Canon Pixma Mx532 User Guide

							Bluetooth settings Screen1.
Device name
Displays the device name of the printer to which the Bluetooth unit is attached.
2.
Access refusal
Selecting  ON will disable searching of this printer by a Bluetooth-compatible device.
3.
Security settings
Select  Enable  and then specify the security mode to activate the passkey set on the  Passkey screen.
4.
Passkey
You can change the passkey. The passkey refers to an identification number to be determined. It is used
to prevent unwanted access from other Bluetooth devices. The initial value is set to "0000".
Device name Screen
Allows you to set the device name of the printer on a Bluetooth device.
When you select  MX530 series-2, the printer name displayed on the Bluetooth device is  Canon MX530
series-2 .
The initial value is set to  MX530 series-1.
Access refusal Screen
When you search from a Bluetooth device, you can enable or disable the display of the printer name.
•
ON
Disables searching from a Bluetooth device.
•
OFF (Default setting)
Enables searching and printing from a Bluetooth device.
181
 
						

							Security settings Screen•
Enable
Selecting  Enable allows you to choose either of the security modes below.
◦
Mode 3 (recommend)
This mode is activated on link level enforced security.
The passkey will be required when a Bluetooth device communicates with the printer. Normally
select this mode.
◦
Mode 2
This mode is activated on service level enforced security.
The passkey will be required when printing through the Bluetooth communication.
After setting the security mode, we recommend making a trial print through Bluetooth communication.
If printing does not start, change the security mode and try again.
Setting a passkey will prevent unwanted access from other Bluetooth devices. You can change the
passkey on the  Passkey screen.
•
Disable (Default setting)
When you register the printer, you are not required to input a passkey.
Passkey Screen
When you select  Enable on the  Security settings  screen, you are required to set a passkey to register
the printer on other Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey.
182
 
						

							SpecificationsCommunication
methodBluetooth v2.0Maximum Speed1.44 MbpsOutputBluetooth Power Class 2Communication
distanceLine-of-sight distance: approx. 33 ft./10 m *
* It may vary depending on factors including the presence of obstacles betweencommunication equipment, radio wave conditions, the presence of magnetic fields around
microwave ovens and locations where electrostatic and radio interference occur, the types of
software and operating systems used, and receiver sensitivity and antenna performance of
communication equipment.ProfileSPP (Serial Port Profile)
OPP (Object Push Profile)
BIP (Basic Imaging Profile)
HCRP (Hardcopy Cable Replacement Profile)Compatible PCsA computer in which an internal Bluetooth module is installed or a computer to which an
optional Bluetooth adapter (available from various manufacturers) is attached.
OS/Software:
Microsoft Windows 8 (Satisfying any one of the following conditions is needed)•
The   Bluetooth Devices  icon is displayed on the notification area on the desktop
•
Bluetooth Stack for Windows by Toshiba Version 9.10.00 or later is installed
Microsoft Windows 7 (Satisfying any one of the following conditions is needed)
•
Add a Bluetooth Device  is displayed in Hardware and Sound  under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 7.00.00 or later is installed
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
•
Bluetooth Devices  is displayed in Hardware and Sound  under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
•
Windows XP SP2 or later is installed, and  Bluetooth Devices is displayed in Printers
and Other Hardware  under Control Panel
•
Bluetooth Stack for Windows by Toshiba Version 3.00.10 or later is installed
Frequency band2.4 GHz band (2.400 GHz to 2.4835 GHz)Power supplySupplied from the USB flash drive port on the printer, DC 4.4 V to 5.25 VMaximum power
consumption500 mW (MAX)Operating temperature5 to 35°C (41 to 95°F)Operating humidity10 to 90% RH (no condensation)
183
 
						

							Dimensions (Width x
Depth x Height)18.5 (W) x 47.5 (D) x 8.7 (H) mm (with cap attached)
0.73 (W) x 1.87 (D) x 0.35 (H) inchesWeightApprox. 7 g (0.25 oz)
184
 
						

							Copying
Making Copies Basic
Setting Items for Copying
Reducing or Enlarging a Copy
Two-Sided Copying
About Special copy Menu
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Copying Thick Originals Such as Books
Copying without Borders
Collated Copying
185
 
						

							Making CopiesThis section describes the basic procedure to perform standard copying.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Press the  COPY button.
The Copy standby screen is displayed.
Note
•
When  ON is selected for  Copy on ECO (2-sided) , the Two-sided copy standby screen is
displayed as shown below. You can copy two original pages or a two sided page onto the both
sides of a single sheet of paper.
Follow the procedure below to deactivate two-sided copying temporarily.
1.
Press the  Menu button.
2.
Use the  button to select  2-sided, then press the  OK button.
3.
Use the  button to select  OFF, then press the  OK button.
If you do not use two-sided copying as a default, change the copy setting from  ECO (2-sided).
About ECO settings
4.
Load the original document on the platen glass or in the ADF.
5.
Confirm the page size and magnification.
1.
Magnification
2.
Page size
Note
•
To change or confirm the page size, magnification, or other settings, press the  Menu button, then
use the 
 button to display the desired setting item.
Setting Items for Copying
•
Press the  COPY button to reset the magnification to 100%.
6.
Use the  (-)  (+) button or the Numeric buttons to specify the number of copies.
186
 
						

							7.Press the Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass or from the document output slot after copying is complete.
Important
•
If you load the original on the platen glass, do not open the document cover or remove the original while  Scanning...  is displayed on the screen.
•
If you load the original in the ADF, do not move the original until copying is complete.
Note
•
To cancel copying, press the  Stop button.
•
If you load the original on the platen glass, you can add the copying job while printing.
Adding the Copying Job (Reserve copy)
Adding the Copying Job (Reserve copy) If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can reserve copy.
Load the original on the platen glass and press the same button (the  Color button or the  Black button) as
the one which you previously pressed.
Important
•
When you load the original on the platen glass, move the document cover gently.
Note
•
When  Image quality  is set High, or you load the original in the ADF, you cannot add the copying job.
•
When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
•
If you press the  Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you select  Cancel all reserv. then press the OK button, you can
cancel copying all scanned data. If you select  Cancel last reserv., then press the OK button, you
can cancel the last copying job.
•
If you set a document of too many pages to reserve copy,  Memory is full may appears on the LCD.
Press the  OK button and wait a while, then try copying again.
•
If Try again  appears on the LCD when scanning, press the  OK button, then press the  Stop button to
cancel copying. After that, copy the documents that have not been finished copying.
187
 
						

							Setting Items for CopyingYou can change the copy settings such as the page size, media type, and intensity.Press the  Menu button, use the 
 button to select a setting item, then press the  OK button.
Use the 
 button to adjust each setting item, then press the  OK button. The next setting item is
displayed.
The LCD returns to the Copy standby screen when all the settings are complete.
Note
•
The * (asterisk) on the LCD indicates the current setting.
•
Some settings cannot be specified in combination with the setting of other setting items or the copymenu.
•
The settings of the page size, media type, etc. are retained even if the machine is turned off.
•
Enlarge/Reduce
Select the reduction/enlargement method.
Reducing or Enlarging a Copy
Ex:
Note
•
This setting item is displayed under the following conditions.
•
When standard copying is selected
•
When  2-sided copy  or Borderless copy  is selected for Special copy
•
Copy intensity
Change the intensity.
Ex:
Note
•
If you select  Auto adjust, load the original on the platen glass.
•
If you select  Manual adjust , use the  button to decrease the intensity or the  button to
increase it.
•
Page size
Select the page size of the loaded paper.
Ex:
188
 
						

							•Media type
Select the media type of the loaded paper.
Ex:•
Image quality
Select the image quality according to the original.
Ex:
Note
•
If you use  Draft with the media type set to  Plain paper and the quality is not as good as expected,
select  Standard  or High  and try copying again.
•
Select  High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or
white.
•
4-on-1 layout
Select the layout when copying four original pages onto a single sheet of paper by reducing each image.
Four different layouts are available.
Ex:
Note
•
This setting item is displayed only when  4-on-1 copy is selected for  Special copy.
Copying Four Pages to Fit onto a Single Page
•
Collate
Select whether to obtain sorted printouts when making multiple copies of a multi-paged original. Ex:
Note
•
This setting item is displayed under the following conditions.
•
When standard copying is selected
•
When  2-sided copy  is selected for  Special copy
•
2-sided
Select whether to copy two original pages onto the both sides of a single sheet of paper. Ex:
189
 
						

							Note
•
This setting item is displayed under the following conditions.
•
When 2-sided copy  is selected for  Special copy
Two-Sided Copying
•
When ON is selected for  Copy on ECO (2-sided)
About ECO settings
•
Stapling side
Select the stapling side.
Ex:
Note
•
This setting item is displayed under the following conditions.
•
When  2-sided copy  is selected for  Special copy
Two-Sided Copying
•
When ON is selected for  Copy on ECO (2-sided)
About ECO settings
190