connecting to WPS-Compatible Access Points” ( =  130).
•  To reconnect to the access point, confirm that the target device is alrea\
dy 
connected to it, and then follow the procedure from step 9. Note that th\
is 
step is not required when connecting to Web services.
•  To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then follow the 
procedure from step 5.
 
						

							134
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Connecting to Access Points in the List
1  View the listed access points.
 
zView the listed networks (access 
points) as described in steps 1 – 4 of 
“Connecting to WPS-Compatible Access 
Points” (=
  130).
2  Choose an access point.
 
zPress the  buttons to choose a 
network (access point), and then press 
the  button.
3  Enter the access point 
password.
 
zPress the  button to access the 
keyboard, and then enter the password 
(=
  129).
 
zPress the  buttons to choose 
[Next], and then press the  button.
4 Choose [Auto].
 
zPress the  buttons to choose 
[Auto], and then press the  button.
 
zIf you selected [], [ 2], or [] as the 
target device, see “Connecting to WPS-
Compatible Access Points”, starting with 
step 9 (=
  132).
 
zIf you selected a Web service as the 
destination, see “Connecting to WPS-
Compatible Access Points”, starting with 
step 12 (=
  133).
•  To determine the access point password, check on the access point itself \
or 
refer to the user manual.
•  Up to 16 access points will be displayed. If no access points are detect\
ed, 
choose [Manual Settings] in step 2 to manually set an access point. Foll\
ow on-
screen instructions and enter an SSID, security settings, and a password\
.
•  When you use an access point that you have already connected to for 
connecting to another device, [*] is displayed for the password in step \
3.  To 
use the same password, press the < o><

p> buttons to choose [Next], and 
then press the  button.
 
						

							135
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
  Connecting without an Access Point
 When connecting to a smartphone or printer via Wi-Fi, you can use the 
camera as an access point (Camera Access Point mode) instead of using 
another access point.
Similarly, no access point is used in camera-to-camera connections 
(=
  138).
1  Access the Wi-Fi menu (=  128 ).
2  Choose the target device.
 
zPress the  buttons to 
choose the target device, and then press 
the  button.
 
zTo connect to a smartphone, choose [].
 
zTo connect to a printer, choose [2].
 3  Choose [Add a Device].
 
zPress the  buttons to choose 
[Add a Device], and then press the < m> 
button.
 
z The camera’s SSID is displayed.
 4  Connect the target device to the 
network.
 
zIn the smartphone or printer’s Wi-Fi 
setting menu, choose the SSID (network 
name) displayed on the camera to 
connect to it.
 
						

							136
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
  7  For a smartphone connection:Adjust the privacy setting.
 
zPress the  buttons to choose 
[Yes], and then press the  button.
 
zYou can now use the smartphone to 
browse, import, or geotag ( =  147) 
images on the camera or shoot remotely 
(=
  148).
8  Send or print the images.
 
zThe screen displayed when the devices 
are connected varies depending on the 
target device.
 
zWhen the camera is connected to a 
smartphone, an image transfer screen is 
displayed.
 
zFor instructions on sending images, see 
“Sending Images” ( =  139).
 
zWhen the camera is connected to a 
printer, you can print by following the 
same steps as for printing via USB. For 
details, see “Printing Images” ( =
  171).
5  For a smartphone connection:
Start CameraWindow.
 
zFor an NFC-compatible Android 
smartphone (OS version 4.0 or later), 
activating NFC and touching the 
smartphone against the camera’s N-Mark 
(
, =  124) will start CameraWindow 
on the smartphone.
 
zFor other smartphones, start 
CameraWindow on the smartphone.
 
zThe first time CameraWindow is opened, 
register a smartphone nickname to be 
displayed on the camera.
 
zOnce the smartphone is recognized on 
the camera, the device connection screen 
will be displayed on the camera.
6  Choose the target device.
 
zPress the  buttons to choose 
the target device name, and then press 
the  button.
 
						

							137
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Previous Access Points
You can reconnect to any previous access points automatically by followin\
g 
step 3 in “Connecting without an Access Point” (=  135).
•  To use the camera as an access point, choose [Switch Network] on the 
screen displayed when you establish a connection, and then choose 
[Camera Access Point Mode].
•  When reconnecting via a previous access point, connect the target 
device to the access point in step 4.
•  To switch access points, choose [Switch Network] on the screen 
displayed when you establish a connection, and then follow the 
procedure in “Connecting to WPS-Compatible Access Points” from step 5 
(

=
  130).
•  All images in the camera can be viewed from the connected 
smartphone when you choose [Yes] in step 7. To keep camera 
images private, so that they cannot be viewed from the smartphone, 
choose [No] in step 7.
•  T
o change privacy settings for smartphones added to the list, 
choose the smartphone whose settings you want to change from 
[Edit a Device] in step 3, and then choose [View Settings].
•  To add multiple devices, repeat this procedure from the first step.
•  For better security, you can require password input on the screen in step 3 
by accessing MENU ( =
  26) and choosing [3] tab > [Wi-Fi Settings] > 
[Password] > [On]. In this case, in the password field on the device in \
step 4, 
enter the password displayed on the camera.
•  Once you have assigned a connection destination to Touch Actions ( =
  106), 
you can prepare the camera to reconnect to the destination simply by dra\
gging 
across the screen with the assigned gesture.
 
						

							138
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 
zWhen the target camera has been added 
successfully, the image transfer screen 
will be displayed. Proceed to “Sending 
Images” (=
  139).
•  To add multiple cameras, repeat this procedure from the first step.
•  Once a camera is added, the camera name will be displayed on the screen \
in 
step 3. To connect to a camera again, simply choose the camera name from 
the list.
•  Once you have assigned a connection destination to  T
ouch Actions (=
  106), 
you can prepare the camera to reconnect to the destination simply by dra\
gging 
across the screen with the assigned gesture.
 Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•  Only Canon-brand cameras equipped with a Wi-Fi function can be connected\
 
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot 
be connected to if they do not have a Wi-Fi function. You cannot connect to 
DIGIT
AL IXUS WIRELESS cameras with this camera.
1  Access the Wi-Fi menu (=  128 ).
2 Choose camera.
 
zPress the  buttons to 
choose [4], and then press the  
button.
 3  Choose [Add a Device].
 
zPress the  buttons to choose 
[Add a Device], and then press the < m> 
button.
 
zFollow steps 1 – 3 on the target camera 
too.
 
zCamera connection information will be 
added when [Start connection on target 
camera] is displayed on both camera 
screens.
 
						

							139
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 
zAfter sending images to a camera or 
smartphone, [Transfer completed] will be 
displayed, and the display will return to 
the image transfer screen.
•  For movies that you do not compress (=
   11 3 ), a separate, 
compressed file is sent instead of the original file. Note that this 
may delay transmission, and the file cannot be sent unless there is 
enough space for it on the memory card.
•  Keep your fingers or other objects off the Wi-Fi antenna area ( =  3). 
Covering this may decrease the speed of your image transfers.
•  Depending on the condition of the network you are using, it may take a l\
ong 
time to send movies. Be sure to keep an eye on the camera battery level.\
•  When sending movies to smartphones, note that the supported image qualit\
y 
varies depending on the smartphone. For details, refer to the smartphone\
 user 
manual.
•  To disconnect from the camera, press the  button.  After the 
confirmation message, press the < q> buttons to choose [OK], and 
then press the  button. You can also use the smartphone to end the 
connection.
•   On the screen, wireless signal strength is indicated by the following ic\
ons.
[
] high, [] medium, [] low, [] weak
•  Sending images to Web services will take less time when resending images 
you have already sent that are still on the CANON iMAGE GATEWA Y
 server.
  Sending Images
Send images wirelessly to destinations registered on the camera as follo\
ws.
Note that when images are sent to a computer, the computer is used 
instead of the camera (=
  142).
 Sending Images Individually
1  Choose an image.
 
zDrag left or right across the screen to 
choose an image to send.
2  Send the image.
 
zPress the  buttons to choose 
[Send this image], and then press the 
 button.
 
zWhen uploading to YouTube, read the 
terms of service, choose [I Agree], and 
press the  button.
 
zImage transfer will begin. The screen 
darkens during image transfer.
 
zAfter images are uploaded to a Web 
service, [OK] is displayed. Press the 
 button to return to the playback 
screen.
 
						

							140
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Sending Multiple Images
1  Choose [Select and send].
 
zPress the  buttons to choose 
[Select and send], and then press the 
 button.
2 Choose images.
 
zPress the  buttons to 
choose an image to send, and then press 
the  button. [
] is displayed.
 
zTo cancel selection, press the < m> 
button again. [] is no longer displayed.
 
zRepeat this process to choose additional 
images.
 
zAfter you finish choosing images, press 
the  button.
3  Send the images.
 
zPress the  buttons to choose 
[Send], and then press the  button.
 Choosing the Image Resolution (Size)On the image transfer screen, choose [] by pressing the  
buttons, and then press the  button. On the next screen, choose the 
resolution by pressing the < o> buttons, and then press the  
button.
•  To send images at original size, select [No] as the resizing option.
•  Choosing [
] or [] will resize images that are larger than the selected 
size before sending.
•  Movies cannot be resized.