Canon Pixma Mx310 Quick Start Guide

27
Printing Photographs Direct ly from a Compliant Device
About PictBridge Print Settings
„Settings on a PictBridge Compliant Device
This section describes the print settings on a  PictBridge compliant device. When operating the 
device, be sure to follow the instructions giv en in the instruction manual of your PictBridge 
compliant device.
z Paper Size and Paper Type Settings
The following sizes and types of printing paper  can be used when printing from a PictBridge 
compliant device.
z Paper size
4 x...

28Printing Photographs Directly from a Compliant Device
zLayout Setting
Various layout options are available.
zBordered/Borderless: You can select whether or not to print an image with a border.
zN-up: You can use this option when printing on sticker paper, or A4- or Letter-sized paper.
Sticker paper: When you select 10 x 15 cm/4 x 6 for Paper size, you can print 16 images 
on a single sheet of paper.
A4- or Letter-sized paper: When you select A4 or 8.5 x 11 (Letter) for Paper size, you can 
print 4...

29 Printing Photographs Directly from a Compliant Device
„Setting on the Machine
This section describes the PictBridge print settings on the machine.
Set the print settings to Default on the PictBridge compliant device when you want to print 
according to the settings on the machine.
zDisplaying the PictBridge Settings Screen and Specifying the Settings
1Turn on the machine.
2Press the Menu button repeatedly until DEVICE SETTINGS appears.
3Press the [ or ] button to select PICTBRIDGE SET, then press the...

30Faxing
Faxing
Preparing the Machine for Fax
Typical examples of connecting the machine are described below. The machine cannot send/receive 
faxes if the connection is incorrect. Connect the machine correctly.
„Methods of Connecting External Devices
zConnecting to an Analog Line
(A) Telephone line (analog)
zConnecting a Telephone or Answering Machine Directly
(A) Telephone or Answering machine
Important
If the Power Disconnects Unexpectedly
If there is a power failure or if you accidentally disconnect...

31 Faxing
zConnecting a Telephone or Answering Machine via a Computer
(A) Computer
(B) Telephone or Answering machine
Users in the UK
If the connector of the external device cannot be connected to the jack on the machine, you will 
need to purchase a B.T. adapter to connect as follows:
Connect the external device line to the B.T. adapter, then connect the B.T. adapter to the   
jack.
Important
Do not connect the machine and external devices in parallel to the same telephone line using a 
splitter (A)....

32Faxing
„Methods of Connecting the Various Lines
The following are some basic connection scheme s that apply when you are connecting to a non-
analog telephone line. These are examples and  are not guaranteed to suit every connecting 
conditions. For details, refer to the instruction  manual supplied with the network device (control 
devices such as an xDSL modem, terminal adapter , or dial-up router) you are connecting to this 
machine.
z Connecting to an xDSL
(A) Digital Subscriber Line
(B) Splitter...

33 Faxing
4Press the [ or ] button to select the telephone line type, then press the OK 
button.
ROTARY PULSE:Suitable for pulse dialing.
TOUCH TONE:Suitable for tone dialing.
5Press the Stop/Reset button.
Note
You cannot use ROTARY PULSE depending on the country or region of purchase.
 

34Faxing
Registering Sender Information
A fax you receive may have information, such as the sender’s name or the company name, the 
sender’s phone or fax number, and the date and time of  the transmission, printed in small type at the 
top of each page. Such sender information is  called Transmit Terminal Identification, or TTI.
You can register your TTI in this machine, so that  the recipient of your fax will know who sent it, and 
when it was sent.
Below is an example of how your sender informat ion...

35 Faxing
„Guidelines for Entering Numbers, Letters, and Symbols
The following characters are assigned to the Numeric buttons.
* SP indicates a space.
Follow the procedure below to enter letters and numbers when you register names and fax/
phone numbers for the sender information or a coded speed dial.
1Press the   button to switch to uppercase letter mode (:A), lowercase letter mode 
(:a), or number mode (:1).
You can see what mode you are in by the character displayed on the top right corner of the...

36Faxing
„Entering the Date and Time
1Press the  FA X button, then press the  Menu button.
2Press the  [ or  ] button to select  USER SETTINGS , then press the OK button two 
times.
3Press the Numeric buttons to enter the da te and time (in 24-hour format), then 
press the  OK button.
Enter only the last two digits of the year.
4Press the  Stop/Reset  button.
„Registering Your Fax/Telephone Number and Name (Sender 
Information)
1Press the  FA X button, then press the  Menu button.
2Press the  [ or  ]...