Canon Pixma Ip110 User Guide

Registering a Frequently Used Printing ProfileYou can register the frequently used printing profile to  Commonly Used Settings on the Quick Setup  tab.
Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a Printing Profile1.
Open the printer driver setup window
2.
Set the necessary items
From  Commonly Used Settings  on the Quick Setup  tab, select the printing profile to be used and if
necessary, change the settings after...

Important•
To save the page size, orientation, and number of copies that was set in each sheet, click Options...,
and check each item.
Note
•
When you re-install the printer driver or upgrade the printer driver version, the print settings that are already registered will be deleted from  Commonly Used Settings.
Registered print settings cannot be saved and preserved. If a profile is deleted, register the print settings again.
Deleting Unnecessary Printing Profile
1.
Select the printing profile to be...

Setting the Ink Usage ControlThis function allows you to reduce the amount of black ink used and to produce the black sections with color
inks when printing to plain paper.
The procedure for configuring the ink usage control function is as follows:
 Ink Usage Control
1.
Open the printer driver setup window
2.
Click  Ink Usage Control  on the Maintenance  tab
The  Ink Usage Control  dialog box opens.
3.
If necessary, complete the following settings:
Save Black Ink Controls the consumption of black ink...

•Save Black Ink and Use Composite Black (Immediate Measure)  cannot be used at the same time.
164
 

Managing the Printer PowerThis function allows you to manage the printer power from the printer driver.
The procedure for managing the printer power is as follows:
 Power Off
The  Power Off  function turns off the printer. When you use this function, you will not be able to turn the
printer on from the printer driver.
1.
Open the printer driver setup window
2.
Execute power off
Click  Power Off  on the Maintenance  tab. When the confirmation message appears, click  OK.
The printer power switches off, and...

4.Apply the settings
Click  OK. When the confirmation message appears, click  OK.
The  Maintenance  tab is displayed again.
The setting is enabled after this. If you want to disable this function, select  Disable from the list
according to the same procedure.
Important
•
If you connect this printer to a network and use it by using an AC adapter, you can set  Auto Power Off
but the power will not be turned off automatically.
166
 

Reducing the Printer NoiseThe silent function allows you to reduce the operating noise of this printer. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
 Quiet Settings
1.
Open the printer driver setup window
2.
Click  Quiet Settings  on the Maintenance  tab
The  Quiet Settings  dialog box opens.
Note
•
If the printer is off or if communication between the printer and the...

Changing the Printer Operation ModeIf necessary, switch between various modes of printer operation.
The procedure for configuring  Custom Settings is as follows:
 Custom Settings
1.
Open the printer driver setup window
2.
Make sure that the printer is on, and then click  Custom Settings on the Maintenance
tab
The  Custom Settings  dialog box opens.
Note
•
If the printer is off or if communication between the printer and the computer is disabled, an
error message may appear because the computer cannot...

If an error message is displayed even though the same size that was set is loaded, clear the
check box.
Ink Drying Wait Time You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up...

Changing the Machine Settings Using the Operation Panel
Using the Printer with the Access Point Mode
170