Canon Pixma Ip110 User Guide

Using the Printer with the Access Point ModeBy using the printer as an access point in an environment that does not have wireless LAN router or access
point, or by using the printer as an access point temporarily in an environment that has wireless LAN router
or access point, you can connect the printer to an external device such as a computer or a smartphone and
print from them.
This section describes how to enable the access point mode, the access point name of the printer, and the
security setting....

Perform wireless LAN settings with your external device, then assign the access point name specified
for the printer as a destination.
Note
•
For details on how to perform wireless LAN settings with an external device, refer to the device's instruction manual.
•
When a WPA2-PSK (AES) password is valid on the printer, entering the password is required toconnect an external device to the printer via wireless LAN. Enter the password specified for the
printer.
2.
Start printing from an external device...

•You can change the security setting and the password using IJ Network Tool.If you change the access point mode setting of the printer, also change the access point setting of the
external device such as a computer or a smartphone.
173
 

Initializing the Printer SettingsYou can initialize the printer settings.
Important
•
When using the printer over wireless LAN, note that initialization erases all network settings on theprinter, and printing operation from a computer over network may become impossible. To use the
printer over network, perform setup with the Setup CD-ROM or perform it according to the instructions
on our website.
Follow the procedure below to initialize the printer settings.
1.
Make sure that the printer is turned on....

Disabling the Wireless LAN Function of the PrinterFollow the procedure below to disable the wireless LAN.1.
Make sure that the printer is turned on.
2.
Press and hold the  RESUME/CANCEL  button then release the button when the  POWER
lamp flashes 12 times.
The  Wi-Fi  lamp goes off.
Note
•
When you enable the wireless LAN, press and hold the  RESUME/CANCEL button, then release
the button when the  POWER lamp flashes 10 times.
175
 

Setting the Ink Usage ControlThe ink usage control function allows you to reduce black ink consumption and to produce the black
sections with color inks when printing to plain paper from a computer.
Reducing Black Ink Consumption
Producing the Black Sections with Color Inks
Important
•
The print quality may deteriorate if this function is used.
Reducing Black Ink Consumption This function allows you to reduce the black ink consumption during printing and to allow longer life ofblack ink.
Important
•
This...

- When Custom  is selected for  Print Quality and 2 or  3 is selected for  Quality at the Custom  dialog
box•
This function is not available when  Borderless is selected for  Page Layout in the Page Setup  sheet.
1.
Make sure that the printer is turned on.
2.
Open the printer driver setup window.
3.
Click the Maintenance  tab and then  Ink Usage Control .
4.
Select Use Composite Black (Immediate Measure) .
5.
Click OK.
The specified setting will be used during printing.
Note
•
The confirmation message is...

Information about Network Connection
Useful Information about Network Connection
178
 

Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Printer to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
179
 

Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultEnable/disable LANEnableSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIPv4 IP addressAuto setupIPv6 IP addressAuto setupSet printer name*XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSD (WSD settings)EnableTimeout setting (WSD settings)1 minuteEnable/disable Bonjour (Bonjour settings)EnableService name (Bonjour settings)Canon iP110 seriesLPR protocol settingEnablePictBridge...