Canon PowerShot N100 User Manual

							91
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Still Images
 Checking People Detected in Face ID
If you switch the camera to simple information display mode (=  89), the 
names of up to five detected people registered in Face ID ( =  41) will be 
displayed.
 
zPress the  button several times until 
simple information display is activated, 
and then press the < q> buttons to 
choose an image.
 
zNames will be displayed on detected 
people.
•   If you prefer not to have names displayed on images shot using Face ID, \
choose MENU ( =  26) > [1] tab > [Face ID Info] > [Name Display] > [Off].
 Browsing and Filtering Images
Still ImagesMovies
  Navigating through Images in an Index
By displaying multiple images in an index, you can quickly find the imag\
es 
you are looking for.
1  Display images in an index.
 
zMove the zoom lever toward < g> to 
display images in an index. Moving the 
lever again will increase the number of 
images shown.
 
zTo display fewer images, move the zoom 
lever toward . Fewer images are 
shown each time you move the lever.
2  Choose an image.
 
zPress the  buttons to 
choose an image.
 
zAn orange frame is displayed around the 
selected image.
 
zPress the  button to view the 
selected image in single-image display.
•   To deactivate the 3D display effect (shown if you hold down the < o> 
buttons), choose MENU ( =  26) > [1] tab > [Index Effect] > [Off].
 
						

							92
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 Touch-Screen Operations
 
zPinch in to switch from single-image 
display to index display.
 
zTo view more thumbnails per screen, 
pinch in again.
 
zDrag up or down on the screen to scroll 
through displayed images.
 
zTo view fewer thumbnails per screen, 
spread your fingers apart.
 
zTouch an image to choose it, and touch it 
again to view it in single-image display.
Still ImagesMovies
   Finding Images Matching Specified 
Conditions
Find desired images quickly on a memory card full of images by filtering\
 
image display according to your specified conditions. You can also protect 
(=
  98) or delete (=  101) these images all at once.
Name Displays images of a registered person (
=  42).
PeopleDisplays images with detected faces.
Shot Date Displays the images shot on a specific date.
FavoritesDisplays images tagged as favorites (
=  104).
Still image/MovieDisplays only still images or movies.
Displays still images, movies, or movies shot in 
[] mode (=  55).
1  Choose a search condition.
 
zPress the  button, choose 
[] in the menu, and choose a condition 
(=  25).
 
zWhen you have selected [], [], or 
[], choose the condition by pressing 
the  buttons on the 
screen displayed, and then press the 
 button.
 
						

							93
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
2  View the filtered images.
 
zImages matching your conditions are 
displayed in yellow frames. To view 
only these images, press the < q> 
buttons.
 
zTo cancel filtered display, choose [] in 
step 1.
Still Images
 Viewing Individual Images in a Group
Images shot consecutively ( =  40) or in [] mode (=  40, 62) are 
displayed as a group but can also be viewed individually.
1  Choose a grouped image.
 
zPress the  buttons to choose an 
image labeled with [].
2 Choose [].
 
zPress the  button, and then choose 
[] in the menu (=  25).
3  View images in the group 
individually.
 
zPressing the  buttons will display 
only images in the group.
 
zTo cancel group playback, press the 
 button, choose [] in the menu, 
and press the  button again 
(=
  25).
•  During group playback (step 3), you can use the menu functions accesse\
d 
by pressing the  button. You can also browse through images quickly 
“Navigating through Images in an Index” ( =
  91) and magnify them 
“Magnifying Images” ( =  95). By choosing [All Images in Group] for 
“Protecting Images” (=  98), “Erasing Multiple Images at Once” ( =  101), 
“Adding Images to the Print List (DPOF)” (=  177), or “Adding Images to a 
Photobook” ( =  180), all images in the group can be manipulated at once.
•   To ungroup images so that they are displayed only as single still images,\
 
choose MENU ( =
  26) > [
1] tab > [Group Images] > [Off] (
=  26). 
However, grouped images cannot be ungrouped during individual playback.
•  Simultaneous display in [
] mode as described in step 2 of “Enjoying a 
Variety of Images from Each Shot (Creative Shot)” (=  62) is only shown 
immediately after you shoot.
•  You can also view grouped images individually by touching [
] on the 
screen in step 1 and then touching [].
 
						

							94
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 Editing Face ID Information
If you notice that a name is incorrect during playback, you can change i\
t or 
erase it.
However, you cannot add names for people who are not detected by Face 
ID (names are not displayed), and for people whose names have been 
erased.
 Changing Names
1  Access the setting screen.
 
zPress the  button and choose 
[Face ID Info] on the [
1] tab (=  26).
 
zPress the  buttons to choose 
[Edit ID Info], and then press the  
button.
 2  Choose an image.
 
zFollowing the procedure in “Checking 
People Detected in Face ID” ( =  91), 
choose an image and press the < m> 
button.
 
z An orange frame is displayed around the 
selected face. When multiple names are 
displayed in an image, press the < q> 
buttons to choose the name to change, 
and then press the < m> button.
 3  Choose the editing option.
 
zPress the  buttons to 
choose [Overwrite], and then press the 
 button.
4  Choose the name of the person 
to overwrite with.
 
zFollow step 2 in “Overwriting and Adding 
Face Information” (=  45) to choose 
the name of the person you want to 
overwrite with.
•  You can also access the [Edit ID Info] screen by touching an image on the\
 
screen in step 2, touching [] to display the orange frame, and then 
touching the face to overwrite its name.
•  You can also choose editing options by touching them in step 3.
 Erasing Names 
zFollowing step 3 in “Changing Names” 
(=  94), choose [Erase] and press the 
 button.
 
zAfter [Erase?] is displayed, press the 
 buttons to choose [OK], and 
then press the  button.
•  You can also erase names by touching [OK] after [Erase?] is displayed.
 
						

							95
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Image Viewing Options
Still Images
   Magnifying Images
1  Magnify an image.
 
zMoving the zoom lever toward < k> will 
zoom in and magnify the image, and 
[
] is displayed. You can magnify 
images up to about 10x by continuing to 
hold the zoom lever.
 
zTo zoom out, move the zoom lever 
toward . You can return to single-
image display by continuing to hold it.
2  Move the display position and 
switch images as needed.
 
zTo move the display position, press the 
 buttons.
 
zWhile [] is displayed, you can switch 
to [] by pressing the  button. 
To switch to other images while zoomed, 
press the  buttons. Press the 
 button again to restore the original 
setting.
Approximate Position of  Displayed Area
• You can return to single-image display from magnified display by pressing\
 the 
 button.
 Touch-Screen Operations
 
zSpread your fingers apart (pinch out) to 
zoom in.
 
zYou can magnify images up to about 10x 
by repeating this action.
 
zTo move the display position, drag across 
the screen.
 
zPinch in to zoom out.
 
zTouch [] to restore single-image 
display.
 
						

							96
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Still ImagesMovies
   Viewing Slideshows
 Automatically play back images from a memory card as follows. Each 
image is displayed for about three seconds.
 
z Press the  button, choose [.] in 
the menu, and choose the desired option 
(=
  25).
 
zThe slideshow will start after [Loading 
image] is displayed for a few seconds.
 
zPress the  button to stop the 
slideshow.
•  The camera’s power-saving functions ( =
  23) are deactivated 
during slideshows.
•  To pause or resume slideshows, press the < m> button.
•  You can switch to other images during playback by pressing the < q> 
buttons. For fast-forward or fast-rewind, hold the < q> buttons down.
•  In image search mode ( =
  92), only images matching search conditions are 
played.
•  Slideshows can also be started by using Touch Actions ( =
  106).
 Changing Slideshow SettingsYou can set up slideshows to repeat, and you can change the transitions 
between images and the display duration of each image.
1  Access the setting screen.
 
zPress the  button, and then 
choose [Slideshow] on the [
1] tab 
(=
  26).
2  Configure the settings.
 
zChoose a menu item to configure, and 
then choose the desired option ( =  26).
 
zTo start the slideshow with your settings, 
choose [Start] and press the  
button.
 
zTo return to the menu screen, press the 
 button.
 
						

							97
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Still Images
   Auto Playback of  Related Images (Smart 
Shuffle)
Based on the current image, the camera offers four images that you may 
wish to view. After you choose to view one of those images, the camera 
offers four more images. This is an enjoyable way to play back images in 
an unexpected order. Try this feature after you have taken many shots, in 
many kinds of scenes.
1  Choose Smart Shuffle.
 
zPress the  button, and then choose 
[] in the menu (=  25).
 
zFour candidate images are displayed.
2  Choose an image.
 
zPress the  buttons to 
choose the image you want to view next.
 
zYour chosen image is displayed in the 
center, surrounded by the next four 
candidate images.
 
zFor full-screen display of the center 
image, press the  button. To restore 
the original display, press the < m> 
button again.
 
zPress the  button to restore 
single-image display.
•  Only still images shot with this camera are played back using Smart 
Shuffle.
•  Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
-  An unsupported image is currently displayed
-  Images are shown in filtered display ( =
  92)
-  During group playback ( =  93)
• On the screen in step 2, touching an image above, below, or on either side will 
show your chosen image in the center, surrounded by the next four candidate 
images.
•  For full-screen display of the center image in step 2, touch that image.\
 To 
restore the original display , touch the screen again.
 
						

							98
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Still ImagesMovies
   Protecting Images
Protect important images to prevent accidental erasure by the camera 
(=  101).
 
zPress the  button, and then choose 
[
: ] in the menu (=  25). [Protected] 
is displayed.
 
zTo cancel protection, repeat this process 
and choose [
:] again, and then press 
the  button.
•  Protected images on a memory card will be erased if you format the 
card (=
  156).
•  Protected images cannot be erased using the camera’s erasure function. To 
erase them this way, first cancel protection.
Using the Menu
1  Access the setting screen.
 
zPress the  button and choose 
[Protect] on the [
1] tab (=  26).
 2  Choose a selection method.
 
zChoose a menu item and an option as 
desired ( =  26).
 
zTo return to the menu screen, press the 
 button.
 Choosing Images Individually
1 Choose [Select].
 
zFollowing step 2 in “Using the Menu” 
(=  98), choose [Select] and press the 
 button.
 2  Choose an image.
 
zPress the  buttons to choose an 
image, and then press the < m> button. 
[
] is displayed.
 
zTo cancel selection, press the < m> 
button again. [] is no longer displayed.
 
zRepeat this process to specify other 
images.
 
						

							99
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
3  Protect the image.
 
zPress the  button. A 
confirmation message is displayed.
 
zPress the  buttons to choose 
[OK], and then press the  button.
•  Images will not be protected if you switch to Shooting mode or turn 
the camera of f before finishing the setup process in step 3.
• 
You can also select or clear images by touching the screen in step 2, and\
 you 
can access the confirmation screen by touching [].
•  You can also protect images by touching [OK] on the screen in step 3.
 Selecting a Range
1  Choose [Select Range].
 
zFollowing step 2 in “Using the Menu” 
(=  98), choose [Select Range] and 
press the  button.
 2  Choose a starting image.
 
zPress the  button.
 
zPress the  buttons to choose an 
image, and then press the < m> button.
 3  Choose an ending image.
 
zPress the  button to choose [Last 
image], and then press the < m> button.
 
						

							100
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 
zPress the  buttons to choose an 
image, and then press the < m> button.
 
zImages before the first image cannot be 
selected as the last image.
4  Protect the images.
 
zPress the  button to choose 
[Protect], and then press the  
button.
•  You can also display the screen for choosing the first or last image by t\
ouching 
an image on the top screen in steps 2 or 3.
•  You can also protect images by touching [Protect] on the screen in step 4\
.
Specifying All Images at Once
1  Choose [Select All Images].
 
zFollowing step 2 in “Using the Menu” 
(=  98), choose [Select All Images] and 
press the  button.
2  Protect the images.
 
zPress the  buttons to choose 
[Protect], and then press the  
button.
•  To cancel protection for groups of images, choose [Unlock] in step 4 of 
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
•  You can also protect or unlock images by touching [Protect] or [Unlock] o\
n the 
screen in step 2.