Canon Pixma Mg2924 User Guide

4102Cause
The media type and paper size are not set correctly.
Action Press the machine's  Stop button to cancel printing, change the media type or paper size setting, then
print again.•
When the media type is set to  Photo Paper Plus Glossy II:
Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac), or  5"x7" 13x18cm  (Windows)/5 x 7
(Mac).
•
When the media type is set to  Glossy Photo Paper:
Set the paper size to  4"x6" 10x15cm (Windows)/4 x 6 (Mac).
•
When the media...

4103Cause
Cannot perform printing with the current print settings.
Action Press the machine's  Stop button to cancel printing.
Then change the print settings and print again.702
 

5011Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.703
 

5012Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.704
 

5100Cause
Printer error has occurred.
Action Cancel printing and turn off the machine.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the FINE cartridge holder from moving.
If any, remove the materials.
•
Confirm that the FINE cartridges are installed properly.
Push up the FINE cartridge until it clicks into place.
After confirming the conditions above, turn on the machine again.
If the problem is not resolved, contact...

5200Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.706
 

5400Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.707
 

5700Cause
Printer error has occurred.
Action Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.708
 

5B00CausePrinter error has occurred.
Action Contact the service center.709
 

5B01CausePrinter error has occurred.
Action Contact the service center.710