Canon PowerShot N100 User Manual

							111
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
• For some images, correction may be inaccurate or may cause 
images to appear grainy.
•  Images may look grainy after repeated editing using this function.
•  If [Auto] does not produce the expected results, try correcting images u\
sing 
[Low], [Medium], or [High].
•  You can also configure this setting by touching [ q][r] on the screen in step 3.
Still Images
    Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the 
corrected image as a separate file.
1  Choose [Red-Eye Correction].
 
zPress the  button, and then 
choose [Red-Eye Correction] on the [
1] 
tab (=
  26).
2  Choose an image.
 
zPress the  buttons to choose an 
image.
3  Correct the image.
 
zPress the  button.
 
zRed-eye detected by the camera is now 
corrected, and frames are displayed 
around corrected image areas.
 
zEnlarge or reduce images as needed. 
Follow the steps in “Magnifying Images” 
(=
  95).
 4  Save as a new image and 
review.
 
zPress the  buttons to 
choose [New File], and then press the 
 button.
 
zThe image is now saved as a new file.
 
zFollow step 5 in “Resizing Images” 
(=  108).
•    Some images may not be corrected accurately.
•  To overwrite the original image with the corrected image, choose 
[Overwrite] in step 4. In this case, the original image will be erased.
•  Protected images cannot be overwritten.
•  You can save images by touching [New File] or [Overwrite] on the screen i\
n 
step 4.
 
						

							11 2
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Movies
  Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
 
zFollowing steps 1 – 5 in “Viewing” 
(=  87), choose [*] and press the 
 button.
 
zThe movie editing panel and editing bar 
are now displayed.
2  Specify portions to cut.
 
zPress the  buttons to choose 
[] or [].
 
zTo view the portions you can cut 
(identified by [] on the screen), press 
the  buttons to move []. Cut 
the beginning of the movie (from []) 
by choosing [], and cut the end of the 
movie by choosing [].
 
zIf you move [] to a position other than a 
[] mark, in [] the portion before the 
nearest [] mark on the left will be cut, 
while in [] the portion after the nearest 
[] mark on the right will be cut.
Movie Editing Panel
Movie Editing Bar
3  Review the edited movie.
 
zPress the  buttons to choose 
[], and then press the  button. 
The edited movie is now played.
 
zTo edit the movie again, repeat step 2.
 
zTo cancel editing, press the < o> 
buttons to choose []. Press the < m> 
button, press the  buttons to 
choose [OK], and then press the  
button again.
4  Save the edited movie.
 
zPress the  buttons to choose 
[], and then press the  button.
 
zPress the  buttons to 
choose [New File], and then press the 
 button.
 
zThe movie is now saved as a new file.
 
zChoose [Save w/o Comp.], and then 
press the  button.
 
						

							11 3
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
• To overwrite the original movie with the cut one, choose [Overwrite] 
in step 4. In this case, the original movie will be erased.
•  If the memory card lacks sufficient space, only [Overwrite] will be 
available.
•  Movies may not be saved if the battery pack runs out while saving 
is in progress.
•  When editing movies, you should use a fully charged battery pack or 
an AC adapter kit (sold separately,  =
  162).
  Reducing File Sizes
Movie file sizes can be reduced by compressing movies as follows.
 
zOn the screen in step 2 of “Editing 
Movies”, choose []. Choose [New File], 
and then press the < m> button.
 
zChoose [Compress & Sav.], and then 
press the  button.
•  Compressed movies are saved in [] format.
•  [] movies cannot be compressed.
•  Edited movies cannot be saved in compressed format when you choose 
[Overwrite].
•  However, you can compress and save edited movies as new files by choosing 
[Compress & Sav .].
Movies
 Editing Digest Movies
Individual chapters (clips) (
=  55) recorded in [] mode can be erased, 
as needed. Be careful when erasing clips, because they cannot be 
recovered.
1  Select the clip to erase.
 
zFollow steps 1 – 2 in “Viewing Short 
Movies Created When Shooting Still 
Images (Digest Movies)” ( =
  90) to 
play a movie created in [] mode, and 
then press the  button to access the 
movie control panel.
 
zPress the  buttons to choose 
[] or [], and then press the  
button.
2 Choose [].
 
zPress the  buttons to choose 
[], and then press the  button.
 
zThe selected clip is played back 
repeatedly.
3 Confirm erasure.
 
zPress the  buttons to choose 
[OK], and then press the  button.
 
zThe clip is erased, and the short movie is 
overwritten.
•  [] is not displayed if you select a clip when the camera is connected to \
a 
printer.
 
						

							11 4
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 1  Choose an image.  
 
zChoose an image in single-image display.  
 
zThemes available in step 3 will vary 
depending on image shooting dates and 
Face ID information.
 2  Access the home screen.
 
zPress the  button.
 
zAfter [Busy] is displayed, the home 
screen is displayed.
3  Preview the album.
 
zPress the  buttons to choose 
[Date], [Person’s name], or [Event] as the 
album theme, and then press the < m> 
button.
 
zAfter [Loading] is displayed for a few 
seconds, an album preview is played.
 4  Save the album.
 
zPress the  buttons to choose 
[Save Album as Movie], and then press 
the  button.
 
zOnce the album is saved, [Saved] is 
displayed.
Still ImagesMovies
 Viewing Albums (Stor y Highlights)
You can create an album of automatically selected images organized by 
dates or people’s names. These images are combined into a slideshow that 
can be saved as a short movie of about 2 – 3 minutes.
Before using this feature, make sure the battery pack is fully charged.
Choosing Themes for Albums
Press the <
> button to access the home screen and choose themes 
for the camera to use when selecting album elements. Tagging images as 
favorites makes it easier to add them when creating albums ( =
  104).
DateCreates an album of images shot on the same day. 
The current image before you access the home screen serves as the 
basis for the others selected, which are shot on the same day.
Person’s 
name Can be used to create monthly albums of people, such as albums of 
children as they grow up. 
Subjects whose Face ID information you registered before shooting 
may be selected for albums. 
Subjects in the current image before you access the home screen serve 
as the basis for others selected, which are shot in the same month.
Event A good choice for albums of vacations, parties, or other events. 
Creates albums of event shots older or newer than the image selected 
before you access the home screen.
Custom Images based on your specified image, shooting date, or people.
 
						

							11 5
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
Still ImagesMovies
Creating Your Own Albums
1  Choose to create a Custom album.
 
zFollowing steps 1 – 3 in “Viewing Albums 
(Story Highlights)” ( =   11 4), choose 
[Custom] and press the   button.
2  Choose a selection method.
 
zChoose [Image Selection], [Date 
Selection], or [Person Selection], and 
then press the  button.
3  Choose album elements.
 
zChoose images, dates, or people, and 
then press the  button.
 
zSelected images, dates, or people are 
indicated by [].
 
zAfter selecting images under [Image 
Selection], press the  button. 
 
zAfter selecting dates or people under 
[Date Selection] or [Person Selection], 
press the  button.
5  Play the album ( =  20).
• Albums cannot be created from these images. 
- Images from other cameras 
-  Movies other than digest movies
•  Albums cannot be saved unless there is enough space on the memory card.
•  Individual chapters can be edited ( =   11 3).
•  You can specify the color effect in step 3 by choosing [Change Color Effect] 
and pressing the < m> button. Press the  buttons to choose a color 
ef fect, and then press the  button to preview the album with the ef
fect. 
•  You can also play albums by choosing [List of Albums] on the Story Highlights 
home screen, pressing the < m> button, choosing a listed album, and 
pressing the < m> button again. 
•  When the lens is out, you can retract it quickly by pressing the <
> button.
 
						

							11 6
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
4  Choose a color effect.
 
zPress the  buttons to choose 
a color effect, and then press the  
button.
 
zThe preview is displayed with your 
selected color effect applied.
5  Save the album.
 
zFollow step 4 in “Viewing Albums (Story 
Highlights)” ( =   11 4) to save albums.
• Up to 40 images can be selected if you choose [Image Selection]. The second 
time you create a custom album, [Select images based on previous setting\
s?] 
is displayed.  To use previously selected images as the basis, choose [Yes]. 
The previous images are labeled with [
], and multiple images are displayed 
at once.
•  Up to 15 dates can be selected if you choose [Date Selection].
•  After the preview, you can change the color effect by choosing [Change Color 
Ef fect]. The screen in step 4 is displayed again.
•  The color ef fect may not be applied to some images.
 
						

							11 7
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
  Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible device\
s, and use the camera with Web services
What You Can Do with Wi-Fi .........................11 8Uploading Images to Web Services .................... 11 8
Sending Images to a Smartphone ....................... 11 9
Sending Images to a Computer .......................... 11 9
Printing Images Wirelessly .................................. 120
Sending Images to Another Camera ................... 120
Registering Web Services .............................120Registering CANON iMAGE GATEWAY ............. 121
Registering Other Web Services ......................... 123
Installing CameraWindow on a 
Smartphone ................................................... 124
Preparing to Register a Computer ................ 125
Checking Your Computer Environment ............... 125
Installing the Software ......................................... 125
Configuring the Computer for a 
Wi-Fi Connection (Windows Only) ...................... 127
Accessing the Wi-Fi Menu .............................128Initial Connection via Wi-Fi .................................. 128
After the Initial Wi-Fi Connection ......................... 128
Connecting via an Access Point ...................129Confirming Access Point Compatibility ................ 129
Connecting to WPS-Compatible Access Points .. 130
Connecting to Access Points in the List .............. 134
Connecting without an Access Point ...........135Previous Access  Points ....................................... 137Connecting to Another Camera ....................138
Sending Images .............................................. 139
Sending Images Individually ............................... 139
Sending Multiple Images ..................................... 140
Adding Comments ............................................... 141
Saving Images to a Computer .......................142
Using the <
> Button .................................... 143Registering a Smartphone to the  Button.....143
Registering Image Sync to the  Button ........ 144
Clearing Registered Destinations ........................ 145
Sending Images Automatically 
(Image Sync) ................................................. 145
Initial Preparations .............................................. 145
Sending Images .................................................. 146
Geotagging Images on the Camera ..............147Shooting Remotely .............................................. 148Editing or Erasing Wi-Fi Settings .................149Editing Connection Information ........................... 149
Returning the Wi-Fi Settings to Default ............... 150
 
						

							11 8
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 Uploading Images to Web Ser vices
Images can be sent to social network services and other Web services 
via CANON iMAGE GATEWAY*. Unsent images on the camera can also 
be sent automatically to a computer or Web service via CANON iMAGE 
GATEWAY.
*  CANON iMAGE GATEWAY is an online photo service available to those who have 
purchased this product.
Steps in sending images
SNS, video-
sharing sites,  e-mail
Access point
Camera Computer or smartphone 
browsersCANON iMAGE GATEWAY
  Register Web services (
=  120)  Connect via an access point (
=  129)  Send images (
=  139)*
*   You can send images to a computer or Web service.
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi® product. You can wirelessly connect to 
and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be 
referred to as Wi-Fi.
Sending images via Wi-Fi requires some initial preparation on the camera\
 
and target devices. Preparations and methods of sending images vary 
depending on the destination.
Note that before using Wi-Fi, you will need to register a camera nicknam\
e 
on the camera (=
  128).
•  Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN) 
Precautions” ( =
  208) and “Security Precautions” ( =  209).
• Wi-Fi is a brand name that indicates interoperability certification of w\
ireless 
LAN devices.
 
						

							11 9
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
  Sending Images to a Smartphone
Send images to smartphones and tablet computers that have Wi-Fi 
functions. You can also shoot remotely and geotag your shots from a 
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatib\
le 
devices are collectively referred to as “smartphones”.
Steps in sending images
App Store/
Google Play
Smartphone
Tablet computer
Access point
Camera
CameraWindow
  Install CameraWindow on a smartphone (
=  124)  Connect directly (=  135) or via an access point ( =  129)  Send images (=  139)
 Sending Images to a Computer
Use the software to wirelessly send images from the camera to a computer\
.
Steps in sending images
Camera
Computer
Access point Internet
CameraWindow
  Check your computer environment (
=  125)  Download and install the software (=  125)  Configure the computer for a Wi-Fi connection (Windows only,  =  127)  Connect via an access point (=  129)  Save images to the computer (=  142)
 
						

							120
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Hybrid Auto / 
Dual Capture Mode
 Printing Images Wirelessly
Send images wirelessly to a PictBridge-compatible printer (supporting D\
PS 
over IP) to print them.
Steps in printing images
CameraPrinter
Access point
  Connect directly ( =  135) or via an access point ( =  129)  Print images (=  171)
 Sending Images to Another Camera
Use the Wi-Fi function to send images between Canon-brand cameras.
Steps in sending images
Camera Camera
  Connect to another camera (=  138)  Send images (=  139)
 Registering Web Ser vices
Use a smartphone or computer to add to the camera Web services that you 
want to use.
• A smartphone or computer with a browser and Internet connection is 
required to complete camera settings for CANON iMAGE GATEWAY

 and 
other Web services.
•  Check the CANON iMAGE GATEWAY website for details on browser 
(Microsoft Internet Explorer, etc.) requirements, including settings and 
version information.
•    For information on countries and regions where CANON iMAGE GATEWA

Y 
is available, visit the Canon website (http://www.canon.com/cig/).
•  You must have an account with Web services other than CANON iMAGE 
GA

TEWAY
  if you desire to use them. For further details, check the 
websites for each Web service you want to register.
•  Separate ISP connection and access point fees may be applicable.