Canon Pc170 User Guide

Operating Procedure
39
2
Various Ways to Copy
Position the original to be copied in black
on the platen glass. Then make a copy.
(See “Normal Copying”, on p. 30.)
SPORTS
NEWS
ABC  stadium
Remove the black cartridge from the
copier and replace it with the blue one.
(See “Replacing Cartridges”, on p.21.)
When the top cover of the copier is
opened, the power will automatically turn
OFF.
After inserting the blue cartridge, close
the top cover and return the platen to the
center position. Then turn the power...

Operating Procedure
40
2
Various Ways to Copy
NOTICE:
•When copying in black and another color,
always be sure to copy in black first.
•When making two-color copies, 16 to 32-lb bond
paper can be used.
•Before inserting the cartridges, always rock
each one left and right to evenly distribute the
toner.
•Take care to smooth out any curls in the copy
paper that may develop while copying and re-
copying.
MEMO:
•Cartridges come in black, red, blue, green and
sepia.
Starter Cartridge (black) is included....

Troubleshooting
41
3Troubleshooting
Troubleshooting
3
When Error Indicators Appear............... 42
When 
 Flashes.................................. 42
When Letters or Numbers Light Up /
Flash.................................................. 43
Clearing Paper Jams
(When 
 Flashes)............................ 44
Cleaning the Paper Roller (When the 
Error Indicator flashes)...................... 46
What to Do If You Suspect
There is a Malfunction........................ 48
Copy Image...

Troubleshooting
42
3
When Error Indicators Appear
When Error Indicators Appear
When something unusual happens to the copier unit, or if there is a
paper jam, an error indicator, letters and/or numbers will light up or flash
in the error message indicator on the control panel.
When  Flashes
If  flashes.Paper jam.
Error Message
Possible CausePossible Remedy
Remove the jammed paper.
(See “Clearing Paper Jams”, on p. 44.)
When Error Indicators Appear
03_PC170-USA06.5.15, 18:28 42
 

Troubleshooting
43
3
When Letters or Numbers Light Up / Flash
If  lights up.
If the power cuts off after 
 lights up.
If 
 then  flash alternately.
If 
 then  flash alternately.
If 
 then  flash alternately.
If paper jams occur often or if 
 lights
up frequently.Out of paper.
The paper in the multi-stack tray is not
loaded correctly.
Something unusual has happened.
Something unusual has happened.
The feeding roller is dirty.
Indicator
Possible CausePossible Remedy
Load the multi-stack tray.
Reload the...

Troubleshooting
44
3
Clearing Paper Jams
(When 
 Flashes)
When a paper jam occurs, follow
the procedure below to locate and
remove the jam.
Align the platen with the  mark by
sliding it to the left.
Press the top cover release button and
open the top cover of the copier.
Check inside the copier for jammed paper.
(See “Removing Jammed Paper”.) Open
the left cover and check there as well, if
necessary.
When Error Indicators Appear
Close the left cover and the top cover.
To resume copying, turn the power...

Troubleshooting
45
3
•If neither edge of the jammed paper is
visible, or if the paper is visible but cannot
be reached by hand, close the top cover
and pull the jammed paper free from the
exit slot.
Gently pull the jammed paper from the
exit slot in the output direction.
If the paper is not visible or is difficult to
pull out, press the left cover release
button. Then fully open the left cover and
remove the jammed paper by pulling
gently as shown.
   Press the left cover release button.
When Error...

Troubleshooting
46
3
 REQUEST:
•Whenever there is a paper jam, even if you can
see the jammed paper from the sides, be sure
to open the top cover and remove the jammed
paper from inside the copier rather than pulling
it out from the sides.
•Do not touch the black roller located inside the
main unit.
Black roller
NOTICE:
•If the jammed paper tears while removing it, be
sure to remove any remaining pieces from
inside the copier.
MEMO:
•When removing jammed paper take care not the
allow the toner on the...

Troubleshooting
47
3
When Error Indicators Appear
NOTICE:
•Wait for the feeding roller to dry completely
before copying.
•Do not use any cleaning sprays to clean the
feeding roller.Press the top cover release button and
open the cover completely.
Wipe clean the roller while turning it in the
direction indicated by the arrows.
Wipe the roller clean while turning it in
the direction of the arrows.
Feeding roller
03_PC170-USA06.5.15, 18:28 47
 

Troubleshooting
48
3
What to Do If You Suspect
What to Do If You Suspect
There is a Malfunction There is a Malfunction
If you suspect there is a malfunction with your copier, before calling a
service representative, check the list below to see if you can solve the
problem yourself.
Copier will not operate.
Power will not turn ON / Power cuts off
during copying.
No copy image appears on copies.The plug is not connected properly to the
outlet.
The power switch is OFF.
The top cover is open.
The left cover...