Canon Pixma Mp630 User Guide

Brightness
Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the
image. You can also enter a value (-127 to 127).
Contrast
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,
thus softening the image. Moving it to the right will increase the contrast of the image, thus
sharpening the image. You can also enter a value (-127 to 127).
Resolution
Enter the resolution. Specify a value between 50 dpi and 600 dpi....

Advanced Guide > Scanning > Other Scanning Methods > Scanning using the Control Panel (Windows XP Only)
Scanning using the Control Panel (Windows XP Only)
You can scan images via the Control Panel of Windows XP using the WIA driver.
Windows Image Acquisition (WIA) is a driver model implemented in Windows XP. It allows you to scan
documents without using an application. Scan documents from a TWAIN-compliant application to specify
advanced settings for scanning.
1.From the Start menu, select Control...

Resolution
Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Resolution
Picture type
Select the type of scan you want for your document.
Reset
Click to restore the original settings.
6.Click Preview to preview the image.
The preview image appears on the right. Drag  to specify the scan area.
7.Click Next and follow the instructions.
Page top
Page 583 of 805 pages Scanning using the Control Panel (Windows XP Only)
 

Advanced Guide > Printing on DVD/CDs
Printing on DVD/CDs
Printing on the Label Side of DVD/CDs
Troubleshooting
Page top
Page 584 of 805 pages Printing on DVD/CDs
 

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs
Printing on the Label Side of DVD/CDs
Items to Prepare
Cautions When Printing on DVD/CDs
Attaching/Removing the CD-R Tray
Printing on the Label Side of DVD/CDs
Printing from DVD/CD Label
Printing from Photo Data
Printing from Printed Photo
Printing from Film (MP980 series)
Printing with CD-LabelPrint from the Computer
Printing from a PictBridge Compliant Device
Printing Area
Page top
Page 585 of 805 pages Printing on the Label...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Items to Prepare
Items to Prepare
The following items are needed to print on DVD/CDs:
CD-R Tray
G is on the upper side.
8 cm CD-R Adapter
Needed only when printing on 8 cm DVD/CDs.
Attached to the CD-R Tray when shipped.
Important
You cannot print on 8 cm DVD/CDs in the copy mode, in the memory card mode, and from a
PictBridge compliant device. You need to print from the computer to print on 8 cm DVD/CDs.
Printable DVD/CDs...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Cautions When Printing on DVD/CDs
Cautions When Printing on DVD/CDs
Be sure to use the CD-R Tray supplied with this machine. It has an G on the upper side.
Do not print on DVD/CDs that are not compatible with ink-jet printing. The ink will not dry and may
cause problems with the disc itself or devices which the disc is loaded onto.
Do not print on the DVD/CDs recording surface. Doing so will make data recorded on DVD/CDs...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Attaching/Removing the CD-R Tray
Attaching/Removing the CD-R Tray
The external appearance may differ depending on the machine you are using.
Attaching the CD-R Tray
1.Open the Paper Output Tray (A), then open the Inner Cover (B).
2.Place the DVD/CD.
Important
Make sure that there is no dirt on the CD-R Tray before placing the DVD/CD on the CD-R
Tray.
When placing the DVD/CD on the CD-R Tray, do not touch the printing surface...

2.Place the 8 cm disc on the CD-R Tray with the printing surface facing up.
3.Place the CD-R Tray.
Important
Do not attach the CD-R Tray until the message asking you to load the DVD/CD is
displayed. Doing so can damage the machine.
Note
The CD-R Tray may be ejected after a specified period of time has elapsed. In this case,
follow the on-screen instructions to place the CD-R Tray.
4.Insert the CD-R Tray straightly until the arrow () on the Inner Cover is almost aligned
with the arrow () on the CD-R...

1.Pull out the CD-R Tray.
2.Close the Inner Cover.
Important
If the Inner Cover is opened, you cannot print on paper as it will not feed properly. Make
sure that the Inner Cover is closed.
3.Remove the DVD/CD.
Caution
Do not touch the printable surface when removing the disc from the CD-R Tray.
Note
Dry the printing surface sufficiently before removing the disc. If you see printing on the
CD-R Tray or the transparent parts on inner or outer diameter of DVD/CD, wipe them off
after the printing surface is...