Canon Pixma Mp630 User Guide

Back button, then repeat the procedure from step 8.
10.Confirm the print image on the DVD/CD, then press the OK button.
Note
Other options
Printing a Specified Area (Trimming) in Using Useful Display Functions
11.Check the print settings, then press the OK button.
The message for preparation is displayed.
Note
Press the Black button for black & white copying.
To change print settings, press the Back button repeatedly until the screen for the setting item
to change is displayed, then change the setting....

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing with CD-LabelPrint from the
Computer
Printing with CD-LabelPrint from the Computer
CD-LabelPrint is bundled application software that allows you to edit and modify data before
printing. Install it on your computer to use it. For information on how to install this software, refer to
your setup manual.
For details on how to print with CD-LabelPrint, refer to its manual.
If you are using Windows, click Start > All...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Printing from a PictBridge Compliant
Device
Printing from a PictBridge Compliant Device
This section describes how to print photos on DVD/CDs (printable discs) from a PictBridge
compliant device.
Important
Depending on your PictBridge compliant device, you may not be able to print on the label side
of DVD/CDs.
For details, refer to the instruction manual of your PictBridge compliant device.
You cannot print on 8 cm DVD/CDs....

5.Select DVD/CD print setting, then press the OK button.
6.Use the  or  button to select Outer circle or Inner circle and use the  or 
button to change the print area.
7.Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/
CD and make sure you set a value smaller than the measured value for the outer
diameter, and a value larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
8.Use...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs
 > Printing Area
Printing Area
Printable DVD/CDs
The printing area of both printable DVDs and CDs is the area excluding the 1 mm area from the
internal and external diameters of the label. 
Recommended printing area
Page top
Page 605 of 805 pages Printing Area
 

Advanced Guide > Printing on DVD/CDs > Troubleshooting
Troubleshooting
An Error Message Is Displayed on the LCD
Message Appears on the Computer Screen
Cannot Print on DVD/CDs
Error Message Appears on a PictBridge Compliant Device
Page top
Page 606 of 805 pages Troubleshooting
 

Advanced Guide > Printing on DVD/CDs > Troubleshooting > An Error Message Is Displayed on the LCD
An Error Message Is Displayed on the LCD
If an error message is displayed on the LCD, take the corresponding action described below.
MessageAction
Open the inner cover, place the CD-R
tray and press OK.
If the Inner Cover is closed when starting DVD/CD
printing, open the Inner Cover with the Scanning Unit
(Cover) closed, set the CD-R Tray, and then press the 
OK
button on the machine.
Do not open or close...

Advanced Guide > Printing on DVD/CDs > Troubleshooting > Message Appears on the Computer Screen
Message Appears on the Computer Screen
Errors About DVD/CD Printing Are Displayed
Message: 1001 Is Displayed
Error Number: 1002 Is Displayed
Message: 1850 Is Displayed
Errors About DVD/CD Printing Are Displayed
Check 1: Is the CD-R Tray placed properly?
Open the Inner Cover, properly place the CD-R Tray again, then press the OK button.
Make sure that you are using the CD-R Tray supplied with the machine (G is...

Error Number: 1002 Is Displayed
Check 1: Place the DVD/CD on the CD-R Tray properly.
Place the DVD/CD on the CD-R Tray properly, then press the OK button on the machine.
Make sure that you are using the CD-R Tray supplied with the machine (G is on the upper
side).
For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray.
Check 2: Unrecognizable DVD/CD may be placed.
Canon recommends that you use DVD/CDs specially processed to be printed on by an inkjet
printer.
Check 3: Is the...

Advanced Guide > Printing on DVD/CDs > Troubleshooting > Cannot Print on DVD/CDs
Cannot Print on DVD/CDs
DVD/CD Printing Does Not Start
CD-R Tray Does Not Feed Properly
CD-R Tray Jammed
DVD/CD Printing Does Not Start
Check 1: Is the CD-R Tray placed properly?
Open the Inner Cover, properly place the CD-R Tray again, then press the OK button.
Use the CD-R Tray supplied with this machine (G is on the upper side).
For details on how to place the CD-R Tray, see Attaching/Removing the CD-R Tray.
Check 2: Is...